https://padlet.com/mlian/yayqcny9opco Made with magic en-us 2017-05-23 17:56:52 UTC 2024-12-06 09:29:45 UTC hello@padlet.com https://padlet.com/mlian/yayqcny9opco/wish/173464314

I was inspired to use this picture because  it shows the different sizes of nose cones. Some are sharp and some are flat so it can give us ideas on researching about what is a better nose cone: sharp or flat. When we find out which nose cone is better we will have a better chance of having a good rocket.]]> 2017-05-23 18:09:06 UTC https://padlet.com/mlian/yayqcny9opco/wish/173464314 rsmith242 https://padlet.com/mlian/yayqcny9opco/wish/173464801

I think we should use the top left fin because I have seen that one on a lot of rockets and it is the most comman for me.]]> 2017-05-23 18:11:08 UTC https://padlet.com/mlian/yayqcny9opco/wish/173464801 hmcallister24 https://padlet.com/mlian/yayqcny9opco/wish/173464804 I think we should use this one because because it's good and ready to make]]> 2017-05-23 18:11:08 UTC https://padlet.com/mlian/yayqcny9opco/wish/173464804 https://padlet.com/mlian/yayqcny9opco/wish/173609804

I chose to use this picture and was inspired by it because it shows the length of the rocket, the width and the height with letters which tells me that this will help us figure out how our rocket should work and be like ]]> 2017-05-24 12:42:05 UTC https://padlet.com/mlian/yayqcny9opco/wish/173609804 rsmith242 https://padlet.com/mlian/yayqcny9opco/wish/173610942

I was inspired by this because it has the right sized bottle and I think at the end most peoples like this.]]> 2017-05-24 12:46:41 UTC https://padlet.com/mlian/yayqcny9opco/wish/173610942 https://padlet.com/mlian/yayqcny9opco/wish/173618567

I was inspired to use this picture because it shows different kinds of rocket fins and if we only try one and it doesn't work we won't have any other ideas.]]> 2017-05-24 13:18:51 UTC https://padlet.com/mlian/yayqcny9opco/wish/173618567 hmcallister24 https://padlet.com/mlian/yayqcny9opco/wish/173618661 This is the bottle that were using so find a nose cone that looks like it can fit on the top of the bottle.]]> 2017-05-24 13:19:11 UTC https://padlet.com/mlian/yayqcny9opco/wish/173618661 rsmith242 https://padlet.com/mlian/yayqcny9opco/wish/173618814

I think we should use colorful duck tape to make our rockets pop.]]> 2017-05-24 13:19:46 UTC https://padlet.com/mlian/yayqcny9opco/wish/173618814 https://padlet.com/mlian/yayqcny9opco/wish/173619408

This is the size of the nose cone that will cover the bottle. And we can use the duck tape to make it look colorful.

]]> 2017-05-24 13:22:09 UTC https://padlet.com/mlian/yayqcny9opco/wish/173619408 hmcallister24 https://padlet.com/mlian/yayqcny9opco/wish/173619600 We should have fins at the bottom of our rocket so it goes higher and faster.]]> 2017-05-24 13:22:49 UTC https://padlet.com/mlian/yayqcny9opco/wish/173619600 https://padlet.com/mlian/yayqcny9opco/wish/173619732

I think we should do this with our rocket so it will help the nose cone from falling off the bottle and then we won't be waisting duck tape]]> 2017-05-24 13:23:26 UTC https://padlet.com/mlian/yayqcny9opco/wish/173619732 rsmith242 https://padlet.com/mlian/yayqcny9opco/wish/173620224

I think we should use a balloon as our fuel because if we stick the balloon in the bottle it could shoot up into the air.]]> 2017-05-24 13:25:29 UTC https://padlet.com/mlian/yayqcny9opco/wish/173620224 hmcallister24 https://padlet.com/mlian/yayqcny9opco/wish/173620255 I think our fins should be different colors as well as the tape because I want our rocket to pop. This picture doesn't mean i want the fins different sizes.]]> 2017-05-24 13:25:35 UTC https://padlet.com/mlian/yayqcny9opco/wish/173620255 hmcallister24 https://padlet.com/mlian/yayqcny9opco/wish/173620862 2017-05-24 13:27:53 UTC https://padlet.com/mlian/yayqcny9opco/wish/173620862 https://padlet.com/mlian/yayqcny9opco/wish/173620885

This picture shows the bottle capon the bottom. For force I think we should capture air into the bottle and then when it is ready to launch we could take the bottle cap off and the air force will make it go really high.]]> 2017-05-24 13:27:59 UTC https://padlet.com/mlian/yayqcny9opco/wish/173620885 hmcallister24 https://padlet.com/mlian/yayqcny9opco/wish/173621262 I think we should have something like this but a lot more colorful but it should have a nose cone and fins.]]> 2017-05-24 13:29:28 UTC https://padlet.com/mlian/yayqcny9opco/wish/173621262 https://padlet.com/mlian/yayqcny9opco/wish/173621957

I think we should also use acssesories to make our rocket pop.]]> 2017-05-24 13:32:17 UTC https://padlet.com/mlian/yayqcny9opco/wish/173621957 rsmith242 https://padlet.com/mlian/yayqcny9opco/wish/173622037

i think our rocket should ]]> 2017-05-24 13:32:37 UTC https://padlet.com/mlian/yayqcny9opco/wish/173622037 https://padlet.com/mlian/yayqcny9opco/wish/173661598

First order of business:

• Our nose cone should be like the one Christian was talking about.
  • i.e.

    

    The elliptical cone⬆

Second order of business:

• We have to use the 1st law of motion!!! But, since there is gravity, we must counteract the force. Like Mili said, not to light but not to heavy. 

Final order of business:

• No frivolous decorating

]]> 2017-05-24 16:03:20 UTC https://padlet.com/mlian/yayqcny9opco/wish/173661598 https://padlet.com/mlian/yayqcny9opco/wish/173661754

This nose cone is round but not to flat so I think this nose cone would be the best one for our rocket]]> 2017-05-24 16:04:01 UTC https://padlet.com/mlian/yayqcny9opco/wish/173661754 rsmith242 https://padlet.com/mlian/yayqcny9opco/wish/173661836 That made me think that we should get a scale and weigh our rocket when done so we can get it to go up higher because we would know how much it weighs.]]> 2017-05-24 16:04:29 UTC https://padlet.com/mlian/yayqcny9opco/wish/173661836 hmcallister24 https://padlet.com/mlian/yayqcny9opco/wish/173661896 We need to keep our rockets weight to a minimum so it can go higher. We can't have the rocket way to little either though because then it will be very difficult to even take off.]]> 2017-05-24 16:04:49 UTC https://padlet.com/mlian/yayqcny9opco/wish/173661896 hmcallister24 https://padlet.com/mlian/yayqcny9opco/wish/173662525 For our rocket we need to reduce the drag. How you do this is by making the path up into the sky as smooth as possible ]]> 2017-05-24 16:07:47 UTC https://padlet.com/mlian/yayqcny9opco/wish/173662525 https://padlet.com/mlian/yayqcny9opco/wish/173662755 2017-05-24 16:08:36 UTC https://padlet.com/mlian/yayqcny9opco/wish/173662755 https://padlet.com/mlian/yayqcny9opco/wish/173662836

I think if we put our seltzer bottle upsidown and capture air in the bottle. there will be more force to get it up into the air]]> 2017-05-24 16:09:01 UTC https://padlet.com/mlian/yayqcny9opco/wish/173662836 https://padlet.com/mlian/yayqcny9opco/wish/173662852 2017-05-24 16:09:05 UTC https://padlet.com/mlian/yayqcny9opco/wish/173662852 rsmith242 https://padlet.com/mlian/yayqcny9opco/wish/173662890

I think we should put our fins at the bottom so they touch the floor, unlike this one. ]]> 2017-05-24 16:09:15 UTC https://padlet.com/mlian/yayqcny9opco/wish/173662890 https://padlet.com/mlian/yayqcny9opco/wish/174704110

I think we should use the fins above but longer down like the picture Kolbrun posted because if we use a fin that goes out to much, when it goes up into the air there will be less force because the air is pushing on the fin. We also want out fins to be a good weight because if it's to little then the rocket will be out of control and if it's too heavy then it might not go as high. ]]> 2017-05-31 20:49:10 UTC https://padlet.com/mlian/yayqcny9opco/wish/174704110 https://padlet.com/mlian/yayqcny9opco/wish/174707690 2017-05-31 21:23:07 UTC https://padlet.com/mlian/yayqcny9opco/wish/174707690 https://padlet.com/mlian/yayqcny9opco/wish/174713408 2017-05-31 22:27:00 UTC https://padlet.com/mlian/yayqcny9opco/wish/174713408 https://padlet.com/mlian/yayqcny9opco/wish/174713610 I think we should use these shapes because they are meant to add speed to the rocket since their slopes are steep and they're narrow to limit air resistance. The rocket should be fast because it needs to push up against gravity so it can gain elevation. The fins should be made out of styrofoam because it's lightweight and easily cut. We want the fins to be light so there would be less gravity pulling the rocket down. With styrofoam, any fin shape can be created and will still be light.]]> 2017-05-31 22:29:46 UTC https://padlet.com/mlian/yayqcny9opco/wish/174713610 https://padlet.com/mlian/yayqcny9opco/wish/174715652

I think we should use the top right fin because it is like the one we disscussed and we all liked these fins. They are likethe fins in Kolbrun wrote over there. ------>]]> 2017-05-31 23:00:45 UTC https://padlet.com/mlian/yayqcny9opco/wish/174715652 https://padlet.com/mlian/yayqcny9opco/wish/174856597 2017-06-01 17:18:25 UTC https://padlet.com/mlian/yayqcny9opco/wish/174856597 https://padlet.com/mlian/yayqcny9opco/wish/174887412 We already decided on a fin so there is nothing we relly need to talk about them. Except I like the other fin better, but what ever. Every other picture on this padlet has those fins.]]> 2017-06-01 21:11:37 UTC https://padlet.com/mlian/yayqcny9opco/wish/174887412 https://padlet.com/mlian/yayqcny9opco/wish/176666747 2017-06-16 13:35:21 UTC https://padlet.com/mlian/yayqcny9opco/wish/176666747 rsmith242 https://padlet.com/mlian/yayqcny9opco/wish/176666907 2017-06-16 13:36:52 UTC https://padlet.com/mlian/yayqcny9opco/wish/176666907