A quick glance through the main process, we can see that there are in total 5 main stages with cleaning the water at the start and ending with packaging and sending carbonated drinks to supermarkets

Looking further in the picture, first of all, we can see that Raw water are sent through a filter before being soften and adding chemicals. Afterwards, the liquid is then pumped into electric heaters and go into a cooling pipe to end up mixing with pure Carbon dioxide. Next, the Carbonated water runs through pipes and go into to a mixing tank, where colouring, syrups and flavour are mixed to create familour drinkables such as coke, mountain dew or sting. Subsequently, the product are filtered and conduct into bottles or cans. Ultimately, and after products are then packaged and are sent to supermarkets and shops to go to the hands of ours.

-Loong

The process demonstrates how carbonated water is made. Overall, it is clear that there are five stages in total. In addition, the first step is purifying the raw water and the last step is preparing it for shipping.

Firstly, the liquid is collected before it goes through the filter. After that, the water flow into the water softener and different kinds of chemical to purify. Secondly, the clean liquid is moved through a pump into the electric heaters. Once the water is heated, it flows into a cooling pipe and moves in a container which stores carbon dioxide.

The mixture flows inside a long pipe into a mixing tank. Under the machine are three smaller jars sorted by coloring, syrup, flavor respectively. Once it the liquid goes through a filter, it is separated into bottles or cans. After that it is packed into boxes and ready to be shipped to supermarkets.

First, raw water is filtered, treated with chemicals, and softened. A pump then moves it to the second stage, where it is heated, cooled, and combined with carbon dioxide to create carbonated water.

In the next stage, the carbonated water enters a mixing tank, where colouring, and flavour are added. After mixing, the liquid is filtered more before being filled into bottles and cans. Finally, the drinks are packed into boxes and then delivered to supermarkets for sale.

Overall, the process begins with the purification of water and ends with the distribution of the finished drinks, with carbonation and mixing as the key steps in between.

To begin with the first stage, a man-made factory will transfer the source - raw water - through a filter, then a water softener, added with chemicals and pumped to the 2nd stage. The second stage is about heating evaporation and carbonation, the water go through an electric heater, later then treated by a cooling pipe, and carbonated by a huge amount of carbon dioxide. Moving on to the 3rd stage, the carbonated water now mixed in a tank, along with syrup, coloring and flavours. Just like that, in the 4th stage, the filter does its job and the drinks are made, filled in bottles and cans. Ultimately, stage 5 is where these carbonated drinks get packaged and delivered to supermarkets.

Firstly, raw water from outside comes into the factory. It goes through a filter, then water softener and some chemicals are added. After that, the water is pumped to the next stage.

In stage two, the water is heated by electric heaters. Then it goes through a cooling pipe, and carbon dioxide is added. Now, the water becomes carbonated.

Next, the carbonated water goes to the mixing tank. In this tank, workers add colouring, syrup, and flavour. Then the drink is filtered again and goes into bottles and cans.

In stage five, bottles and cans are packed into boxes. Finally, the boxes are put into a truck and sent to the supermarket.

In conclusion, this process starts with cleaning water and finishes when the drinks are ready for the market.

The diagram illustrates the process of creating carbonated drinks. It involves five stages starting from water cleaning and ending with packaging for drinks to supermarkets.

First of all , raw water goes through a cleaning machine. It flows through a filter then a water softener and chemicals, before being pumped into electric heaters . In the following stage, the heated water is directed through a cooling pipe where they already put carbon dioxide to mix with . As a result carbonated water was created . Subsequently , the carbonated water is moved into a mixing tank. In here, colouring, syrup and flavour are added to mix with carbonated water and create the drink. Before being filtering and filling into bottles and cans at stage four , this drink are being filtered again like in stage one.

In the final stage , these bottles and cans are packaged into boxes and send it to the supermarket

Overall, the process consists of five main stages, beginning with the cleaning of raw water and ending with the packaging and distribution of the finished product. The steps include physical, chemical, and mechanical processes to ensure the drinks are safe, flavoured, carbonated, and properly sealed.

In the first stage, raw water from storage is passed through a filter, and then softened using chemicals. A pump then moves the treated water to the next stage. Following this, the water is heated using electric heaters, then cooled in a pipe before carbon dioxide is added, resulting in carbonated water.

Next, in the next stage, the carbonated water enters a mixing tank, where colouring, syrup, and flavourings are added. The mixture is then filtered again to remove any impurities. This leads into the next stage, where the drink is filtered and filled into bottles and cans.

In the final stage, the bottles and cans are packaged into boxes, which are then loaded onto trucks for transportation to supermarkets.

To summarise, the production of carbonated drinks is a linear and systematic process that incorporates water treatment, carbonation, mixing, and packaging, ensuring the drinks are ready for retail distribution.

During the first stage, raw water is cleaned by the filler. Once the water is all clear and drinkable, they the water softener and safe chemicals are added.

Following that __ is heating evaporation and carbonation stage where bubbly context drinks are made, the liquid passes through a pump and gets heated by an electric heater then flows into a cooling pipe, after that it then gets mixed with carbon dioxide and turned into carbonated water

Moving into the next stage, the final result water ends up in the mixing tank where it is combined with colouring, syrup and flavour in order to become soda.

After that, the soda liquid is filled in bottles and cans. Finally, these products are packed into boxes, loaded on trucks and sent to supermarkets.

Initially, raw water is passed through a filter and mixed with chemicals. At this point, it is pumped into an electric heater. Following this, the water moves through a cooling pipe, and carbon dioxide is added to it. Subsequently, the mixture enters a mixing tank, where colouring, syrup, and flavour are added. The liquid is then filtered again. In the following stage, the finished drink is filled into bottles and cans. In the last stage, the products are packaged and transported to supermarkets for sale.

Ultimately, carbonated drinks are produced in a step-by-step process from water to packaging.