https://padlet.com/avalencia/xgp4dqazxj3f en-us 2016-12-05 14:45:23 UTC 2025-10-13 21:15:45 UTC hello@padlet.com avalencia https://padlet.com/avalencia/xgp4dqazxj3f/wish/141754018 The Wolf's Head]]> 2016-12-05 14:51:27 UTC https://padlet.com/avalencia/xgp4dqazxj3f/wish/141754018 avalencia https://padlet.com/avalencia/xgp4dqazxj3f/wish/141755140 This project was the most time consuming for me. The project required a lot of work to make every detail. First, I separated my design into two parts, what would be on the top and what would be on the bottom. Then I glued my designs to sheet metal and sawed out the lines. The mouth and the eyes use negative space, so I had to saw them out of the metal. It took a few days to do this. I made a mistake when sawing out the wolf, I mistakenly gave the wolf an underbite. A noticeable flaw. The next step is to use the drill press to pierce out the eye. The next and most difficult step for me was sodering the pieces together. It was very difficult for me because my project was very detailed. I had to soder every opening. I sodered near the snout and the back of the wolf's head. Then I went to the polishing station to polish and clean the soot out of the little openings. ]]> 2016-12-05 14:54:06 UTC https://padlet.com/avalencia/xgp4dqazxj3f/wish/141755140