Here are the degrees of rotation that are the best to use:

12 sections - 30*

10 sections - 36*

8 sections - 45*

6 sections - 60*

• Take a screenshot of your letter using Snip & Sketch and post under your name in the Turn In tab. Label it Day 1.

• Take a screenshot of your word using Snip & Sketch and post under your name in the Turn In tab. Label it Day 2

• Change the settings of the pencil tool to the settings shown below.

• Choose a letter and convert it to curves.

• Duplicate the letter

• Using the pencil tool, draw a scrollwork shape to extend a part of the letter. The new pencil setting will allow your drawing to be automatically added to the letter.

• Take a screenshot of your letter & new altered letter using Snip & Sketch and post under your name in the Turn In tab. Label it Day 3

Use a very thick text for this bellwork. Choose a letter and follow the steps in the demo video.

1. For a straight cut, hold down the alt button while drawing the cut line.

2. For the rotate tool choose the center point on the letter and then click on the corner of the letter.

   
   

• Take a screenshot of your word using Snip & Sketch and post under your name in the Turn In tab. Label it Day 5

1. Draw 2 triangles with the Pen tool

2. Make 1 triangle a lighter color, 1 a darker color

3. With the white select arrow, click-hold-drag to select 1 anchor from each triangle

4. Do the same for the next 2 anchors

   
   

• Take a screenshot of your new 3D looking pyramid using Snip & Sketch and post under your name in the Turn In tab. Label it Day 6

1. Draw a square & duplicate it 5 times

2. Make 1 circle larger than the 6 squares

3. With the black arrow, select all of the shapes

4. Select the Objects/Object on Path

   
   

• Take a screenshot of your new design using Snip & Sketch and post under your name in the Turn In tab. Label it Day 7

1. Choose a 3 letter word & type it in BOLD upper case

2. Set the tracking for the word very close

3. Using shapebuilder take out parts of the middle letter to create a positive/negative space word.

• Take a screenshot of your new design using Snip & Sketch and post under your name in the Turn In tab. Label it Day 8

1. Make a letter using the shape & scissor tool

2. Using the Distort/Roughen then Distort/Pucker-bloat to create fur

• Take a screenshot of your new design using Snip & Sketch and post under your name in the Turn In tab. Label it Day 9

1. Draw a line

2. Use the Effect/Distort Transform/Transform to add design

3. Add bullet point endings on both ends of the lines

4. Create an outline with a bold letter

5. Use Object/Clipping Mask to put design into letter

• Take a screenshot of your new design using Snip & Sketch and post under your name in the Turn In tab. Label it Day 10

1. Draw a circle & add a gradient

2. Duplicate circle

3. Select both shapes and make them a compound path

4. Effect/Path/Offset path - make it .4 inches with joins Round

5. Effect/Path/Offset path - make it -.4 inches with joins Round

6. Move the larger circle to have the merged shapes interact

7. Hold the alt key and drag the larger circle to get another circle to interact with

• Take a screenshot of your new design using Snip & Sketch and post under your name in the Turn In tab. Label it Day 11

1. draw a circle

2. Select Type on a Path tool

3. Select the BOTTOM of the circle to place text

4. Use all uppercase when typing your word

5. Make the Paragraph Text centered

6. Add a color and a contrasting outline

• Take a screenshot of your new design using Snip & Sketch and post under your name in the Turn In tab. Label it Day 12

1. Duplicate your chosen photo

2. Rasterize the photo

3. Choose the Object/Create Object Mosaic

4. Number of tiles 3 high, 3 wide

5. Experiment with the Object Mosaic - what happens when the grid is 20x20? 30x30?

   
   

• Take a screenshot of your photo and color palette using Snip & Sketch and post under your name in the Turn In tab. Label it Day 13

1. Split word in half

2. Open perspective grid

3. Choose left side for first part of the word

4. Choose second side for the last part of the word

5. Expand appearance of your 2 warped text to change color

   
   

• Take a screenshot of your altered word using Snip & Sketch and post under your name in the Turn In tab. Label it Day 14

1. Select your chosen photo

2. Choose the Object/Create Object Mosaic

3. Number of tiles 2 high, 3 wide

4. Select your 6 color tiles

5. Create a new swatch group in the swatches tool area

6. Create swatch information

   
   

• Take a screenshot of your image, swatches and information for each color using Snip & Sketch and post under your name in the Turn In tab. Label it Day 15

• NO OUTLINE for your star shapes

• Make 2 flowers, change the color of your second flower with the gradient tool.

• Take a screenshot of your 2 flowers using Snip & Sketch and post under your name in the Turn In tab. Label it Day 17

• Click/hold/drag mouse to extend and rotate the glare & light rays around the source. Letting go will apply the effect.

• Off to the side, click & let go to place the lens flare

• Take a screenshot of your original sunset & the altered sunset using Snip & Sketch and post under your name in the Turn In tab. Label it Day 18

• EPS textured background (see below)

• GROUPED, Image traced Vectorized logo from the internet

• Take a screenshot of your logo & the logo with texture using Snip & Sketch and post under your name in the Turn In tab. Label it Day 20

1. Find an online logo - circle or oval shape

2. Draw a circle or oval

3. Place the logo inside of the shape using Object/Clipping Path/Make

4. Find 2 online black & white textured backgrounds

5. Apply first transparency mask to logo with black & white textured background

6. Unclip & reduce opacity of just the texture

7. Duplicate logo

8. Release the mask on the second logo and apply the second texture

9. Add a colored background

• Take a screenshot of your masked image using Snip & Sketch and post under your name in the Turn In tab. Label it Day 21

• Choose a capital letter

• Draw a line that overlaps the letter multiple times

• Select Intertwine and select the area of the line you want to appear behind the letter.

• Take a screenshot of your intertwined letter using Snip & Sketch and post under your name in the Turn In tab. Label it Day 25

1. Follow the demo video to create an Op Art upper case T

• Take a screenshot of your image using Snip & Sketch and post under your name in the Turn In tab. Label it Day 23

1. Follow the demo video to create an editable word in gold in PHOTOSHOP

• Take a screenshot of your image using Snip & Sketch and post under your name in the Turn In tab. Label it Day 26

1. Follow the demo video to create a lined background that is distorted with a letter

2. Right Click to get the dropdown menus in the layers

• Take a screenshot of your image using Snip & Sketch and post under your name in the Turn In tab. Label it Day 27

1. Download this logo

2. Grid is 9 columns x 11 rows

3. Follow the demo video to recreate the logo

4. Add colors you like to the logo and use a white background

• Take a screenshot of your image using Snip & Sketch and post under your name in the Turn In tab. Label it Day 28

1. Download a black EPS Husky logo

2. Choose a darker colored background & lock that layer

3. Follow the demo video to recreate the logo so it looks more like the logo on the right

• Take a screenshot of your image using Snip & Sketch and post under your name in the Turn In tab. Label it Day 29