Torque Wrench by

We’re Ready!

2023-10-31 05:38:41 UTC

Exercise

2023-10-31 05:40:10 UTC

2023-10-31 05:40:19 UTC

Torque check

Check for conditions

saltyong1508 — 2023-10-31 05:40:20 UTC

Reset the value

2023-10-31 05:40:23 UTC

Exercise it

See due date

Exercise the torque wrench

2023-10-31 05:40:23 UTC

Before

2023-10-31 05:40:32 UTC

Exercise torque wrench
Digital Torque Verifier

Check for cal

2023-10-31 05:40:33 UTC

2023-10-31 05:40:39 UTC

DTT

Excercise

Ensure calibration date is correct

Set value to 20% of highest value after use

2023-10-31 05:40:45 UTC

Check Calibration Due date

Exercise torque wrench at usage value

Set back to zero after use

Clock DTT

Torque verifier

2023-10-31 05:40:51 UTC

2023-10-31 05:40:56 UTC

Check cal due date and reset torque

DTT

2023-10-31 05:41:08 UTC

2023-10-31 05:41:12 UTC

Set to minimum value after used, exercise the wrench before usage

2023-10-31 05:41:18 UTC

Before

Check general condition

Check Calibration due date

After

Test the torque to ensure it’s still within limit

Set back to 0 after use

2023-10-31 05:41:19 UTC

Check for calibration date

Exercise

2023-10-31 05:41:26 UTC

Pre Use check:

Cal validity
No damage

Post Use check:

Reset to lowest value
Kept back in protective case

2023-10-31 05:41:26 UTC

1) Cycle through highest torque value 6 times for mechanical torque wrench

2) Check calibration sticker for torque wrench

Need to make it to the highest value and try it 6 times on the tester system

2023-10-31 05:41:27 UTC

Check for missing screws or loose parts

2023-10-31 05:41:29 UTC

2023-10-31 05:41:36 UTC

Before use check cal due date and exercise

After use set to min value

2023-10-31 05:41:37 UTC

Before: Check cal date and value of torque wrench is what u need

After: Reset to minimum calibration, keep back in case if not using anymore.

Torque wrench

2023-10-31 05:41:39 UTC

Check due date, check torque wrench for damage.

Set the torque load to minimum, put in box for safe keeping

Post-use test on Digital Torque Verifier

2023-10-31 05:41:40 UTC

Reset torque wrench to minimum value (Not lower than the indicated minimum torque value)

After

2023-10-31 05:41:43 UTC

Reset value to lowest
Take down serial number for documentation purpose

2023-10-31 05:42:09 UTC

check torque wrench if there is any damage

check cal due date

2023-10-31 05:42:16 UTC

Before using check nsd and calibration.

After check if it is back to minimum value.

2023-10-31 05:42:23 UTC

Verify & record using DTT after usage.

2023-10-31 05:42:25 UTC

Before usage:

Check for Cal date and condition
Exercise torque wrench

After usage

Set to minimum value after usage

Make sure tools check is done first

2023-10-31 05:42:43 UTC

Recalibrate

2023-10-31 05:45:35 UTC

2023-10-31 05:45:36 UTC

Send for repair / calibration.

2023-10-31 05:45:39 UTC

Inform TOOLS IC

2023-10-31 05:45:41 UTC

Send for calibration

2023-10-31 05:45:44 UTC

Send it for re-cal

Send for calibration

2023-10-31 05:45:49 UTC

2023-10-31 05:45:50 UTC

Quarantine and send for recal

Isolate the torque wrench, make sure nobody use it.

2023-10-31 05:46:00 UTC

Inform TMDE ICs to send it for calibration

2023-10-31 05:46:01 UTC

Report to NgKC

2023-10-31 05:46:12 UTC

Report to tools IC and send item to calibration.

2023-10-31 05:46:13 UTC

Send for Calibration validation

Report to Tools IC, stop using the torque wrench and set aside so other people won't use.

2023-10-31 05:46:15 UTC

2023-10-31 05:46:19 UTC

Quarantine & not use.

2023-10-31 05:46:21 UTC

Verify the accuracy of the torque wrench against the Digital Torque Verifier

2023-10-31 05:46:25 UTC

Open Reporting

2023-10-31 05:46:32 UTC

Inform TMDE IC/SIC

Send the wrench for calibration

Stop using it

2023-10-31 05:46:38 UTC

2023-10-31 05:46:41 UTC

Tell tmde ic to send out for cal

2023-10-31 05:46:44 UTC

Report to Tools IC and send the affected tools for re-calibration

Do not use the dropped torque wrench on maintenance work

2023-10-31 05:46:45 UTC

Tell ME3 Tan Chee Keong

2023-10-31 05:46:53 UTC

Send for cal

Replace the torque wrench with statues lable so no one will use the dropped wrench.

2023-10-31 05:47:22 UTC

2023-10-31 05:48:27 UTC

stop using it and inform tmde ic to send for calibration

2023-10-31 05:49:13 UTC

Aflo say so

2023-10-31 05:49:33 UTC

The spring is too compressed to give accurate reading

AFLO stated

2023-10-31 05:49:43 UTC

2023-10-31 05:49:51 UTC

Most inaccurate range due to the spring and clicking mechanicism not being calibrated

2023-10-31 05:50:01 UTC

Might not be accurate and within the required limit for the task

2023-10-31 05:50:01 UTC

AFLO say cannot

Because torque wrench has a range of +- so if use the lowest, the value maybe below the lowest value.

2023-10-31 05:50:06 UTC

2023-10-31 05:50:21 UTC

Mj say de

2023-10-31 05:50:26 UTC

Maintenance Standard

2023-10-31 05:50:27 UTC

The internal spring is too loose to give an accurate reading.

2023-10-31 05:50:43 UTC

AFLO not allowed

2023-10-31 05:51:09 UTC

Inaccuracy of value

2023-10-31 05:51:14 UTC

Ineffective of the spring below 20%

2023-10-31 05:52:30 UTC

2023-10-31 06:01:18 UTC

15 * 5 = 75

0.17x5 (kgm)

2023-10-31 06:02:29 UTC

2023-10-31 06:03:01 UTC

85

2023-10-31 06:03:01 UTC

2023-10-31 06:03:17 UTC

5x9.81x15 = TA

TA x 15 / 15 + 4 = answer

2023-10-31 06:03:57 UTC

5kg x 9.81 m/s^2 = 49.05N

0.15m x (0.04m/2) x 49.05N = 8.3385Nm

2023-10-31 06:05:58 UTC

Breathing is a powerful, effective, and instant way to return the body and mind to the present and experience the many benefits of mindfulness and centering. Williams and Penman (2016) suggest using a three-minute

2023-10-31 06:06:57 UTC

15Nm

15

2023-10-31 06:07:07 UTC

2023-10-31 06:07:41 UTC

15Nm