-Ice Cube under light= Did not melt

-Ice Cube in hands= Melted almost right away

-Ice Cube in water= Melted Quickly

It connects to thermal energy because different types of heat melt the same things at different speed. It connects to change of state is that it makes the object hotter so it makes it melt quicker.

- It connects to thermal energy because that's how things melt faster.

- It connects to change of state because the ice cube is changing from a solid to a liquid

This is related to thermal energy because the things we used sped up the melting proses.

The ice changes the state because it makes the ice hotter and makes it melt faster and change from a solid to a liquid.

it connects to it because that's how it melts faster.

it connects to change of state cause the ice is melting at a certain point and changing shape

• the thermal energy was cold so we put it in warm places so that it would make it warm.

• it connects to change of state because it started out as a solid and then it started to melt down and turned into a liquid.

  
  

-And it connects to thermal energy because it shows different ways ice can melt through thermal energy.

-it connects by showing how the ice went from a solid to a liquid.

2.) It connects because thermal energy makes the ice cube melt.

3.) It connects to state of change because it went from solid to liquid, and it became liquid when it reached its melting point.

it connects to thermal energy beacasue the ice stole the waters thermal energy:(

it connects to the change of state because it turned from a solid to a liquid

and then it just melted, and the cup was hot and there was just a puddle and melted in 15 seconds.

-Ice cube on desk

Just didn't melt it still hasn't melted, I think. It's still cold and barely any water in cup from ice melting.

-Ice cube in hands

Melted very slow but faster than it just being on the desk. Hurt Kevins hands and it melts very slow i think slowest out of all the things we tried.

-Ice cube in hot water

Just melted into the cup and became part of the water. connects to thermal energy because hot water is boiling and very hot and all those vibrating molecules affect ice cube and heat it up causing it to melt.

• It connects to thermal energy because we used body temperature and a microwave.

-The ice cube that was in hands and breathed on, melted slow & got smaller and wetter.

-the ice cube in hot water melted the fastest and is disappears

-the one is paper towel in the notebook did not melt but is broke apart into small pieces.

This connects to thermal energy because the one that was in hot what melted quickie because is was the warmest one. different types of heat ether melted the ice cube slower or faster. the warmer the substance was the faster is melted.

-It connects to thermal energy because a buncha heat was being added to the one in the microwave, so it melted very fast, and he put it in for 2 minutes.

-It connects to change of state because when a lot of thermal energy is added to a solid, it becomes a liquid.

2).it connects to thermal energy because that's how things melt faster

3). it connects to state of change because it went from a sold to a liquid

-ice in hands=kinds melted almost

-ice on desk=not melted

-ice in warm water=melted slower and overtime.

The lab is connect to thermal energy because the different object that produce heat to melted the ice at different sppeed, it connect to state because the more energy produce causes the object to melt faster

• it connects to the thermal by the tempter of the warm water and that's why it melted so fast because the ice cube is used to very cold.

• it changes to states of matter because the solid change to a liquid with the liquid.

Hands- it melted very fast, froze my hand :(

Hot water- melted extremely fast, as expected.

Normal room temp- melted pretty fast no effort needed.

It connects to thermal energy because of the heat, and the different amounts of it to melt the ice. The heat makes the molecules vibrate causing a reaction forming a liquid instead of ice.

It connects to the change of state because once the ice was melted, it turned to a liquid, water.

• It connects to thermal energy because it shows how it melts faster.

  
  

• And it connects to change of state because it went from solid to liquid.

  
  

‣ It connects to thermal energy because we used heat to melt the ice cubes.

‣ It connects to change of state because since we were trying to melt the ice cubes, trying to change it's state of matter, we can assume that is how it's comparable.

It connects to the change of state because it went from a solid to a liquid.

It connects because the ice melted

It connects because it melted

.

It connects to thermal energy because,

you I was trying to melt the ice Cude.

. It connects because, it did connect to the thermal energy.

• And it connects to thermal energy because the molecules in the ice slowed down the fast molecules in our hand. It made our hand as cold as the ice and didn't melt it fast.

• And it connect change of state because when we put it into the hot water it slowly changed the ice into water.

2) And it connects to thermal energy because it has to do with heat.

3) And it connects to change of state because it changed from a solid to a liquid, which is called melting

It connects to thermal energy because my hand didn't have enough thermal energy to melt the ice cube.

it connects to change of state because it went from a complete a solid to a liquid.

Ice cube in microwave = melted under a minute

Ice cube under light =did not melt

Ice cube with hot water = melted very fast

It connected to thermal energy because the different ways of heat melt melted at different speeds.

•And how it connects to thermal energy it's like changing the state of the ice.

•It connects to the change of state because it goes from a solid to a liquid.

-This connects to thermal energy because the reason that the ice melted dis because it was increasing in thermal energy which meant that the molecules started to move faster, causing it to melt.

-This connects to change of state because the ice is changing from a solid to a liquid by the change of state called melting.

Ice cube under the lamp - longest to melt

Ice cube under hot water - took 10 secs to melt

Ice cube in the microwave - took 40 secs to melt

Ice Cube under hot water - took 10 seconds to melt.

Ice Cube under a lamp - took the longest to melt.

Ice Cube in a microwave - took 40 seconds to melt

-Ice in water melted really fast

-Somebody used their breath and that didn't really melt it.

-It connects to thermal energy because the different heat from all the experiments is different based on the state of matter the ice cube ended up in.

We tested ice in your hand, ice in water, ice under a light, and one on the desk. We observed that depending on on the environment the ice would melt faster or slower. The hotel the environment the more quickly it would melt for example the one in hot water melted quicker because the water was hotter than room temperature.

This is related to thermal energy because the things we used sped up the melting proses.

The ice changes the state because it makes the ice hotter and makes it melt faster and change from a solid to a liquid.