Command Prompt by Kat

Ping

2017-10-02 09:16:17 UTC

The ping command is used to verify that a device can communicate with another device or site.

Netsh winsock reset

2017-10-02 09:17:19 UTC

Reset the network adapter

Netstat explained

2017-10-02 09:17:38 UTC

The netstat command is a Command Prompt command used to display very detailed information about how your computer is communicating with other computers or network devices.

Hexadecimal

2017-10-02 09:18:00 UTC

Divide number by 16. This results in 408 remainder 14.
E (14 in hex) goes into the first box from the right.

40*16=6528 6542-6528=14 <- this is the Remainder.

As soon as the numbers go above 9 in Hexadecimal we use letters, this would mean 10 is A, 11 is B and so on, 15 would be F. So 14=E

2017-10-02 09:18:08 UTC

2017-10-02 09:18:23 UTC

Gonna crush them

2017-10-02 09:35:45 UTC

When you fail the exam

Systeminfo

2017-10-02 09:36:26 UTC

Displays the system information on Command Prompt including Manufacturer, Model, system type, memory and updates installed.

Binary - Hexadecimal Conversion

2017-10-02 09:45:33 UTC

1 1 0 1
8 + 4 + 0 + 1 = 13 = D
10 = A
11 = B
12 = C
13 = D
14 = E
15 = F

CD.. is the command to change the directory

2017-10-02 09:45:53 UTC

ipconfig:

2017-10-02 09:45:59 UTC

Shows your current IP configuration such as IPv4 address, Sub net mask and Default gateway

2017-10-02 09:47:14 UTC

2017-10-02 09:47:26 UTC

telnet cmds

System info:

2017-10-02 09:47:40 UTC

Tells you information about your computer system.

Dir:

2017-10-02 09:48:14 UTC

The Dir command is used to display a list of files and sub folders within a folder and the size of them.

KNOWLEDGE

2017-10-02 09:48:59 UTC

SYSTEM KNOWLEDGE

Mkdir

2017-10-02 09:49:11 UTC

Creates a folder within your current directory on command prompt.

2017-10-02 09:49:47 UTC

Move

2017-10-02 09:54:09 UTC

Moves a folder to the specified directory

del

2017-10-02 09:55:41 UTC

Deletes the specified Folder

ls

2017-10-02 09:56:03 UTC

List folders within current directory

System Info

2017-10-02 09:56:46 UTC

Systeminfo

Displays detailed configuration information about a computer and its operating system, including operating system configuration, security information, product ID, and hardware properties, such as RAM, disk space, and network cards.

Syntax

systeminfo[.exe] [/s Computer [/u Domain\User [/p Password]]] [/fo {TABLE|LIST|CSV}] [/nh]

Top of page

Parameters

/s Computer : Specifies the name or IP address of a remote computer (do not use backslashes). The default is the local computer.

/u Domain\ User : Runs the command with the account permissions of the user specified by User or Domain\User. The default is the permissions of the current logged on user on the computer issuing the command.

/p Password : Specifies the password of the user account that is specified in the /u parameter.

/fo { TABLE | LIST | CSV } : Specifies the format to use for the output. Valid values are TABLE, LIST, and CSV. The default format for output is LIST.

/nh : Suppresses column headers in the output. Valid when the /fo parameter is set to TABLE or CSV.

/? : Displays help at the command prompt.

Netstat

2017-10-02 10:03:28 UTC

Netstat

Displays active TCP connections, ports on which the computer is listening, Ethernet statistics, the IP routing table, IPv4 statistics (for the IP, ICMP, TCP, and UDP protocols), and IPv6 statistics (for the IPv6, ICMPv6, TCP over IPv6, and UDP over IPv6 protocols). Used without parameters, netstat displays active TCP connections.

Syntax

netstat [-a] [-e] [-n] [-o] [-p Protocol] [-r] [-s] [Interval]

Top of page

Parameters

-a : Displays all active TCP connections and the TCP and UDP ports on which the computer is listening.

-e : Displays Ethernet statistics, such as the number of bytes and packets sent and received. This parameter can be combined with -s.

-n : Displays active TCP connections, however, addresses and port numbers are expressed numerically and no attempt is made to determine names.

-o : Displays active TCP connections and includes the process ID (PID) for each connection. You can find the application based on the PID on the Processes tab in Windows Task Manager. This parameter can be combined with -a, -n, and -p.

-p Protocol : Shows connections for the protocol specified by Protocol. In this case, the Protocol can be tcp, udp, tcpv6, or udpv6. If this parameter is used with -s to display statistics by protocol, Protocol can be tcp, udp, icmp, ip, tcpv6, udpv6, icmpv6, or ipv6.

-s : Displays statistics by protocol. By default, statistics are shown for the TCP, UDP, ICMP, and IP protocols. If the IPv6 protocol for Windows XP is installed, statistics are shown for the TCP over IPv6, UDP over IPv6, ICMPv6, and IPv6 protocols. The -p parameter can be used to specify a set of protocols.

-r : Displays the contents of the IP routing table. This is equivalent to the route print command.

Interval : Redisplays the selected information every Interval seconds. Press CTRL+C to stop the redisplay. If this parameter is omitted, netstat prints the selected information only once.

/? : Displays help at the command prompt.

Joe B Needs A Hookup, Hit Him Up - DO IT YASMIN

2017-10-02 10:08:34 UTC

07943 589460

NSLOOKUP

2017-10-02 12:52:50 UTC

Nslookup -exit | Exits nslookup.
Nslookup -finger | Connects with the finger server on the current computer.
Nslookup -help | Displays a short summary of nslookup subcommands.
Nslookup -ls | Lists information for a DNS domain.
Nslookup -lserver | Changes the default server to the specified DNS domain.
Nslookup -root | Changes the default server to the server for the root of the DNS domain name space.
Nslookup -server | Changes the default server to the specified DNS domain.
Nslookup -set | Changes configuration settings that affect how lookups function.
Nslookup -set all | Prints the current values of the configuration settings.
Nslookup -set class | Changes the query class. The class specifies the protocol group of the information.
Nslookup -set d2 | Turns exhaustive Debugging Mode on or off. All fields of every packet are printed.
Nslookup -set debug | Turns Debugging Mode on or off.
Nslookup -set defname | Appends the default DNS domain name to a single component lookup request. A single component is a component that contains no periods.
Nslookup -set domain | Changes the default DNS domain name to the name specified.
Nslookup -set ignore | Ignores packet truncation errors.
Nslookup -set port | Changes the default TCP/UDP DNS name server port to the value specified.
Nslookup -set querytype | Changes the resource record type for the query.
Nslookup -set recurse | Tells the DNS name server to query other servers if it does not have the information.
Nslookup -set retry | Sets the number of retries.
Nslookup -set root | Changes the name of the root server used for queries.
Nslookup -set search | Appends the DNS domain names in the DNS domain search list to the request until an answer is received. This applies when the set and the lookup request contain at least one period, but do not end with a trailing period.
Nslookup -set srchlist | Changes the default DNS domain name and search list.
Nslookup -set timeout | Changes the initial number of seconds to wait for a reply to a request.
Nslookup -set type | Changes the resource record type for the query.
Nslookup -set vc | Specifies to use or not use a virtual circuit when sending requests to the server.
Nslookup -view | Sorts and lists the output of the previous ls subcommand or commands.

ADVANCED CMD MAGIC

2017-10-02 12:57:30 UTC

shutdown -s -t 00

While loop

2017-10-03 10:40:04 UTC

Yesterday i took an iq test but instead of the usual questions they showed me an episode of Rick and Morty and asked me to explain all of the jokes. Since i'm a genius I was easily able to do so. I explained all the references from the fact that "bird person" is based off Greek mythology, to the theory that Rick is inspired from a character in ancient mongol literature. As a result they told me I have an iq of 190 if not higher. I pity the peasants who think It's a show like any other.

work work work be like...

2017-10-03 14:43:53 UTC

bgyvtvbuhj,lxc ju mk dv v

Pseudocode Instructions

girithlain — 2026-03-02 11:48:46 UTC