carton

gifst wrap

Tools:

silicone

ruler

pencil

scissors

instructions:

1- First, trace and cut the following squares in the carton.

2- Then, in the square A, mark the following lines.

3-Later on the lines padte the square E.

4-After that, paste the square D behind.

5-Then, paste the square D behind.

6-Later, paste the squares C on the sides of the square D.

7-After that, paste the square B as the image shows.

8-Finally, fold with the gift wrap.

•Carton

•Gift wrap

Tools:

•Scooter

•Scissors

•Ruler

•Pencil

Instructions:

1-First cut the pieces.

2-Second put together the pieces principals.

3-Thrid glue whole the pieces.

4-Fourth glue the base of under.

5-Fifth cover with gift wrap whole the organizer of carton.

6-Finally place you like detail.

• 10 bottle caps

•Carton box

•Sheets of paper

•Watercolor of different colors

•Big elastic bands

Tools:

• Scissors or cutter

• Pencil

• Ruler

• Hot silicone

• Paintbrushes

instructions:

1. First, cut the carton box in a rectangule of 45×20 centimeters, after cut 4 pieces of carton of 45×3 centimeters.

2.Then, glue the strips of 4 pieces of carton. After this, cut 6 strips of 18.5×3 centimeters, glue the strips together in pairs to create 2 thicker strips.

3.After that, glue them to the edges of the rectangular frame. take remaining strip and cut a slit in the center measuring 2.5 centimeters long and 1 centimeter wide glue this piece in the middle of the box.

4.Finally, make two holes at each end of the box. Then glue them at each end of the box.

5.Now, now, paint 5 bottle caps one color and another 5 caps a different color. Now, you have your PUCKET Game ready to play with your friends.

• Paper

• Paint

• Glitter foam paper

Tools:

• Scissors

• Pencil

• Ruler

• Glue

• Paintbrushes

Instructions:

1. First, fold the paper of 41*3.5 centimeters and do this procedure 40 times.

2. Then, place a horizontal strip on the table and then glue the top of the vertical strip until you reach the end of the horizontal.

3. Then, you do this procedure again, creating another one and then joining the two ends to form a bag.

4. After that, you tress the horizontal strip with the vertical strips until the height of the strip ends.

5. Later, we make two strips of paper to 41*3.5 centimeters to stick on the bag.

6. Finally, you start to paint the bag and make flowers with the foam paper and then glue it as decoration.

   ᴄᴏɴɢʀᴀᴛᴜʟᴀᴛɪᴏɴꜱ

   ʏᴏᴜ ᴍᴀᴅᴇ ᴀ ᴘᴀᴘᴇʀ ʙᴀɢ

   🎉🎉

-One bottle

-Cartun

-Chopsti

-Badges

-Sorbets

Tools:

-sicssors

-silicone

-rule

• 8 carboard tubes

• Hot silicone

• Gun of silicone

• Wool

• 12 Wooden sticks

• Scissors

Instructions

• FIRST Ford the 8 card board tubes for the half

• THEN wrap with the wool

• AFTER that cut a nibble of cartón tosize egg containes

• THEN glue the cardboard with the egg contrainer

• AFTER that make the shape of the egg holder , gloing the wod - lineel paper rolls to the egg containes

• NEXT cut the shewer sticks at the height of the egg holder

• THEN glue the jute rope to the edge of the egg holder to decorate

• FINALLY make the jute braids to from the handles , gloing it the finishing touch by making opcional decoration

• 4 bottles of 500 to 700ml and 1 bottle of 1L

• 2 wooden chopsticks

• 2 rubber bands

• Scissors

  Steps

First, collect 4 plastic bottles of 300 to 500ml and 1 bottles of liter

Next, we make holes in the sides and bottom of the small bottles and make fow diagonal holes for the large bottle

Then, we Will put the chopsticks onda the bottles in the shope of on X

After,we Will put the rubber bands on the chopsticks to hold the bottles

Finally, ready to try it.

Tools:

• Cúter

• Scissors

• Screwdriver

• Silicone

Instructions:

• First, cut plastic bottle for size part.

• Then, make 5 holes inside the bottle with screwdriver and put the 3 Wooden sticks.

• After that, insert the plastic caps in to the Wooden sticks.

• Later, cut another bottle from the mouth part about 6cm to make the motor

• Finally, make a hole in the lid so that you can join it with the stick and tie it to the stick with the rubber bands. now if we finish the project

  
  

-cardboard

-balloons

-Skewer sticks

-plastic taps

-colored leaves

-Frosty Corrospun

tools:

-cutter

-scissors

-screwdriver

-silicone

Instructions:

-First, with the cardboard, recreate the templates of a bus model.

-then, with the corrospun, paste on top of the bus templates on all the pieces.

-after that, Glue all the pieces together until you can form the bus

-Finally, with the skewer sticks, make the square structure that will hold the balloon and, with these same ones, make the tires so that it rolls.

-now, Inflate the balloon and stick it on the square structure that you made and, READY, YOU HAVE YOUR NEW AND RECYCLED AEROSTATIC TOY BUS