https://padlet.com/mwilkinson25/clayproject Take a photo of your clay project. Think about the before and after...How are they similar and different? What did you learn from this project? What would you do differently? en-us 2017-12-06 15:36:26 UTC 2025-10-17 15:57:47 UTC hello@padlet.com mwilkinson25 https://padlet.com/mwilkinson25/clayproject/wish/213844033 Here is a photo of my pinch pot with lid before the bisque firing. I did a nice job with craftsmanship and attaching seams. Once I underglaze my pinch pot with lid, the color choice really emphasises my design. Next time, I would make sure I do a gloss finish so my artwork is shiny when it comes out of the kiln.]]> 2017-12-06 18:21:19 UTC https://padlet.com/mwilkinson25/clayproject/wish/213844033 mwilkinson25 https://padlet.com/mwilkinson25/clayproject/wish/213847180 2017-12-06 18:26:54 UTC https://padlet.com/mwilkinson25/clayproject/wish/213847180 https://padlet.com/mwilkinson25/clayproject/wish/214239348 I created a pinch pot with a lid called "There's a Princess in a Tower". I added a tower on top of my lid by using the score and slip method. I had it fired once in the kiln but I want it to be fired again. If I could change something it would be to make the lid more fitted with the base. This project taught me how to create a pinch pot with my own personal theme]]> 2017-12-07 17:43:19 UTC https://padlet.com/mwilkinson25/clayproject/wish/214239348 https://padlet.com/mwilkinson25/clayproject/wish/214257535 For my clay pinch pot project I have went for a simplistic, modern design. The clay pinch pot was meant to have a blue lid and white base, but now it has a green base because their was no option for a white base that was available. ]]> 2017-12-07 18:17:41 UTC https://padlet.com/mwilkinson25/clayproject/wish/214257535 gilberto_2175053 https://padlet.com/mwilkinson25/clayproject/wish/214262301 My pot was light gray before and now I painted it white.I learned how to make a pinch pot from this project.I would make a lid that fits better on the pot.]]> 2017-12-07 18:28:37 UTC https://padlet.com/mwilkinson25/clayproject/wish/214262301 https://padlet.com/mwilkinson25/clayproject/wish/214262336 My before project it was like a mat color before it was all shiny. I pick bright colors for my Pinch pot so whenever I will put the glaze on the clay it will be brighter and shiny. Another reason because i was doing a theme of the season summer or spring look.]]> 2017-12-07 18:28:42 UTC https://padlet.com/mwilkinson25/clayproject/wish/214262336 https://padlet.com/mwilkinson25/clayproject/wish/214265038 I did this pinch pot because it is a Christmas 🎄 gift for my mom. I designed my punch pot as a mug for my mom. My mom loves coffee ☕️ so that is why I did my punch pot. ]]> 2017-12-07 18:34:13 UTC https://padlet.com/mwilkinson25/clayproject/wish/214265038 https://padlet.com/mwilkinson25/clayproject/wish/214272078 My clay pot was very bland but unfortunately I did not get a picture before I painted it and the painted version makes me satisfied. P.S. I broke it]]> 2017-12-07 18:47:28 UTC https://padlet.com/mwilkinson25/clayproject/wish/214272078 https://padlet.com/mwilkinson25/clayproject/wish/214327727 I designed it after my favorite tv show. The flash. My family loves th flash so I did it]]> 2017-12-07 20:48:39 UTC https://padlet.com/mwilkinson25/clayproject/wish/214327727 https://padlet.com/mwilkinson25/clayproject/wish/214367720 2017-12-08 01:22:09 UTC https://padlet.com/mwilkinson25/clayproject/wish/214367720 https://padlet.com/mwilkinson25/clayproject/wish/214373136 My project is a cup shape kind of that you turn on its side to put your phone in,there is a slit in the top.I think it could have been a little better if I smoothed it more and if the kiln was working]]> 2017-12-08 02:24:01 UTC https://padlet.com/mwilkinson25/clayproject/wish/214373136 https://padlet.com/mwilkinson25/clayproject/wish/214384071 This Is how my Pinch Pot looks like. It is like a flowery pot and it autally has four main colors blue, green, peach, and yellow.

I made my pot out of clay and I did the main steps how to make the pot/lid. It took me two try's to make the pot and I had to learn how to smooth out the cracks. So when I put it in the kilm it can be really smooth.

My before- Pinch Pot is just a matt color with no shine to it .
All I did was make the pot, I design it , and then painted. That's was it . 

After- But I wanted my pot to be shiny, so I have to put the glase on my pot. Then put it in the kilm so it can dry

]]> 2017-12-08 04:42:34 UTC https://padlet.com/mwilkinson25/clayproject/wish/214384071 https://padlet.com/mwilkinson25/clayproject/wish/214385713 This is my after photo]]> 2017-12-08 05:06:49 UTC https://padlet.com/mwilkinson25/clayproject/wish/214385713 https://padlet.com/mwilkinson25/clayproject/wish/214551712 2017-12-08 16:19:53 UTC https://padlet.com/mwilkinson25/clayproject/wish/214551712 https://padlet.com/mwilkinson25/clayproject/wish/214551738 I learned a lot about making a clay pot. Something that I would do different is make the pot bigger and a different lid.

]]> 2017-12-08 16:19:56 UTC https://padlet.com/mwilkinson25/clayproject/wish/214551738 https://padlet.com/mwilkinson25/clayproject/wish/214557495 A hard, Hard project iv'e done by far Iv'e never has this much trouble to make such a little thing but it, sorta worked out. Picture N/A]]> 2017-12-08 16:31:44 UTC https://padlet.com/mwilkinson25/clayproject/wish/214557495 https://padlet.com/mwilkinson25/clayproject/wish/214561090 A hard hard project I've done by far, I've never had this much trouble to make such a little thing but it worked out. ]]> 2017-12-08 16:40:17 UTC https://padlet.com/mwilkinson25/clayproject/wish/214561090 https://padlet.com/mwilkinson25/clayproject/wish/214577361 My pinch pot is a gnome. This is my before picture of my gnome. I feel that it looks okay. If I could fix something on my gnome I would make the tip of the lid (hat) up higher and make the lid less dense. After I painted it I saw how it was all going to come together and it looked pretty good. They are both the same looking without the paint and there is not a big difference with paint. When I put the clear over glaze on it and let it dry it looked completely different. I can’t wait to see how it turns out after the second firing. My after photo has my gnome with a red hat (lid) and a black base. The nose is a tan color. I think I chose the right colors to paint my gnome

]]> 2017-12-08 17:18:50 UTC https://padlet.com/mwilkinson25/clayproject/wish/214577361 https://padlet.com/mwilkinson25/clayproject/wish/214577789 My pinch pot is a about marvel and my color is blue and black.I couldn't put red because they didn't have any so I but blue.My pinch pot does not have a cap because it fell of while I was walking and broke.]]> 2017-12-08 17:20:00 UTC https://padlet.com/mwilkinson25/clayproject/wish/214577789 https://padlet.com/mwilkinson25/clayproject/wish/214579232 my art work is a cool design and is blue and yellow]]> 2017-12-08 17:23:57 UTC https://padlet.com/mwilkinson25/clayproject/wish/214579232 https://padlet.com/mwilkinson25/clayproject/wish/214592469 I don't have a picture but i learned you need patience for this project.
If i had more clay, I think my project would look better, i would take more time to do it too.]]> 2017-12-08 17:59:28 UTC https://padlet.com/mwilkinson25/clayproject/wish/214592469 https://padlet.com/mwilkinson25/clayproject/wish/214597515 Something that was challenging while making this for me was basically just molding the clay. Glazing it wasn't very hard. Something that I thought I could do differently when I was finished with the project was that I could have made it a mushroom and the cap of the mushroom would be the lid and the body would have been the pot. The cap would've been red with white dots and the body would've been an off-white. This is like my before because it is still clay. It is different because there is color on the clay. I learned that I should've done a mushroom.]]> 2017-12-08 18:12:19 UTC https://padlet.com/mwilkinson25/clayproject/wish/214597515 https://padlet.com/mwilkinson25/clayproject/wish/214598069 we dont have a picture but at the start it was trey and now its colored and hard.

]]> 2017-12-08 18:13:42 UTC https://padlet.com/mwilkinson25/clayproject/wish/214598069 https://padlet.com/mwilkinson25/clayproject/wish/214598948 2017-12-08 18:16:05 UTC https://padlet.com/mwilkinson25/clayproject/wish/214598948 https://padlet.com/mwilkinson25/clayproject/wish/214599239 2017-12-08 18:16:54 UTC https://padlet.com/mwilkinson25/clayproject/wish/214599239 https://padlet.com/mwilkinson25/clayproject/wish/214599972 2017-12-08 18:18:35 UTC https://padlet.com/mwilkinson25/clayproject/wish/214599972 https://padlet.com/mwilkinson25/clayproject/wish/214600172 My clay piece is glazed and ready to put in the kiln.]]> 2017-12-08 18:19:09 UTC https://padlet.com/mwilkinson25/clayproject/wish/214600172 https://padlet.com/mwilkinson25/clayproject/wish/214601844 This is my before and after drawing for a baby cartoon penguin. The drawing on the left is a failure. It is a torso. It was like that because mostly I was impatient and I was frustrated.
The picture on the right is when I decided to have patience and draw the baby penguin fully complete, then I had to color it. And what I learned to be patient. Not everything in life is gonna come quickly. And that is something I could undersrand. They have no similarities.
The difference is that, before was left unfinished, and the right was completely done.]]> 2017-12-08 18:23:01 UTC https://padlet.com/mwilkinson25/clayproject/wish/214601844 https://padlet.com/mwilkinson25/clayproject/wish/214603411 I learned a lot of patience is needed to make a pinch pot. If I had more time I would have put some more color detail in my art project.]]> 2017-12-08 18:26:56 UTC https://padlet.com/mwilkinson25/clayproject/wish/214603411 https://padlet.com/mwilkinson25/clayproject/wish/214603869 mine was probably not the hardest one in the class to do but i still had fun doing it. Picture none. P.S it is spelled hunny not Honey. ]]> 2017-12-08 18:27:58 UTC https://padlet.com/mwilkinson25/clayproject/wish/214603869 https://padlet.com/mwilkinson25/clayproject/wish/214606081 I tried to make a rectangular clay and then put a Tesla symbol but it really doesn't look good.]]> 2017-12-08 18:33:50 UTC https://padlet.com/mwilkinson25/clayproject/wish/214606081 https://padlet.com/mwilkinson25/clayproject/wish/214607198 Its a clay pear. The lid broke so its a cut pear. ]]> 2017-12-08 18:36:38 UTC https://padlet.com/mwilkinson25/clayproject/wish/214607198 https://padlet.com/mwilkinson25/clayproject/wish/214611585 The lid broke because of someones stupidity. So its just 3/4 of my actual project. But its something, and at least I get a grade. ]]> 2017-12-08 18:48:27 UTC https://padlet.com/mwilkinson25/clayproject/wish/214611585 https://padlet.com/mwilkinson25/clayproject/wish/214632889 This is my clay project it is a phone amplifier . Ifeel i did alright on craftsmanship .rom this project I learned how to make a coil vessel and transform it into a phone amplifier. They are similar because they both are clay but when it’s not glazed or already been fired it is wet and gray. The way I would do it differently is to make it altitude bigger because my phone is bigger.]]> 2017-12-08 19:44:11 UTC https://padlet.com/mwilkinson25/clayproject/wish/214632889 https://padlet.com/mwilkinson25/clayproject/wish/214638608 2017-12-08 19:59:57 UTC https://padlet.com/mwilkinson25/clayproject/wish/214638608 https://padlet.com/mwilkinson25/clayproject/wish/214639749 When I first started my project it had no color and was not very neat 
Now it has color and more detail]]> 2017-12-08 20:03:28 UTC https://padlet.com/mwilkinson25/clayproject/wish/214639749 https://padlet.com/mwilkinson25/clayproject/wish/214641159 when i first did my project it had no details now it does. one thing i would do differently is to smooth my clay so it doesn't brake.]]> 2017-12-08 20:08:05 UTC https://padlet.com/mwilkinson25/clayproject/wish/214641159 https://padlet.com/mwilkinson25/clayproject/wish/214642483 Something that i would change for next time is to smooth out tbe walls before actually bending it becuase when is was trying to bend the clay coils were almost coing to fall off.]]> 2017-12-08 20:12:49 UTC https://padlet.com/mwilkinson25/clayproject/wish/214642483 https://padlet.com/mwilkinson25/clayproject/wish/214644059 My project is blue but it is recently white. It is a phone amplifier. You put your phone on top of the speaker and sound comes out the side. I think my project has a very nice design.
I think I could have done a little better but I am happy on the way it tuned out. It does work with my huge phone and with smaller ones. My project is a nice blue/purple tint of ombrey. My project has a pretty vine design on the side and back. Next time I do clay I will try to make it a little bit bigger]]> 2017-12-08 20:17:48 UTC https://padlet.com/mwilkinson25/clayproject/wish/214644059 https://padlet.com/mwilkinson25/clayproject/wish/214649135 My project is painted with different colors like sky blue,purple,and blue. It is supposed to be a horse. It doesn't look like one but I tried. Something I would change would be the eyes. One thing I like about my project is the colors. I am actually surprised that my phone doesn't fall off. I think I did a pretty good job.]]> 2017-12-08 20:39:07 UTC https://padlet.com/mwilkinson25/clayproject/wish/214649135 https://padlet.com/mwilkinson25/clayproject/wish/214649831 My project looks like a frog but I didn't mean to make it look like a frog. I tried to make my clay project look like a face that has an open mouth and small eyes. I didn't get to finish the inside. I also couldn't make my phone fit because I didn't have enough clay. My goal next time is to finish the clay project. I am pretty proud of what I did with my clay.]]> 2017-12-08 20:42:47 UTC https://padlet.com/mwilkinson25/clayproject/wish/214649831 https://padlet.com/mwilkinson25/clayproject/wish/214678790 This was Kenny head and a grave with it says too Kenny Mckormick 

Jenny's head was going to be full orange and the grave was dark gray and the ground was going to be brown and green were was the phone holder supposed to go

]]> 2017-12-09 03:32:09 UTC https://padlet.com/mwilkinson25/clayproject/wish/214678790 https://padlet.com/mwilkinson25/clayproject/wish/214678875 My project is very curvy with some pushed out things on the front of it like a lighting bolt on the front. It is red and yellow with a tad of brown in the inside of it and a tad bit of it on the front. My theme was "Rioting Flash." I really like the flash but that is what I went for.

]]> 2017-12-09 03:34:51 UTC https://padlet.com/mwilkinson25/clayproject/wish/214678875 https://padlet.com/mwilkinson25/clayproject/wish/215087442 My project was a little difficult to make for reasons. I was supposed to make a frog but some person decided to mess it up soo I had to redo it but it wasn’t goodbye because i didn’t have to much time and the clay was already sort of hard so it’s like a weird lookin dinosaur thing and I colored it orange, because I Felt like it, it’s also has Little details on it too]]> 2017-12-11 16:15:59 UTC https://padlet.com/mwilkinson25/clayproject/wish/215087442 https://padlet.com/mwilkinson25/clayproject/wish/215094021 the before clay project is not painted and bare. the after clay broject is glazed and fired in the kiln i think. they are not similar they are diferent because on is not painted and one is. i paint it orange and green because i felt like it and it is perfect i think ]]> 2017-12-11 16:27:53 UTC https://padlet.com/mwilkinson25/clayproject/wish/215094021 https://padlet.com/mwilkinson25/clayproject/wish/215096073  The picture is

 ]]> 2017-12-11 16:31:39 UTC https://padlet.com/mwilkinson25/clayproject/wish/215096073 https://padlet.com/mwilkinson25/clayproject/wish/215097742 My project is a cupcake it is pink, blue, orange, and yellow. It looks different because it has the glaze on and it looks white. Something I learned from this project was that it was harder than I thought but it was worth it. I would make the lid differently because it has a small hole at the top.

 ]]> 2017-12-11 16:34:46 UTC https://padlet.com/mwilkinson25/clayproject/wish/215097742 https://padlet.com/mwilkinson25/clayproject/wish/215153365 My clay project represents a sort of succeeding attempt of  an amplifier it had chipped off of a peice but it is still it still works as a mini amplifier it doesn't have much boost but was psm. ]]> 2017-12-11 18:22:36 UTC https://padlet.com/mwilkinson25/clayproject/wish/215153365 https://padlet.com/mwilkinson25/clayproject/wish/215156156 My clay project represents a amplifier of Winnie the pooh eating  hunny and the hunny jar is the amplifier.]]> 2017-12-11 18:27:31 UTC https://padlet.com/mwilkinson25/clayproject/wish/215156156 https://padlet.com/mwilkinson25/clayproject/wish/215158158 The before one was just clay and coils and scoring. and when we heated it the clay got hard. Then I painted it. I learned hot to score , coil, and slip.]]> 2017-12-11 18:31:13 UTC https://padlet.com/mwilkinson25/clayproject/wish/215158158 https://padlet.com/mwilkinson25/clayproject/wish/215160561 My clay project represents ]]> 2017-12-11 18:35:58 UTC https://padlet.com/mwilkinson25/clayproject/wish/215160561 https://padlet.com/mwilkinson25/clayproject/wish/215166316 Before it was a totally different thing After it turned into a boat]]> 2017-12-11 18:47:22 UTC https://padlet.com/mwilkinson25/clayproject/wish/215166316 https://padlet.com/mwilkinson25/clayproject/wish/215172106 Clay ]]> 2017-12-11 18:57:39 UTC https://padlet.com/mwilkinson25/clayproject/wish/215172106 https://padlet.com/mwilkinson25/clayproject/wish/215200508 The original was gonna be a human like figure, but it ended up being a bowl because of time. I learned how to shape clay, and how to use tools. I wish I could've been able to build the full human like figure, so I hope to manage my time better in future projects]]> 2017-12-11 19:55:28 UTC https://padlet.com/mwilkinson25/clayproject/wish/215200508 https://padlet.com/mwilkinson25/clayproject/wish/215201732 2017-12-11 19:58:40 UTC https://padlet.com/mwilkinson25/clayproject/wish/215201732 https://padlet.com/mwilkinson25/clayproject/wish/215201969 They are similar because they are both monster like creatures and different because the final one ended up being an un-dead mammal rather then reptile. I learned a lot more about working with clay and about creating bone structure out of clay. What I would do differently is make it more realistic rather than keeping it with little to no teeth and I’d make the under skin of the eye more realistic]]> 2017-12-11 19:59:15 UTC https://padlet.com/mwilkinson25/clayproject/wish/215201969 https://padlet.com/mwilkinson25/clayproject/wish/215207062 It looked different because I took the eyes out so it would look better.I learned that I need to take my time next time. I'm going to make my clay project look smoother.

]]> 2017-12-11 20:11:37 UTC https://padlet.com/mwilkinson25/clayproject/wish/215207062 https://padlet.com/mwilkinson25/clayproject/wish/215211861 2017-12-11 20:24:50 UTC https://padlet.com/mwilkinson25/clayproject/wish/215211861 https://padlet.com/mwilkinson25/clayproject/wish/215222459 My project that i have been working on is a dragon curled around a rocky hill. The lid is a oval white egg perched at the top of the hill just a few centimeters away from the dragon's wings and nose. ]]> 2017-12-11 21:00:10 UTC https://padlet.com/mwilkinson25/clayproject/wish/215222459 https://padlet.com/mwilkinson25/clayproject/wish/215232077 I forgot to take a picture before but I took one after. I learned that clay takes time and you have to work with it and wrap it up or it will dry up and get hard. Something I would do differently is follow directions and work harder.

]]> 2017-12-11 21:37:11 UTC https://padlet.com/mwilkinson25/clayproject/wish/215232077 https://padlet.com/mwilkinson25/clayproject/wish/215235422 2017-12-11 21:52:06 UTC https://padlet.com/mwilkinson25/clayproject/wish/215235422 https://padlet.com/mwilkinson25/clayproject/wish/215236290 My project was going to be the OverWatch badge symbol and the pot was going to be a brown stool like thing. My project ended up getting smashed on the day we we're supposed to turn it in, so I ended up making McCree's hat badge.]]> 2017-12-11 21:56:03 UTC https://padlet.com/mwilkinson25/clayproject/wish/215236290 https://padlet.com/mwilkinson25/clayproject/wish/215236677 Well before it went into the kiln, it was squishy and very dark. after the fact, it was very light and hard. I learned that you have to be very careful will your art work after its been cooked.I would paint it differently

]]> 2017-12-11 21:58:09 UTC https://padlet.com/mwilkinson25/clayproject/wish/215236677 https://padlet.com/mwilkinson25/clayproject/wish/215237540 Before my clay pot went into the kiln it was very light form able. Then once my clay was out of kiln, it was hard as a rock.]]> 2017-12-11 22:02:51 UTC https://padlet.com/mwilkinson25/clayproject/wish/215237540 https://padlet.com/mwilkinson25/clayproject/wish/215253836 before i put my artwork in the kiln it was soft and a grey color after, it looked as if it was a whale, and an entirely different color.

]]> 2017-12-11 23:59:39 UTC https://padlet.com/mwilkinson25/clayproject/wish/215253836 https://padlet.com/mwilkinson25/clayproject/wish/215255792 My project was based on a teapot and a coffee mug. So I created a lid that you could pour liquids. and i didn't create a spout but I did create a Little curve on one of the edges so you can pour it out and sip from it. So i was originally going to create a teapot but my dad asked me why don't make me a coffee mug and i said ok so that's what inspired me creating a piece like this]]> 2017-12-12 00:23:16 UTC https://padlet.com/mwilkinson25/clayproject/wish/215255792 https://padlet.com/mwilkinson25/clayproject/wish/215257345 before it was in the kiln i was very easy to shape and was soft and gooey ]]> 2017-12-12 00:40:20 UTC https://padlet.com/mwilkinson25/clayproject/wish/215257345 https://padlet.com/mwilkinson25/clayproject/wish/215257434 After my pinch  pot  was taken out of the kiln it was was very hard it wasn't as easy to move it was like a statue 

]]> 2017-12-12 00:41:24 UTC https://padlet.com/mwilkinson25/clayproject/wish/215257434 https://padlet.com/mwilkinson25/clayproject/wish/215493957 2017-12-12 16:28:46 UTC https://padlet.com/mwilkinson25/clayproject/wish/215493957 vincent_1484597 https://padlet.com/mwilkinson25/clayproject/wish/215534083 I would make it more stable so it didn't fall apart and I would put more paint on it and make it better. I used the tools and paint and kennal to make it better and underglaze. My thoughts on the project is that I can do better next time]]> 2017-12-12 17:45:07 UTC https://padlet.com/mwilkinson25/clayproject/wish/215534083 https://padlet.com/mwilkinson25/clayproject/wish/215536210 I would of done is that is a bender from Futurama but I would do bender I would do him but I would not do other characters but they are hard to do the other characters ]]> 2017-12-12 17:49:07 UTC https://padlet.com/mwilkinson25/clayproject/wish/215536210 https://padlet.com/mwilkinson25/clayproject/wish/215612010 i made mine look like a cross over beetween a robot and a goblin]]> 2017-12-12 20:41:17 UTC https://padlet.com/mwilkinson25/clayproject/wish/215612010 https://padlet.com/mwilkinson25/clayproject/wish/215631087 i made a circle with 4 holes in the sides to hold the pot and the lid is split in half but it is made so that you can pick it up from the outside and i put a color tan on the lid and black and yellow on the circle




]]> 2017-12-12 21:57:42 UTC https://padlet.com/mwilkinson25/clayproject/wish/215631087 https://padlet.com/mwilkinson25/clayproject/wish/215661550 I made my pinch pot with clay and sculpting tools. I took my time and finished on time. It turned out well with a hole at the top, and an ombre look on the pot. The lid broke in half and it is painted a bunch of different colors. I like how it turned out I just don't like the lid because it broke.]]> 2017-12-13 02:54:19 UTC https://padlet.com/mwilkinson25/clayproject/wish/215661550 https://padlet.com/mwilkinson25/clayproject/wish/215664336 my pinch pot is carl the cupcake becuase thats one of my brothers favorite characters in five nights at freddys four the tools i used was the scrapper to scrape the buttoms and inside out and i used slip and score to put on the eyeballs teeth and candle i used the coil way technic to make the candel and flame then squished the flame. next time i would do more scoring on the candel]]> 2017-12-13 03:30:29 UTC https://padlet.com/mwilkinson25/clayproject/wish/215664336 https://padlet.com/mwilkinson25/clayproject/wish/215983974 I was aiming for some type of emerald color but the color didn't really turn out well. I decided to make the size smaller than usual. I didn't have enough time to make a lid so if i could change anything about it I would've liked to make a lid for my work.]]> 2017-12-13 20:42:36 UTC https://padlet.com/mwilkinson25/clayproject/wish/215983974 https://padlet.com/mwilkinson25/clayproject/wish/215985472 I made my pinch pot with clay and sculpting tools. I like how it turned out but I wish it could have been way better. I don’t mind how it looks but I feel like I could do better if I took more time. My pinch pot is colored with green, purple, and blue glaze. On my lid it has a handle that is a ball. I feel as if it could still be better. Maybe next time, if there is a next time..]]> 2017-12-13 20:48:10 UTC https://padlet.com/mwilkinson25/clayproject/wish/215985472 vincent_1484597 https://padlet.com/mwilkinson25/clayproject/wish/217622150 I made the bape symbol from my favorite clothing brand and I added a different cooler way to make it a lot more creative]]> 2017-12-21 02:04:01 UTC https://padlet.com/mwilkinson25/clayproject/wish/217622150 https://padlet.com/mwilkinson25/clayproject/wish/240245333 i couldn't do ]]> 2018-03-09 16:40:57 UTC https://padlet.com/mwilkinson25/clayproject/wish/240245333