Code arduino by Ihere Iheremak https://padlet.com/ihereiheremak/v6xstblsnful9jx6 en-us 2025-07-03 08:59:19 UTC 2025-09-17 07:03:35 UTC hello@padlet.com 7 segment abc ihereiheremak https://padlet.com/ihereiheremak/v6xstblsnful9jx6/wish/3509508213 import controlP5.*;

import processing.serial.*;

import cc.arduino.*;

import ddf.minim.*;

ControlP5 cp5;

Arduino arduino;

Minim minim;

AudioPlayer[] sounds = new AudioPlayer[10];

int a=2, b=3, c=4, d=5, e=6, f=7, g=8, dp=9;

int buttonPin = 12;

int count = 1;

boolean lastButtonState = false;

void setup() {

size(300, 400);

cp5 = new ControlP5(this);

cp5.addButton("RESET").setPosition(100, 350).setSize(100, 30);

arduino = new Arduino(this, "COM11", 57600);

int[] pins = {a, b, c, d, e, f, g, dp};

for (int i = 0; i < pins.length; i++) {

arduino.pinMode(pins[i], Arduino.OUTPUT);

arduino.digitalWrite(pins[i], Arduino.HIGH);

}

arduino.pinMode(buttonPin, Arduino.INPUT);

minim = new Minim(this);

for (int i = 1; i <= 9; i++) {

sounds[i] = minim.loadFile("t" + i + ".mp3");

}

showDigit(count);

}

void draw() {

boolean buttonState = arduino.digitalRead(buttonPin) == Arduino.HIGH;

if (buttonState && !lastButtonState) {

count++;

if (count > 9) count = 1;

showDigit(count);

if (sounds[count] != null) {

sounds[count].rewind();

sounds[count].play();

}

delay(300);

}

lastButtonState = buttonState;

}

void controlEvent(ControlEvent theEvent) {

if (theEvent.getController().getName().equals("RESET")) {

count = 1;

showDigit(count);

}

}

void showDigit(int num) {

switch (num) {

case 1: showChar(false,true,true,false,false,false,false); break;

case 2: showChar(true,true,false,true,true,false,true); break;

case 3: showChar(true,true,true,true,false,false,true); break;

case 4: showChar(false,true,true,false,false,true,true); break;

case 5: showChar(true,false,true,true,false,true,true); break;

case 6: showChar(true,false,true,true,true,true,true); break;

case 7: showChar(true,true,true,false,false,false,false); break;

case 8: showChar(true,true,true,true,true,true,true); break;

case 9: showChar(true,true,true,true,false,true,true); break;

default: showChar(false,false,false,false,false,false,false); break;

}

}

void showChar(boolean aS, boolean bS, boolean cS, boolean dS, boolean eS, boolean fS, boolean gS) {

arduino.digitalWrite(a, aS ? Arduino.LOW : Arduino.HIGH);

arduino.digitalWrite(b, bS ? Arduino.LOW : Arduino.HIGH);

arduino.digitalWrite(c, cS ? Arduino.LOW : Arduino.HIGH);

arduino.digitalWrite(d, dS ? Arduino.LOW : Arduino.HIGH);

arduino.digitalWrite(e, eS ? Arduino.LOW : Arduino.HIGH);

arduino.digitalWrite(f, fS ? Arduino.LOW : Arduino.HIGH);

arduino.digitalWrite(g, gS ? Arduino.LOW : Arduino.HIGH);

arduino.digitalWrite(dp, Arduino.HIGH);

}


]]> 2025-07-03 08:59:36 UTC https://padlet.com/ihereiheremak/v6xstblsnful9jx6/wish/3509508213 7 segment 1-9 ihereiheremak https://padlet.com/ihereiheremak/v6xstblsnful9jx6/wish/3509508278 import controlP5.*;

import processing.serial.*;

import cc.arduino.*;

import ddf.minim.*;

ControlP5 cp5;

Arduino arduino;

Minim minim;

AudioPlayer[] sounds = new AudioPlayer[10];

int a = 2, b = 3, c = 4, d = 5, e = 6, f = 7, g = 8, dp = 9;

int count = 1;

void setup() {

size(300, 400);

cp5 = new ControlP5(this);

cp5.addButton("NEXT").setPosition(50, 150).setSize(80, 40);

cp5.addButton("RESET").setPosition(170, 150).setSize(80, 40);

arduino = new Arduino(this, "COM8", 57600);

int[] pins = {a, b, c, d, e, f, g, dp};

for (int i = 0; i < pins.length; i++) {

arduino.pinMode(pins[i], Arduino.OUTPUT);

arduino.digitalWrite(pins[i], Arduino.HIGH);

}

minim = new Minim(this);

for (int i = 1; i <= 9; i++) {

sounds[i] = minim.loadFile("t" + i + ".mp3");

}

showDigit(count);

}

void draw() {

background(0);

fill(255);

textSize(20);

textAlign(CENTER);

text("Current: " + count, width / 2, 100);

}

void controlEvent(ControlEvent theEvent) {

String name = theEvent.getController().getName();

if (name.equals("NEXT")) {

count++;

if (count > 9) count = 1;

showDigit(count);

if (sounds[count] != null) {

sounds[count].rewind();

sounds[count].play();

}

} else if (name.equals("RESET")) {

count = 1;

showDigit(count);

if (sounds[count] != null) {

sounds[count].rewind();

sounds[count].play();

}

}

}

void showDigit(int num) {

switch (num) {

case 1: showChar(false,true,true,false,false,false,false); break;

case 2: showChar(true,true,false,true,true,false,true); break;

case 3: showChar(true,true,true,true,false,false,true); break;

case 4: showChar(false,true,true,false,false,true,true); break;

case 5: showChar(true,false,true,true,false,true,true); break;

case 6: showChar(true,false,true,true,true,true,true); break;

case 7: showChar(true,true,true,false,false,false,false); break;

case 8: showChar(true,true,true,true,true,true,true); break;

case 9: showChar(true,true,true,true,false,true,true); break;

default: showChar(false,false,false,false,false,false,false); break;

}

}

void showChar(boolean aS, boolean bS, boolean cS, boolean dS, boolean eS, boolean fS, boolean gS) {

arduino.digitalWrite(a, aS ? Arduino.LOW : Arduino.HIGH);

arduino.digitalWrite(b, bS ? Arduino.LOW : Arduino.HIGH);

arduino.digitalWrite(c, cS ? Arduino.LOW : Arduino.HIGH);

arduino.digitalWrite(d, dS ? Arduino.LOW : Arduino.HIGH);

arduino.digitalWrite(e, eS ? Arduino.LOW : Arduino.HIGH);

arduino.digitalWrite(f, fS ? Arduino.LOW : Arduino.HIGH);

arduino.digitalWrite(g, gS ? Arduino.LOW : Arduino.HIGH);

arduino.digitalWrite(dp, Arduino.HIGH);

}


]]> 2025-07-03 08:59:42 UTC https://padlet.com/ihereiheremak/v6xstblsnful9jx6/wish/3509508278 Tralalero Tralala namek3002 https://padlet.com/ihereiheremak/v6xstblsnful9jx6/wish/3510534238 2025-07-04 07:42:46 UTC https://padlet.com/ihereiheremak/v6xstblsnful9jx6/wish/3510534238 อุณภูมิ dht22 ihereiheremak https://padlet.com/ihereiheremak/v6xstblsnful9jx6/wish/3520594536 #include <DHT.h> #define DHTPIN 4 #define DHTTYPE DHT22 #define sw1 7 #define sw2 8 DHT dht(DHTPIN, DHTTYPE); #include <Wire.h> #include <Adafruit_GFX.h> #include <Adafruit_SSD1306.h> #define SCREEN_WIDTH 128 #define SCREEN_HEIGHT 64 #define OLED_RESET -1 #define SCREEN_ADDRESS 0x3C Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET); int x; int set_t=26; void setup() { Serial.begin(9600); if(!display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS)) { Serial.println(F("SSD1306 allocation failed")); for(;;); } dht.begin(); pinMode(sw1, INPUT); pinMode(sw2, INPUT); } void loop(){ int st1 =digitalRead(sw1);delay(200); int st2 =digitalRead(sw2);delay(200); display.clearDisplay(); display.setTextColor(WHITE,BLACK); display.drawLine(64,0,64,48,WHITE); display.drawLine(0,15,128,15,WHITE); display.drawLine(0,50,128,50,WHITE); display.setTextColor(WHITE,BLACK); display.setCursor(23,0); display.setTextSize(1); display.println("TEM"); display.setCursor(89,0); display.println("HUM"); display.setCursor(50,25); display.println("*c"); display.setCursor(120,25); display.println("%"); display.setCursor(0,55); display.println("SET"); delay(2000); float h = dht.readHumidity(); float t = dht.readTemperature(); if (isnan(h) || isnan(t)) { Serial.println("Failed to read from DHT sensor!"); return; } display.setCursor(15,25); display.setTextSize(1); display.print(t); display.setCursor(83,25); display.setTextSize(1); display.print(h); display.setCursor(64,60); display.setTextSize(1); if(st1==0){ x++; display.println(x); } if(st2==0){ x--; display.println(x); } display.display(); delay(200); }]]> 2025-07-16 01:21:44 UTC https://padlet.com/ihereiheremak/v6xstblsnful9jx6/wish/3520594536 อุณภูมิ dht11 ihereiheremak https://padlet.com/ihereiheremak/v6xstblsnful9jx6/wish/3520636487 #include <Wire.h>

#include <DHT.h>

#include <Adafruit_GFX.h>

#include <Adafruit_SSD1306.h>

#define DHTPIN 26

#define DHTTYPE DHT11

DHT dht(DHTPIN, DHTTYPE);

#define SCREEN_WIDTH 128

#define SCREEN_HEIGHT 64

#define OLED_RESET -1

#define SCREEN_ADDRESS 0x3C

Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET);

int set_t = 26;

void setup() {

Serial.begin(115200);

Wire.begin(21, 22);

if (!display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS)) {

Serial.println(F("SSD1306 allocation failed"));

while (true);

}

dht.begin();

}

void loop() {

float h = dht.readHumidity();

float t = dht.readTemperature();

if (isnan(h) || isnan(t)) return;

display.clearDisplay();

display.setTextColor(WHITE, BLACK);

display.drawLine(64, 0, 64, 48, WHITE);

display.drawLine(0, 15, 128, 15, WHITE);

display.drawLine(0, 50, 128, 50, WHITE);

display.setCursor(23, 0);

display.setTextSize(1);

display.println("TEM");

display.setCursor(89, 0);

display.println("HUM");

display.setCursor(15, 25);

display.print(t);

display.setCursor(50, 25);

display.println("*c");

display.setCursor(83, 25);

display.print(h);

display.setCursor(120, 25);

display.println("%");

display.setCursor(0, 55);

display.println("SET");

display.setCursor(64, 60);

display.setTextSize(1);

display.display();

delay(2000);

}


]]> 2025-07-16 01:44:00 UTC https://padlet.com/ihereiheremak/v6xstblsnful9jx6/wish/3520636487 dht11 ihereiheremak https://padlet.com/ihereiheremak/v6xstblsnful9jx6/wish/3520698730 #define BLYNK_TEMPLATE_ID "เอาของมึงมาใส่" #define BLYNK_TEMPLATE_NAME "เอาของมึงมาใส่" #define BLYNK_AUTH_TOKEN "เอาของมึงมาใส่" #include <Wire.h> #include <DHT.h> #include <WiFi.h> #include <WiFiClient.h> #include <BlynkSimpleEsp32.h> #include <Adafruit_GFX.h> #include <Adafruit_SSD1306.h> char ssid[] = "electronic24"; char pass[] = "1234567890"; #define DHTPIN 26 #define DHTTYPE DHT11 DHT dht(DHTPIN, DHTTYPE); #define SCREEN_WIDTH 128 #define SCREEN_HEIGHT 64 #define OLED_RESET -1 #define SCREEN_ADDRESS 0x3C Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET); float t, h; void setup() { Serial.begin(115200); Wire.begin(21, 22); Blynk.begin(BLYNK_AUTH_TOKEN, ssid, pass); dht.begin(); if (!display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS)) { while (true); } } void loop() { Blynk.run(); h = dht.readHumidity(); t = dht.readTemperature(); if (isnan(h) || isnan(t)) return; Blynk.virtualWrite(V14, t); Blynk.virtualWrite(V15, h); display.clearDisplay(); display.setTextColor(WHITE, BLACK); display.drawLine(64, 0, 64, 48, WHITE); display.drawLine(0, 15, 128, 15, WHITE); display.drawLine(0, 50, 128, 50, WHITE); display.setCursor(23, 0); display.setTextSize(1); display.println("TEM"); display.setCursor(89, 0); display.println("HUM"); display.setCursor(15, 25); display.print(t); display.setCursor(50, 25); display.println("*c"); display.setCursor(83, 25); display.print(h); display.setCursor(120, 25); display.println("%"); display.setCursor(0, 55); display.println("SET"); display.setCursor(64, 60); display.setTextSize(1); display.display(); delay(2000); } ]]> 2025-07-16 02:18:39 UTC https://padlet.com/ihereiheremak/v6xstblsnful9jx6/wish/3520698730 สอบ ตรง fill เอาไปเปลี่ยนสี มั่วเอาหรือไรก็ได้ ใครใช้เหลืองตามเป็นเก ihereiheremak https://padlet.com/ihereiheremak/v6xstblsnful9jx6/wish/3522201312 import processing.dxf.*;

import controlP5.*;

import processing.serial.*;

import cc.arduino.*;


ControlP5 cp5;

Arduino arduino;


int a = 2, b = 3, c = 4, d = 5, e = 6, f = 7, g = 8, dp = 9;

int count = 0;


boolean segA, segB, segC, segD, segE, segF, segG;


void setup() {

  size(300, 400);

  cp5 = new ControlP5(this);

  cp5.addButton("UP").setPosition(50, 300).setSize(80, 40);

  cp5.addButton("DOWN").setPosition(170, 300).setSize(80, 40);

  arduino = new Arduino(this, "COM8", 57600);

  int[] pins = {a, b, c, d, e, f, g, dp};

  for (int i = 0; i < pins.length; i++) {

    arduino.pinMode(pins[i], Arduino.OUTPUT);

    arduino.digitalWrite(pins[i], Arduino.HIGH);

  }

  showDigit(count);

}


void draw() {

  background(0);

  fill(255, 255, 0);

  noStroke();

  

  if (segA) rect(100, 30, 100, 10);

  if (segB) rect(200, 40, 10, 100);

  if (segC) rect(200, 150, 10, 100);

  if (segD) rect(100, 250, 100, 10);

  if (segE) rect(90, 150, 10, 100);

  if (segF) rect(90, 40, 10, 100);

  if (segG) rect(100, 140, 100, 10);

}


void controlEvent(ControlEvent theEvent) {

  String name = theEvent.getController().getName();

  if (name.equals("UP")) {

    count++;

    if (count > 9) count = 0;

    showDigit(count);

  } else if (name.equals("DOWN")) {

    count--;

    if (count < 0) count = 9;

    showDigit(count);

  }

}


void showDigit(int num) {

  switch (num) {

    case 0: showChar(true,true,true,true,true,true,false); break;

    case 1: showChar(false,true,true,false,false,false,false); break;

    case 2: showChar(true,true,false,true,true,false,true); break;

    case 3: showChar(true,true,true,true,false,false,true); break;

    case 4: showChar(false,true,true,false,false,true,true); break;

    case 5: showChar(true,false,true,true,false,true,true); break;

    case 6: showChar(true,false,true,true,true,true,true); break;

    case 7: showChar(true,true,true,false,false,false,false); break;

    case 8: showChar(true,true,true,true,true,true,true); break;

    case 9: showChar(true,true,true,true,false,true,true); break;

    default: showChar(false,false,false,false,false,false,false); break;

  }

}


void showChar(boolean aS, boolean bS, boolean cS, boolean dS, boolean eS, boolean fS, boolean gS) {

  arduino.digitalWrite(a, aS ? Arduino.LOW : Arduino.HIGH);

  arduino.digitalWrite(b, bS ? Arduino.LOW : Arduino.HIGH);

  arduino.digitalWrite(c, cS ? Arduino.LOW : Arduino.HIGH);

  arduino.digitalWrite(d, dS ? Arduino.LOW : Arduino.HIGH);

  arduino.digitalWrite(e, eS ? Arduino.LOW : Arduino.HIGH);

  arduino.digitalWrite(f, fS ? Arduino.LOW : Arduino.HIGH);

  arduino.digitalWrite(g, gS ? Arduino.LOW : Arduino.HIGH);

  arduino.digitalWrite(dp, Arduino.HIGH);


  segA = aS;

  segB = bS;

  segC = cS;

  segD = dS;

  segE = eS;

  segF = fS;

  segG = gS;

}

]]> 2025-07-17 08:20:58 UTC https://padlet.com/ihereiheremak/v6xstblsnful9jx6/wish/3522201312 สอบจารย์ต่อ namek3002 https://padlet.com/ihereiheremak/v6xstblsnful9jx6/wish/3528508362 import processing.serial.*;


Serial myPort;


Button btn1, btn2, btn3;


void setup() {

  size(400, 200);

  

  String portName = "COM4";

  myPort = new Serial(this, portName, 9600);

  

  btn1 = new Button(50, 100, 80, 40, "LED1", '1');

  btn2 = new Button(150, 100, 80, 40, "LED2", '2');

  btn3 = new Button(250, 100, 80, 40, "OFF", '0');

}


void draw() {

  background(220);

  

  textSize(20);

  text("ควบคุมไฟ LED", 120, 40);

  

  btn1.display();

  btn2.display();

  btn3.display();

}


void mousePressed() {

  if (btn1.isPressed(mouseX, mouseY)) {

    myPort.write(btn1.command);

  }

  if (btn2.isPressed(mouseX, mouseY)) {

    myPort.write(btn2.command);

  }

  if (btn3.isPressed(mouseX, mouseY)) {

    myPort.write(btn3.command);

  }

}


class Button {

  int x, y, w, h;

  String label;

  char command;

  

  Button(int x, int y, int w, int h, String label, char command) {

    this.x = x;

    this.y = y;

    this.w = w;

    this.h = h;

    this.label = label;

    this.command = command;

  }

  

  void display() {

    fill(180);

    rect(x, y, w, h);

    fill(0);

    textAlign(CENTER, CENTER);

    text(label, x + w/2, y + h/2);

  }

  

  boolean isPressed(int mx, int my) {

    return mx > x && mx < x + w && my > y && my < y + h;

  }

}


]]> 2025-07-25 07:55:33 UTC https://padlet.com/ihereiheremak/v6xstblsnful9jx6/wish/3528508362 งานกลุ่มปองกิจถังขยะ เวอร์ชั่น 1 https://padlet.com/ihereiheremak/v6xstblsnful9jx6/wish/3531623851 #define BLYNK_TEMPLATE_ID "TMPL6GywV4_bp" #define BLYNK_TEMPLATE_NAME "Anon 2" #define BLYNK_AUTH_TOKEN "lcQ-maobGNGm_gUbRbmvZC0g8XOVcQ0i" #include <WiFi.h> #include <BlynkSimpleEsp32.h> #include <Wire.h> #include <Adafruit_GFX.h> #include <Adafruit_SSD1306.h> #define TRIG 13 #define ECHO 12 #define LED_FULL 25 // ไฟระดับ 25% #define LED2 26 // ไฟระดับ 50% #define LED3 27 // ไฟระดับ 90% #define BUZZER_PIN 15 #define SCREEN_WIDTH 128 #define SCREEN_HEIGHT 64 Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, -1); #define TRASH_X 40 #define TRASH_Y 20 #define TRASH_W 48 #define TRASH_H 35 bool beep50Triggered = false; bool beep90Triggered = false; unsigned long previousMillis = 0; const long updateInterval = 200; // 🔧 ใส่ WiFi ของคุณตรงนี้ char ssid[] = "electronic24"; char pass[] = "1234567890"; void setup() { Serial.begin(9600); pinMode(TRIG, OUTPUT); pinMode(ECHO, INPUT); pinMode(LED_FULL, OUTPUT); pinMode(LED2, OUTPUT); pinMode(LED3, OUTPUT); pinMode(BUZZER_PIN, OUTPUT); WiFi.begin(ssid, pass); Blynk.begin(BLYNK_AUTH_TOKEN, ssid, pass); if (!display.begin(SSD1306_SWITCHCAPVCC, 0x3C)) { Serial.println(F("OLED failed")); while (1); } display.clearDisplay(); drawTrashCan(0); display.display(); } void loop() { Blynk.run(); // ทำให้ Blynk ทำงานเสมอ unsigned long currentMillis = millis(); if (currentMillis - previousMillis >= updateInterval) { previousMillis = currentMillis; // อ่านระยะจากเซนเซอร์ digitalWrite(TRIG, LOW); delayMicroseconds(2); digitalWrite(TRIG, HIGH); delayMicroseconds(10); digitalWrite(TRIG, LOW); long duration = pulseIn(ECHO, HIGH); float distance = duration * 0.034 / 2; float emptyDistance = 28.0; float fullDistance = 5.0; float level = constrain((emptyDistance - distance) / (emptyDistance - fullDistance), 0.0, 1.0); int percent = level * 100; // ส่งค่าไปยัง Blynk (Virtual Pin V0) Blynk.virtualWrite(V1, percent); Blynk.virtualWrite(V5, (percent >= 25) ? 255 : 0); // LED V2 = 25% Blynk.virtualWrite(V6, (percent >= 50) ? 255 : 0); // LED V3 = 50% Blynk.virtualWrite(V7, (percent >= 90) ? 255 : 0); // LED V4 = 90% // แจ้งเตือนระดับต่าง ๆ if (percent >= 90 && !beep90Triggered) { blinkAndSound(3, LED3); beep90Triggered = true; beep50Triggered = true; } else if (percent >= 50 && !beep50Triggered) { blinkAndSound(2, LED2); beep50Triggered = true; } // ไฟสถานะระดับ 25% digitalWrite(LED_FULL, (percent >= 25) ? HIGH : LOW); // ไฟติดค้างแบบ real-time digitalWrite(LED2, (percent >= 50) ? HIGH : LOW); digitalWrite(LED3, (percent >= 90) ? HIGH : LOW); // รีเซ็ตถ้าขยะต่ำกว่า 50% if (percent < 50) { beep50Triggered = false; beep90Triggered = false; } // แสดงผลใน Serial และ OLED Serial.print("Distance: "); Serial.print(distance); Serial.print(" cm | Trash Level: "); Serial.print(percent); Serial.println("%"); display.clearDisplay(); drawTrashCan(level); display.setCursor(0, 0); display.setTextSize(1); display.setTextColor(SSD1306_WHITE); display.print("Trash: "); display.print(percent); display.println("%"); display.display(); } } void blinkAndSound(int times, int ledPin) { for (int i = 0; i < times; i++) { digitalWrite(BUZZER_PIN, HIGH); digitalWrite(ledPin, HIGH); delay(100); digitalWrite(BUZZER_PIN, LOW); digitalWrite(ledPin, LOW); delay(150); } } void drawTrashCan(float fillLevel) { display.drawRoundRect(TRASH_X, TRASH_Y, TRASH_W, TRASH_H, 5, SSD1306_WHITE); display.fillRoundRect(TRASH_X - 6, TRASH_Y - 8, TRASH_W + 12, 10, 4, SSD1306_WHITE); display.fillRect(TRASH_X + 18, TRASH_Y - 14, 12, 6, SSD1306_WHITE); display.drawLine(TRASH_X + 12, TRASH_Y + 2, TRASH_X + 12, TRASH_Y + TRASH_H - 2, SSD1306_WHITE); display.drawLine(TRASH_X + 24, TRASH_Y + 2, TRASH_X + 24, TRASH_Y + TRASH_H - 2, SSD1306_WHITE); display.drawLine(TRASH_X + 36, TRASH_Y + 2, TRASH_X + 36, TRASH_Y + TRASH_H - 2, SSD1306_WHITE); int fillHeight = fillLevel * (TRASH_H - 2); int fillY = TRASH_Y + TRASH_H - 1 - fillHeight; display.fillRect(TRASH_X + 1, fillY, TRASH_W - 2, fillHeight, SSD1306_WHITE); } ]]> 2025-07-30 04:31:25 UTC https://padlet.com/ihereiheremak/v6xstblsnful9jx6/wish/3531623851 ขอcode arduino esp32 ส่งค่าระยะทางขอ Sensor ขึ้น Blynk https://padlet.com/ihereiheremak/v6xstblsnful9jx6/wish/3588926394 2025-09-17 03:08:12 UTC https://padlet.com/ihereiheremak/v6xstblsnful9jx6/wish/3588926394 https://l.facebook.com/l.php?u=https%3A%2F%2Fpadlet.com%2Fnamek3002%2Fpadlet-9gq6iydbyof4f44&h=AT3q2Yz0IpT7dKCAyobjiE0yPABerxgdD2dQF2VZEpaUkbquwSgbxRYnHuLo7sVnQf-5XDEvOpSdN16HesjxNFoKk2IuRPms0jKDRgAey5X-nOmITj0Eg8v65xvQtSmvkmsr https://padlet.com/ihereiheremak/v6xstblsnful9jx6/wish/3588965872 2025-09-17 03:28:53 UTC https://padlet.com/ihereiheremak/v6xstblsnful9jx6/wish/3588965872