https://padlet.com/MrMoran/Technology1 Describe how you made your belt balance. en-us 2016-09-23 07:35:23 UTC 2023-02-28 22:12:44 UTC hello@padlet.com MrMoran https://padlet.com/MrMoran/Technology1/wish/125946288 Key Words

1. Tenon saw
2. Bench hook 
3. Tri-Square
4. Belt Sander
5. Bench Vice
6. Safety

]]> 2016-09-23 09:12:37 UTC https://padlet.com/MrMoran/Technology1/wish/125946288 https://padlet.com/MrMoran/Technology1/wish/126031287 2016-09-23 14:39:27 UTC https://padlet.com/MrMoran/Technology1/wish/126031287 https://padlet.com/MrMoran/Technology1/wish/126117742 Today in class we made a belt balance. We used a tri-square to measure the lines we had to cut.We used timber wood blocks as our belt balance material.Some of the wood blocks were to big and we needed to cut a bit off.We used a bench hook to do this .To cut the block you needed a tenson saw and a bench vice to hold the block in place .You had to do three back saws to make a trench so that your saw doesn't move around and is in one place.The block is rough you use a bench sander to smoothen out your belt balance .Safety was important so we don't cut off a finger or two all the class followed the safety guidelines. I had a lot of funny cutting and trying to do my best.

]]> 2016-09-23 19:08:08 UTC https://padlet.com/MrMoran/Technology1/wish/126117742 https://padlet.com/MrMoran/Technology1/wish/127639996 over the last couple of        days , we have made belt blances that balance a belt on your finger . The tools we used  were tenon saw,bench hook,tri-square,belt sander,bench vice. We first put aprons on and mr moran explained to us what we would be doing. Mr.moran cut out a square piece of wood for us .we used the tri-square to measure the  angles and the degress of the wood and drew it out on the wood with a pencil . Than mr. moran gave us partners  i was with nathan;-);-) he went first to show me how you did it . I put my piece of wood in between the bench vice and i used the tenon saw (nathan helped me )to cut the piece of wood to make it the right shape and than i used the chisel to curve the edges. i than put safety googles on and rachel showed me how to use the belt sander and i straightened it out than we used the sander to straighten it out . MINE ACTUALLY WORKED:);)^_^after alot of sanding it down]]> 2016-09-30 19:51:50 UTC https://padlet.com/MrMoran/Technology1/wish/127639996