Be sure to include in your post:

1. What are the materials used.

2. Why the material is used.

3. How your design works.

You may consider using the structure below for your feedback.

I like this idea because.... (reason)...

I disagree with this idea because.... (reason)...

One area for improvement is... (suggestion)...

Can you please clarify this part about...

You may refer to the poster above for more examples of feedback and structure that you can provide.

1x potted plant

1x potted plant

1) Soil

2) Plastic bottle

3) pot

4) any plant

(Should be under $10)

1x bottle with water

1x straw

toothpick, big plastic bottle and a long cotton string

1x small bottle

1x straw

1x big container

1x stand

1x potted plant

1x plastic bottle with water

1x straw

1x big container

.straw

. Bottle of water

Few areas for improvement is:

-you need to show the hole that lets the bottle drip

-you should specify how the bigger bottle affects the plant instead of just 2 small bottles

• I disagree with this idea because the plant might not get enough water.

• One area for improvement is adding more cotton swabs and using a bigger bottle to store more water.

I disagree with this idea because ur plant may die from receiving too much water at one time.

One area for improvement is that You can make a system that make it for the water to stop watering at one point of time :)

*one area for improving is to make it more efficient

Disagree also as water vapour moves randomly through the air after the water is evaporated so not 100 percent will go onto the thing at the top and if you put a cardboard box photosythesis will not happen.

So add a glass box over it for photosythesis

One area for improvement is to put just one bottle.

One area for improvement is making the bottle a bit bigger so it could last longer.

One thing for improvement is that you can put something because the water will flow out easily.

One improvement is to make your explanation more clear

- One area for improvement is adding a cap and making a small hole so that it can take in water and without the soil coming out.

-One area for improvement is that you could design a way to stop the water from evaporating.

- One area for improvement is putting cotton swabs so that the water will be absorbed into the soil better.

• One reason I disagree with this idea is that the cotton swab might not absorb enough water for the plant to survive depending on the size of the plant.

• One thing your group can improve on is that you can add more cotton swabs to increase the amount of water used to water the plant. You can also remove the hole to decrease the exposed surface area so the water will not evaporate as fast.

One area for improvement is to show the design more clearly.

-One area from improvement is you can poke holes in the bottle cap so the water flows onto the soil more easily.

One area of improvement is to connect the shelter-like thing directly to the edge of the bottle to make sure that no water vapour escapes.

One area of improvement is putting the plastic bottle in the soil.

One area for improvement is to make a bigger bottle and also put a cap at the water bottle and poke the straw through

-One area for improvement is that you can make the bottle smaller so the roots can reach the water.

One area for improvement is to make a hole so the roots can absorb water.

One area fir improvement

-you can put a hole so water can flow thorugh easily

Instead of using a bottle, use a large bowl and instead of using a box to cover it and preventing it from evaporation, use oil to layer the water.

G2 Yi Le G6 Nathan

G3 Thaddeus G7 Yingxiu

G4 Cassius G8 Nafis

G3 Kyler

G4 Jing Wen (not in pic)

G5 Mirza

G6 Yu Jie

G7 Sudaksh

G8 Oliver (not in pic)

G3 Kyler (not in pic)

G4 Jing Wen

G5 Mirza

G6 Yu Jie

G7 Sudaksh

G8 Oliver (not in pic)