https://padlet.com/efoxbed17/SESEpulleysystem By Aindriú Horan, Emma Fox, Jamie Reilly and Rebecca Mac Arthur en-us 2018-11-26 17:54:02 UTC 2024-12-02 23:14:17 UTC hello@padlet.com efoxbed17 https://padlet.com/efoxbed17/SESEpulleysystem/wish/307943587 For our group project, we set off to make a lifting device using a pulley system. It was a group decision to choose this task as we found the idea interesting and knew that we could carry out the process in many different ways.]]> 2018-11-26 18:25:52 UTC https://padlet.com/efoxbed17/SESEpulleysystem/wish/307943587 efoxbed17 https://padlet.com/efoxbed17/SESEpulleysystem/wish/307947299 Strand: Materials 
Strand unit: Properties and characteristics of materials ]]> 2018-11-26 18:31:47 UTC https://padlet.com/efoxbed17/SESEpulleysystem/wish/307947299 efoxbed17 https://padlet.com/efoxbed17/SESEpulleysystem/wish/307956659 The children will be enabled to.... 
- Design and make their own lifting device involving one of their toys.
- Decide on the best and most efficient design and justify their decision.
- Research materials they may need and pick the ones which are most suited to their creation.
- Create their device]]> 2018-11-26 18:46:05 UTC https://padlet.com/efoxbed17/SESEpulleysystem/wish/307956659 efoxbed17 https://padlet.com/efoxbed17/SESEpulleysystem/wish/308473674 To gather the children's PRK, we would ask questions similar to the following:
- Can anyone give an example of a lifting device?
- Does anyone know what a pulley is?
- If you were to make a lifting device, what materials would you need?
- How would you decide what materials are most suitable?
- What characteristics would they need to have?]]> 2018-11-27 19:05:44 UTC https://padlet.com/efoxbed17/SESEpulleysystem/wish/308473674 efoxbed17 https://padlet.com/efoxbed17/SESEpulleysystem/wish/308480560 1. What type of lifting device would suit our chosen toy?
2. How will our lifting device be operated? By pulleys or gears? 
3. What materials will we need to build our lifting device]]> 2018-11-27 19:15:42 UTC https://padlet.com/efoxbed17/SESEpulleysystem/wish/308480560 efoxbed17 https://padlet.com/efoxbed17/SESEpulleysystem/wish/308482448 After we chose what we wanted to make, we brainstormed  on different things we could make. Some ideas we came up with were:
- A pyramid half built. Our lifting device would finish building the pyramid.
- A watering well- the lifting device would be carrying the bucket up and down the well.

The final idea is the idea we decided to do. We thought about any children's toys that contain lifting devices. We established the idea of building an elevator for a toy car, like toy car parks would have. The lifting device part of it would be how we get elevator to rise and fall. We used a pulley system for this.]]> 2018-11-27 19:18:35 UTC https://padlet.com/efoxbed17/SESEpulleysystem/wish/308482448 efoxbed17 https://padlet.com/efoxbed17/SESEpulleysystem/wish/308482964 There were two stages in making our lifting device. The first stage was making the frame. We started by cutting strips of timber to the following measurements.
Four 360mm Lengths
Four 100mm Lengths
One 85mm Lengths
Two 127mm Lengths
One 130mm X 130mm plywood(This later had to be changed to 150mm X 150mm as the 130mm by 130mm was too small for the roof of the frame.)
 

Firstly we started by getting two 100mm Lengths and put them down on the table horizontally. We then got two 360mm Lengths and placed them sideways onto the 100mm Lengths to make an even rectangle. We then got a nail gun and nailed the timber together so that the timber wouldn't fall apart. We repeated this process with the remaining two 360mm Lengths and two 100mm Lengths and made another rectangle. We then got the two 127mm pieces of timber and we placed them horizontally apart. We then put both rectangle pieces of timber onto the two pieces of 127mm timber ensuring that each rectangular piece touched both 127mm pieces of timber and that the base of the frame formed a rectangular shape. We then nailed the pieces of timber so that the frames could stand up on its own. We then got the 185mm piece of timber and went to the back of the frame and nailed it to the  upper back wall of the frame. We then got the plywood and placed it on top of the frame and nailed it to the frame. This was the first stage of making the lift and with the frame now finished we could move onto the pulley's. ]]> 2018-11-27 19:19:18 UTC https://padlet.com/efoxbed17/SESEpulleysystem/wish/308482964 efoxbed17 https://padlet.com/efoxbed17/SESEpulleysystem/wish/308483100 Our designing element consisted of drawing different ways that we could attach the pulleys to the frame. We had a few designs but the below design is the one we used.]]> 2018-11-27 19:19:29 UTC https://padlet.com/efoxbed17/SESEpulleysystem/wish/308483100 efoxbed17 https://padlet.com/efoxbed17/SESEpulleysystem/wish/308483209 We tested the lifting device using the pulleys to see how it worked. 
Here's a video of the lifting device in action lifting a toy car. 

]]> 2018-11-27 19:19:38 UTC https://padlet.com/efoxbed17/SESEpulleysystem/wish/308483209 rmacarthurbed17 https://padlet.com/efoxbed17/SESEpulleysystem/wish/311395358 Things that went well for us:
1. The lifting device works
2. The making and design  elements were a success
3. The Padlet was an effective way of documenting the process.

]]> 2018-12-05 15:12:31 UTC https://padlet.com/efoxbed17/SESEpulleysystem/wish/311395358 efoxbed17 https://padlet.com/efoxbed17/SESEpulleysystem/wish/311609780 We cut out the cardboard to the dimensions of the structure. We went with a 100mm X 96mm square base. The lift has three closed sides with one open end at the front. The sides were glued down with double flaps to give the structure more strength and durability. 
A strip of cardboard goes across the centre of the lift and is stuck down with glue to both sides. This will be attached to the pulley system and is essential for lifting the lift structure up and down. ]]> 2018-12-05 21:30:13 UTC https://padlet.com/efoxbed17/SESEpulleysystem/wish/311609780 efoxbed17 https://padlet.com/efoxbed17/SESEpulleysystem/wish/311610774 2018-12-05 21:33:56 UTC https://padlet.com/efoxbed17/SESEpulleysystem/wish/311610774 efoxbed17 https://padlet.com/efoxbed17/SESEpulleysystem/wish/311612838 2018-12-05 21:41:28 UTC https://padlet.com/efoxbed17/SESEpulleysystem/wish/311612838 efoxbed17 https://padlet.com/efoxbed17/SESEpulleysystem/wish/311613177 2018-12-05 21:42:54 UTC https://padlet.com/efoxbed17/SESEpulleysystem/wish/311613177 efoxbed17 https://padlet.com/efoxbed17/SESEpulleysystem/wish/311613386 2018-12-05 21:43:49 UTC https://padlet.com/efoxbed17/SESEpulleysystem/wish/311613386 efoxbed17 https://padlet.com/efoxbed17/SESEpulleysystem/wish/311613747 The lift which is raised up and down by the pulley system is just made from cardboard. One of the members of our team brought in cardboard from her workplace and we made the lift from this. We had to find cardboard that would be strong enough to be pulled up and down by the pulley but also light enough to be lifted up and down with an object in it. We decided to use cardboard because we thought it would be better than wood or plywood as it is lighter. ]]> 2018-12-05 21:44:59 UTC https://padlet.com/efoxbed17/SESEpulleysystem/wish/311613747 efoxbed17 https://padlet.com/efoxbed17/SESEpulleysystem/wish/311613919 In conclusion, we designed a lifting device using a pulley system. It was a long process, but as a group we are happy with the finished product. The process involved exploring, making, designing and evaluating. We explored what different devices we could make, we made our chosen idea, we drew some designs on how to attach the pulleys. Finally, we evaluated our progress by writing about what went well and what did not go well throughout the process.

Our final device is one that we are happy to have made.]]> 2018-12-05 21:45:33 UTC https://padlet.com/efoxbed17/SESEpulleysystem/wish/311613919 efoxbed17 https://padlet.com/efoxbed17/SESEpulleysystem/wish/311784781 2018-12-06 13:36:39 UTC https://padlet.com/efoxbed17/SESEpulleysystem/wish/311784781 efoxbed17 https://padlet.com/efoxbed17/SESEpulleysystem/wish/311785387 2018-12-06 13:37:53 UTC https://padlet.com/efoxbed17/SESEpulleysystem/wish/311785387 efoxbed17 https://padlet.com/efoxbed17/SESEpulleysystem/wish/311786191 2018-12-06 13:39:28 UTC https://padlet.com/efoxbed17/SESEpulleysystem/wish/311786191 jreillybed17 https://padlet.com/efoxbed17/SESEpulleysystem/wish/311794966 Things that didn't go as well for us:
1. The measurements for the roof of the frame had to be altered as they did not fit the frame properly.
2. Lack of communication during placement led to an increase in confusion. We were put under pressure to complete the assignment as a result. ]]> 2018-12-06 13:56:24 UTC https://padlet.com/efoxbed17/SESEpulleysystem/wish/311794966 efoxbed17 https://padlet.com/efoxbed17/SESEpulleysystem/wish/312005597 2018-12-06 19:37:08 UTC https://padlet.com/efoxbed17/SESEpulleysystem/wish/312005597 efoxbed17 https://padlet.com/efoxbed17/SESEpulleysystem/wish/312006114 2018-12-06 19:38:02 UTC https://padlet.com/efoxbed17/SESEpulleysystem/wish/312006114