2019 1 Joy Group B by kcpsswallwisher2

2019 1 Joy Group B by kcpsswallwisher2 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019 This is the wall for Sec 1 Joy Group B students to share their isometric sketching of their display unit and gather the feedback/critiques from the teacher/peers. en-us 2019-03-08 07:51:44 UTC 2026-01-11 22:53:36 UTC hello@padlet.com Student A's sketch kcpsscrafttech2 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/339201506 2019-03-08 07:53:54 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/339201506 Student B's Critique kcpsscrafttech2 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/339577748 a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: ______________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: ______________________________
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: ______________________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________

c) Proportion
Are the base and the backing in proportion ?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: ______________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________]]> 2019-03-09 16:53:04 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/339577748 Student A's Name kcpsscrafttech2 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347457201 2019-04-02 03:16:03 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347457201 Student B's Name kcpsscrafttech2 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347458068 a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: _No________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: _The backing is slightly out of shape as the top of the shape is too narrow.___________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: _No___________________________
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: _No___________________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: _The vertical edge of the backing is not vertical, which makes the backing appears that it is falling backwards. Besides, the left horizontal edges are more that 30^o and the right horizontal edges are less than 30^o ._________________

c) Proportion
Are the base and the backing in proportion ?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: _No__________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: _The width of the base is too long with respect to its length and height. The thickness of the material is all way too thick. There is also no thickness for the backing.__________________________

]]> 2019-04-02 03:22:40 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347458068 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347461143 2019-04-02 03:46:03 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347461143 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347461285 2019-04-02 03:46:59 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347461285 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347461294 2019-04-02 03:47:05 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347461294 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347461840 2019-04-02 03:50:33 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347461840 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347462190 2019-04-02 03:53:02 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347462190 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347462486 2019-04-02 03:55:11 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347462486 Jedidiah https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347462489

a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans:yes
If your answer to the above is 'no', explain which part can be improved.
Ans:

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: not really
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: not really
If any of your answers to the above is 'no', explain which part can be improved.
Ans: c) Proportion

Are the base and the backing in proportion?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: yes
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

]]> 2019-04-02 03:55:11 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347462489 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347462532 2019-04-02 03:55:27 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347462532 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347462546 2019-04-02 03:55:33 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347462546 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347462657 2019-04-02 03:56:20 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347462657 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347462666 2019-04-02 03:56:23 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347462666 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347462688 2019-04-02 03:56:37 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347462688 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347462804 2019-04-02 03:57:20 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347462804 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347462828 2019-04-02 03:57:34 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347462828 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347462845 2019-04-02 03:57:41 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347462845 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347462875 2019-04-02 03:57:54 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347462875 Siqi a) Resemblance Comparing the 2D shape with the isometric sketching, do they resemble?Ans: Yes. (If your answer to the above is 'no', explain which part can be improved.)Ans: _______________________________________________________________________________________________________________________________________ b) Isometric lines. Are the vertical edges of the display unit drawn as vertical lines?Ans: Yes. Are the horizontal edges of the display unit drawn as 30 ° lines?Ans: Yes. (If any of your answers to the above is 'no', explain which part can be improved.)Ans: _______________________________________________________________________________________________________________________________________c) ProportionAre the base and the backing in proportion ? Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.Ans: slightly of.(If your answer to the above is 'no', explain which part can be improved).Ans: The height of the base is good but the breadth and length of base is too similar, length is abit too short . https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347462891 2019-04-02 03:57:59 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347462891 Zexian https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347462922 a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: Yes
If your answer to the above is 'no', explain which part can be improved.
Ans: NIL

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: His lines are a little slanted and crooked.

Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: No, the lines are a little over 30 degrees.
If any of your answers to the above is 'no', explain which part can be improved.
Ans: He can straighten the lines a little and minimise the space between horizontal edges of the display, making the degree smaller.

c) Proportion
Are the base and the backing in proportion ?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: No

If your answer to the above is 'no', explain which part can be improved.
Ans: Though the length is a little over 150, the breadth and height is perfect. He can just shorten his length a little and the proportion would be perfect. His figure doesn't have a backing. He can add a backing to his figure. He also has an extra line between the two heights at the front, he should remove the line. ]]> 2019-04-02 03:58:07 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347462922 Marilynn https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347463031 a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: yes, it looks rather similar

If your answer to the above is 'no', explain which part can be improved.
Ans: my answer above is yes

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: yes :)
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: yes they are. i cannot be fully sure as i do not have a protractor

If any of your answers to the above is 'no', explain which part can be improved.
Ans: Everything is good SO FAR :)

c) Proportion
Are the base and the backing in proportion ?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: The backing is good too :)
If your answer to the above is 'no', explain which part can be improved.
Ans: all's good all's good :)

Have a nice day :)

:) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) :) ]]> 2019-04-02 03:58:53 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347463031 noah https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347463043 a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: Yes
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: _____Yes______________________
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: _________Yes__________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________

c) Proportion
Are the base and the backing in proportion ?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: ____________Yes_______________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________ ]]> 2019-04-02 03:58:58 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347463043 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347463052 a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: Yes
If your answer to the above is 'no', explain which part can be improved.
Ans:

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: Yes
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans:
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ______________________________

c) Proportion
Are the base and the backing in proportion ?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: No
If your answer to the above is 'no', explain which part can be improved.
Ans: The backing is a bit too tall

]]> 2019-04-02 03:59:02 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347463052 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347463188 2019-04-02 04:00:00 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347463188 Commentor: eVzeN https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347463291

a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: _Okay okay around there________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ____________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: ____Yes_______________________
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: _No___________________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: _The left horizontal edges are more that 30^o and the right horizontal edges are less than 30^o ._________________

c) Proportion
Are the base and the backing in proportion ?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: _Yes__________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: _I never__________________________

]]> 2019-04-02 04:00:52 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347463291 Mrs Tan's comment kcpsscrafttech2 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347463365 Hi Noah, there is no thickness for your backing. And the base does not seems to be able to see through from the bottom.]]> 2019-04-02 04:01:31 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347463365 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347463584 2019-04-02 04:03:09 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347463584 Si Jia a) Resemblance Comparing the 2D shape with the isometric sketching, do they resemble? Ans: Yes If your answer to the above is 'no', explain which part can be improved. Ans: b) Isometric lines Are the vertical edges of the display unit drawn as vertical lines? Ans: No Are the horizontal edges of the display unit drawn as 30 ° lines? Ans: No If any of your answers to the above is 'no', explain which part can be improved. Ans: Some of your lines can be straighter, as some are slanted. c) Proportion Are the base and the backing in proportion ? Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100. Ans: No If your answer to the above is 'no', explain which part can be improved. Ans: Your backing is smaller than the base. You can increase the size of the backing. https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347463622 2019-04-02 04:03:21 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347463622 Jiasheng https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347463712 a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: Yes
If your answer to the above is 'no', explain which part can be improved.
Ans: N.A
b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: Yes
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: No
If any of your answers to the above is 'no', explain which part can be improved.
Ans: Try to move the left line downwards by a bit.

c) Proportion
Are the base and the backing in proportion ?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: Yes
If your answer to the above is 'no', explain which part can be improved.
Ans: N.A ]]> 2019-04-02 04:03:57 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347463712 Jermaine https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347463721

a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans:Yes they look similar.
If your answer to the above is 'no', explain which part can be improved.
Ans: my answer above is yes

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: Yes but the lines are a bit crooked.
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: Yes.
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________

c) Proportion
Are the base and the backing in proportion ?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: The proportion is correct.
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________

]]> 2019-04-02 04:04:00 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347463721 Mrs Tan's comment kcpsscrafttech2 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347463901 Hi Shameer, the resemblance is great. But certain part of the thickness for the backing is missing.]]> 2019-04-02 04:05:13 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347463901 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347463922 2019-04-02 04:05:22 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347463922 a) ResemblanceComparing the 2D shape with the isometric sketching, do they resemble?Ans:yes they do If your answer to the above is 'no', explain which part can be improved.Ans: _______________________________________________________________________________________________________________________________________b) Isometric linesAre the vertical edges of the display unit drawn as vertical lines?Ans:no Are the horizontal edges of the display unit drawn as 30 ° lines?Ans: yes______________________If any of your answers to the above is 'no', explain which part can be improved.Ans: the stand can be more prportionate______________________________________________________________________________________________________________________________c) ProportionAre the base and the backing in proportion ? Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.Ans: ye_________________________If your answer to the above is 'no', explain which part can be improved.Ans: _______________________________________________________________________________________________________________________________________ https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347463996

]]> 2019-04-02 04:05:53 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347463996 Ian https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347464140 a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: yes
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: _________________kind of drawn well____________
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: __________yes___________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________

c) Proportion
Are the base and the backing in proportion ?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: ________yes______________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________ ]]> 2019-04-02 04:06:45 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347464140 Mrs Tan's comment kcpsscrafttech2 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347464230 Hi Jiasheng, your isometric sketching is good! But you can improve on the height of the backing. Yours is a bit too tall.]]> 2019-04-02 04:07:26 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347464230 Shin https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347464520 a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: They look quite similar, its just a little different.
If your answer to the above is 'no', explain which part can be improved.
Ans: My answer above is yes.

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: Yes but the lines are a bit slanted and messy.
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: No.
If any of your answers to the above is 'no', explain which part can be improved.
Ans: The lines could be straighter and neater.

c) Proportion
Are the base and the backing in proportion ?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: No.
If your answer to the above is 'no', explain which part can be improved.
Ans: There is no thickness for backing so he should draw the backing.

]]> 2019-04-02 04:09:09 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347464520 Mrs Tan's comment kcpsscrafttech2 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347464644 Hi Cyrus, your proportion is good! But certain part of the thickness of the backing is missing.]]> 2019-04-02 04:10:02 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347464644 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347465187 2019-04-02 04:13:39 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347465187 Mrs Tan's comment kcpsscrafttech2 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347465246 Hi Joshua, is that you behind the the sketching? Haha! Your backing is a mirror reflection of your 2D shape! And the base does not seems to be able to see through from the bottom. The base is also not proportion. The left side of the base is shorter than the right side.]]> 2019-04-02 04:13:52 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347465246 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347465784

Aashka's Critique

a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: Yes
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: Yes
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: No
If any of your answers to the above is 'no', explain which part can be improved.
Ans: The base should be tilted a bit upwards as it is tilted a bit too low.

c) Proportion
Are the base and the backing in proportion ?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: No
If your answer to the above is 'no', explain which part can be improved.
Ans: I think the length should be a little bit longer.

]]> 2019-04-02 04:17:42 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347465784 Mrs Tan's comment kcpsscrafttech2 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347466035 Hi Jonah, nice picture with your face on it! Haha! There are some room of improvement for your sketching. The base of your display unit does not seems to be able to see through from the bottom. The base is also not proportion. The left side of the base is shorter than the right side. The vertical edge of your backing is not vertical which makes the backing seems falling backward.]]> 2019-04-02 04:19:23 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347466035 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347466084 2019-04-02 04:19:46 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347466084 CYRUS(LIMLILL) https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347466365 a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: _________YES_____________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: ________________YES______________
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: _____________________________YES_
If any of your answers to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________

c) Proportion
Are the base and the backing in proportion ?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: _______________________YES_______
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________ ]]> 2019-04-02 04:21:44 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347466365 Richelle https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347466404 a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: Yes
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________
_________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans:The lines are a slightly slanted.
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: No. The right line is below 30 degrees while the left line is over 30 degrees.
If any of your answers to the above is 'no', explain which part can be improved.
Ans: He can try to draw both lines at 30 degrees.

c) Proportion
Are the base and the backing in proportion ?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: No
If your answer to the above is 'no', explain which part can be improved.
Ans: The height of the base is not 25. He can decrease the height. ]]> 2019-04-02 04:22:04 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347466404 a) Resemblance Comparing the 2D shape with the isometric sketching, do they resemble? Ans: Yes there is a lot of resemblance between the 2D and 3D sketches. If your answer to the above is 'no', explain which part can be improved. Ans: _______________________________________________________________________________________________________________________________________b) Isometric linesAre the vertical edges of the display unit drawn as vertical lines?Ans: Yes they are. Are the horizontal edges of the display unit drawn as 30 ° lines?Ans: Only one of them are. the shorter line angle looks different than the longer one. If any of your answers to the above is 'no', explain which part can be improved.Ans: _______________________________________________________________________________________________________________________________________c) ProportionAre the base and the backing in proportion ? Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100. If your answer to the above is 'no', explain which part can be improved.Ans: https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347466785 No the dimensions are fine and are in proportion.]]> 2019-04-02 04:25:10 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347466785 Mrs Tan's comment kcpsscrafttech2 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347467097 Hi Marilynn, your isometric sketching of the backing is well-done. But the base is a bit too long. The left side of the base is slightly longer than the right side. ]]> 2019-04-02 04:27:06 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347467097 JONAH https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347467524

a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: _Okay aroundthere________________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ____________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: ____Yes_______________________
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: _No___________________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: _The left horizontal edges are more that 30^o and the right horizontal edges are less than 30^o ._________________

more_vert

📎 Photo

]]> 2019-04-02 04:29:53 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347467524 Mrs Tan's comment kcpsscrafttech2 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347467847 Hi Si Jia, certain part of the thickness for the backing is missing. With reference to its length and width, the height of the base is a bit too short. Overall, your sketching is very neat!]]> 2019-04-02 04:32:01 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347467847 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347468379 2019-04-02 04:35:45 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/347468379 Mrs Tan's comment kcpsscrafttech2 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/348769635 Hi Shin, in general your isometric sketching of the display unit is well- done, but you can improve on the proportion, particularly the base, as the left side of the base is shorter than the right side.]]> 2019-04-05 01:27:56 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/348769635 Mrs Tan's comment kcpsscrafttech2 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/348771309 Hi Si Qi, the base of your display unit does not seem to be able to see through from the bottom. The backing is also not proportion, it is too tall. There is also no thickness of material for the backing.]]> 2019-04-05 01:31:26 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/348771309 Mrs Tan's comment kcpsscrafttech2 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/348774898 Hi Jermaine, certain part of the thickness for the backing is missing. The base of your display unit does not seems to be able to see through from the bottom. Generally, your sketching is well-done!]]> 2019-04-05 01:43:20 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/348774898 Mrs Tan's comment kcpsscrafttech2 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/349133484 Hi Aashka, the shape for your backing is quite complex, yet you have done a good job in drawing it in isometric sketching. Good job. You have improve your sketching further by drawing the lines for the crate in lighter tone, so that the actual lines of the display unit can stand out.]]> 2019-04-06 09:02:32 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/349133484 Mrs Tan's comment kcpsscrafttech2 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/349133837 Hi Richelle, the height of your backing is not 4 parts of the height of the base, as such, the backing looks a bit short. In general, your drawing is very neat!]]> 2019-04-06 09:08:38 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/349133837 Mrs Tan's comment kcpsscrafttech2 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/349134165 Hi Shiya, the thickness of your base is slightly too thick. The front of the base is longer than its back, as such it does not look proportional. This also leads to the backing looks taller, as the length of the backing is not 6 parts of the height of the base.]]> 2019-04-06 09:14:06 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/349134165 Mrs Tan's comment kcpsscrafttech2 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/349219632 Hi Zexian, certain part of the thickness for the backing is missing. The height of the base looks inappropriate at the bottom. Overall, your sketching is neat and well-done!]]> 2019-04-07 06:53:52 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/349219632 Mrs Tan's comment kcpsscrafttech2 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/349219795 Hi Ian, your sketching would look better, if you draw it bigger. Certain part of the thickness for the backing is missing. The base of your display unit does not seems to be able to see through from the bottom. The left side of the base is shorter than the right side.]]> 2019-04-07 06:56:35 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/349219795 Mrs Tan's comment kcpsscrafttech2 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/349219935 Hi Evzen, you look great in the picture. Haha! But your sketching has some room for improvement. The thickness of the backing is inappropriate. The length of both the backing and base is much than 6 parts of the height of the base, as such the display unit looks way too long.]]> 2019-04-07 07:00:11 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/349219935 Mrs Tan's comment kcpsscrafttech2 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/349220178 Hi Gabriel, there is no thickness in the backing of your sketching. The base of your display unit does not seems to be able to see through from the bottom. The width of the base is less than 4 parts of its height and the thickness of the base is also uneven. ]]> 2019-04-07 07:04:54 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/349220178 Mrs Tan's comment kcpsscrafttech2 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/349220410 Hi Ian, the base is very well-drawn! However, you have missed out the thickness of the material for the backing. Very neat drawing!]]> 2019-04-07 07:09:05 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/349220410 Mrs Tan's comment kcpsscrafttech2 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/349220569 Hi Jedidiah, the thickness of your backing is inappropriate. The height of the base is uneven, you need to improve on keeping the parallel lines parallel. The left side of the backing is taller than its right side. The length of the base is not 6 parts of its height, and its width is not 4 parts of its height too. ]]> 2019-04-07 07:13:19 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/349220569 Student A's second sketch kcpsscrafttech2 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351855136 2019-04-16 02:16:27 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351855136 Shiya https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351864580 a) Resemblance
Comparing the 2D shape with the isometric sketching, do they resemble?
Ans: I think
If your answer to the above is 'no', explain which part can be improved.
Ans:NIL______________________________________________________________________________________________________________________________________________________________________________________________________

b) Isometric lines
Are the vertical edges of the display unit drawn as vertical lines?
Ans: _i think so____________________
Are the horizontal edges of the display unit drawn as 30 ° lines?
Ans: Yes___________________
If any of your answers to the above is 'no', explain which part can be improved.
Ans: NIL______________________________________________________________________________________________________________________________________________________________________________________________________

c) Proportion
Are the base and the backing in proportion?
Note: The LxBxH of the base is 150x100x25 and the LxB of the shape of backing is 150x100.
Ans: _yes____________________
If your answer to the above is 'no', explain which part can be improved.
Ans: ______________________________________________________________________________________________________________________________________________________________________________________________________

]]> 2019-04-16 03:26:23 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351864580 Jiasheng's second sketch https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351865789 2019-04-16 03:35:37 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351865789 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351867260 my 2nd sketch]]> 2019-04-16 03:46:38 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351867260 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351868239 2019-04-16 03:53:06 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351868239 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351868250 2019-04-16 03:53:09 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351868250 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351868254 Si Jia's second sketch

]]> 2019-04-16 03:53:10 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351868254 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351868426 2019-04-16 03:54:16 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351868426 Second sketch https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351868526 2019-04-16 03:54:44 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351868526 Sketch 2 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351868681 2019-04-16 03:55:29 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351868681 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351868811 Second Sketch]]> 2019-04-16 03:56:16 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351868811 Jermaine's 2nd post https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351869354 2019-04-16 04:00:07 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351869354 Sketch https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351869432 2019-04-16 04:00:37 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351869432 Gabriel second sketch https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351869715 2019-04-16 04:02:46 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351869715 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351869987 2019-04-16 04:04:31 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351869987 Noah second drawing https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351870310 2019-04-16 04:07:20 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351870310 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351870413 2019-04-16 04:08:19 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351870413 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351870674 2019-04-16 04:10:20 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351870674 h https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351870702
\]]> 2019-04-16 04:10:35 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351870702 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351871202 2019-04-16 04:14:58 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351871202 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351874175 2019-04-16 04:37:33 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/351874175 Student A's Second Sketch kcpsscrafttech2 https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/357025554 2019-05-06 02:22:39 UTC https://padlet.com/kcpsscrafttech2/1JoyGroupB2019/wish/357025554