https://padlet.com/oconnorkick/rn6ec57qocug Please do not post anything but lesson related pictures and comments. If you are off task it will be reflected in your grade. en-us 2016-09-26 15:29:22 UTC 2025-11-29 20:29:58 UTC hello@padlet.com oconnorkick https://padlet.com/oconnorkick/rn6ec57qocug/wish/126638007 once you upload take a look at your classmates attempts.]]> 2016-09-27 13:01:24 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126638007 s949448 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126641147 2016-09-27 13:07:53 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126641147 s10190581 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126641529 This is my final attempt. it is my best attempt. This is bad picture.]]> 2016-09-27 13:08:41 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126641529 s924488 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126641613 2016-09-27 13:08:51 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126641613 s842430 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126641857 2016-09-27 13:09:21 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126641857 s1013121 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126642005 My best attempt 😃😝😋]]> 2016-09-27 13:09:42 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126642005 s967897 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126642763 2016-09-27 13:11:31 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126642763 s910654 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126642814 it had an ear on it]]> 2016-09-27 13:11:38 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126642814 s913625 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126643365 2016-09-27 13:12:54 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126643365 s892840 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126643469 2016-09-27 13:13:07 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126643469 s905910 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126793875 2016-09-27 19:11:15 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126793875 s906164 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126794794 2016-09-27 19:14:28 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126794794 s1013650 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126795031 My masterpiece!]]> 2016-09-27 19:15:22 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126795031 s905165 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126795080 2016-09-27 19:15:33 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126795080 s9074661 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126795336 Final attempt]]> 2016-09-27 19:16:41 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126795336 s905439 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126795382 2016-09-27 19:16:49 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126795382 s906164 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126795527 2016-09-27 19:17:19 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126795527 s905439 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126795624 2016-09-27 19:17:40 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126795624 s1000405 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126795642 Much better then the first one.😂]]> 2016-09-27 19:17:46 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126795642 s913437_student https://padlet.com/oconnorkick/rn6ec57qocug/wish/126795855 2016-09-27 19:18:34 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126795855 s967915 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126795883 Jonathon's]]> 2016-09-27 19:18:40 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126795883 s918812 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126796436 2016-09-27 19:20:48 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126796436 s1018370 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126796550 2016-09-27 19:21:19 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126796550 s918812 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126796563 attempt 2

]]> 2016-09-27 19:21:22 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126796563 s906164 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126798383 2016-09-27 19:27:29 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126798383 s906164 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126798468 2016-09-27 19:27:53 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126798468 9141461 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126798587 My third attempt!!!!!]]> 2016-09-27 19:28:20 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126798587 s924488 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126930353 what i like is that you made the corners even 
and what i think you should of done is that you should of gut that crack in the side and cover it up so it would look better

]]> 2016-09-28 12:38:24 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126930353 s842430 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126930609 I think that their pot is very evenly pinched on both sides. He/she did a very wonderful job. But I think that you could've made the pot more wide not thin and tall. But you can do what you want to do.😜]]> 2016-09-28 12:39:06 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126930609 s10190581 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126930613 I like how the right corner is very even, but the top looks uneven, if you were to set it on the table. The right corner is a little bit thicker than the right corner.]]> 2016-09-28 12:39:06 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126930613 s1013121 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126930701 It looks really good. I like that the walls look pretty even. It looks like a very nice pot, I can't wait to see what it turns out to be.]]> 2016-09-28 12:39:23 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126930701 s910654 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126930794 The Pot looks Really good! The walls look mostly even, but one suggestion. you could maybe apply a little more pressure to the corners. The top was even and it wasn't cracking! Over all a great pot!]]> 2016-09-28 12:39:42 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126930794 s949448 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126930837 I like how the pinch pot looks overall, but o the right side it is kind of falling over. You could maybe pick that wall back up and smooth it in with the pot. Other than that everything looks great.]]> 2016-09-28 12:39:48 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126930837 s906261 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126931052 2016-09-28 12:40:24 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126931052 s967897 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126931082 i think it looks great.the sides seem pretty smooth. maybe pinch a little harder. but other than tat  suggestion it look awesome]]> 2016-09-28 12:40:30 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126931082 s913625 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126931315 I really like the shape of your pot, the walls and sides seem very even. But one suggestion I have is to smooth out the top of the pot so all is even. Overall you have created a nice piece. 
- Alyssa Gast]]> 2016-09-28 12:41:10 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126931315 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126931378 i think you could have probably made it rounder but after all it looks good bro
 ]]> 2016-09-28 12:41:21 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126931378 liaEpayne https://padlet.com/oconnorkick/rn6ec57qocug/wish/126931582 I would like to start by saying I love the shape of your pot, and you smoothed it out very well. A suggestion I would like to make is to pinch with a little more force, because your pot appears to have very thick walls. ]]> 2016-09-28 12:41:57 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126931582 s924488 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126931775 what i like is that your corners are well shaped 
what you should of done is that you should of smoothed the in side of you pot

]]> 2016-09-28 12:42:41 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126931775 s842430 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126932292 2016-09-28 12:44:13 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126932292 s906261 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126932352 I like how your sides seem pretty even. Though one thing I think you could improve would be your wall thickness. Maybe don't press as hard. Still nice pot, and it seems well pinched.

]]> 2016-09-28 12:44:23 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126932352 s949448 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126932533 I like how it looks very rounded. Maybe you could smooth it out on the outside because it looks like you have lots on pinches. ]]> 2016-09-28 12:44:54 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126932533 s933333 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126932644 I think you could pick a little more on the left side. ]]> 2016-09-28 12:45:13 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126932644 s842430 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126932688 I think that it is very nice but you can smooth it out and have it not so wide as you have it. But over all I think that you did a great job.😇]]> 2016-09-28 12:45:23 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126932688 liaEpayne https://padlet.com/oconnorkick/rn6ec57qocug/wish/126932747 I think that your pot looks very nice because of the width and height making it appear to be very even. A suggestion I'd like to make is to pinch with a little less force because of the thinness in your walls, but overall a great work of art!]]> 2016-09-28 12:45:33 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126932747 s910654 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126933058 It looks amazing! I love how it looks so even! But I have one suggestion, maybe you could have pinched a bit harder at the top so that there would be a bit larger of a hole. But other than that it was great😀👍]]> 2016-09-28 12:46:20 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126933058 s10190581 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126933179 I like how the walls are very even and the top is nice and flat, but I think the opening in the top is a little more square than I believe you intended.]]> 2016-09-28 12:46:38 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126933179 s905296 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126933181 the pot looks great!!!! i would not use a spike to carve the eyes, use a loop tool to carve so it makes it pop out a little more.

]]> 2016-09-28 12:46:39 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126933181 s967897 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126933221 yours looks great. but maybe you shouldn't pinch too hard. if you were going for a cup then mr oconner told me pinch more up and if you were going for a bowl pinch out. other than a few suggestions it looks great]]> 2016-09-28 12:46:45 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126933221 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126933337 maybe garretoo you can make it rounder but after all it looks great bro.]]> 2016-09-28 12:47:03 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126933337 s933333 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126933353 2016-09-28 12:47:06 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126933353 s913625 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126933525 Your pot looks very smooth and has a great circular shape. One suggestion I have is to apply less force and pinching on the top left  side, creating an even pot. Other than that your pot is great.
- Alyssa Gast ]]> 2016-09-28 12:47:36 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126933525 s1013121 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126933680 The walls look pretty even, but the top rim looks kind of bent. I would fix that if you have a chance. Overall a very nice pot, but again I would fix the rim.]]> 2016-09-28 12:48:03 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126933680 s905824 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126933951 Leo's 3rd Attempt]]> 2016-09-28 12:48:47 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126933951 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126934507 2016-09-28 12:50:30 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126934507 s905824 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126934513 Its good but the middle is really close in and you could make it not do that by not pinching from the out in.]]> 2016-09-28 12:50:31 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126934513 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126934587  I really like how you smoothed out the side of the pot. I think that you could improve on is making the top part even on all the sides. It is a very good pot. :)

]]> 2016-09-28 12:50:47 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126934587 s906261 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126934598 I think you did a good job on keeping a good consistency of thickness. Your walls do not seem thin. The only thing to improve is on elf your sides is thinner than the rest.]]> 2016-09-28 12:50:50 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126934598 liaEpayne https://padlet.com/oconnorkick/rn6ec57qocug/wish/126935172 2016-09-28 12:52:26 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126935172 s905824 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126935217 You could not make it curve in at the top by not banging it on the table to much or making it to thin.]]> 2016-09-28 12:52:32 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126935217 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126935798 I really like the style of you pot. I like how the wall of the pot are even with the bottom of the pot. Somethings tat i would improve on it making sure that the top of the pot is even. It is a very good pot overall. :D]]> 2016-09-28 12:54:00 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126935798 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126936058 2016-09-28 12:54:38 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126936058 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126936337 I like how the walls are so even . I suggest that you just smooth the bottom more.]]> 2016-09-28 12:55:15 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126936337 https://padlet.com/oconnorkick/rn6ec57qocug/wish/126937926 I like how the top is smooth and even but, I suggest that you pinch more so the hole is bigger and smooth the outside]]> 2016-09-28 12:59:36 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/126937926 s951652 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127086318 Tater Tot]]> 2016-09-28 18:53:05 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127086318 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127086357 2016-09-28 18:53:13 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127086357 s905439 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127086730 I like your pinchpot's thickness. I think you pinched with the perfect amount of force and did it properly. Next time, i would maybe try to smooth it out a little more and get the finger prints out. You could do this by adding slip or water, and/or using one of Mr. O'Conner's smoothing tools. Otherwise, your pinch pot is pretty good! 😃]]> 2016-09-28 18:54:19 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127086730 s905910 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127086857 I like how your walls are even. One suggestion is, I think you could smooth out the inside and outside. You can get your hand wet and then just smooth. Overall nice pot :)]]> 2016-09-28 18:54:42 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127086857 s906164 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127086939 I like how your pinch pots style because it looks like you really took your time to form the shape of the pinch pot . Something you could maybe improve on is smoothen out the sides by after pinching it lightly smoothen out the out side.  ]]> 2016-09-28 18:54:56 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127086939 s9074661 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127087021 your pinch pot has a very good shape and height, but maybe you could smooth out some of the pinch marks with water or make your pinching even. You did a great job!]]> 2016-09-28 18:55:12 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127087021 s906468_student https://padlet.com/oconnorkick/rn6ec57qocug/wish/127087035 My third attempt!😋]]> 2016-09-28 18:55:15 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127087035 s1013650 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127087223 I like your pot. It is even and smooth on all the sides and in the inside are all even, but you could of made the finger marks on the pot a little smoother but the than that it looked really good.:) ;)]]> 2016-09-28 18:55:46 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127087223 s1000405 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127087295 I like the general shape of the piece, but you could pinch with more force to made the walls thicker. Your comment for Madeline Tucker's is really good by the way.😇]]> 2016-09-28 18:56:01 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127087295 s905165 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127087481 It is well made on all sides and it is the correct thickness. Also, it is hard to tell, but it looks about the correct depths as well. I think you could have made it more circular but that might have also been on purpose for the piece. Over all, it is a great piece and I like it.]]> 2016-09-28 18:56:37 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127087481 s918812 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127087526 Your pot is very smooth and even. I think you made it well. You could have pressed closer together to get rid of some of the finger prints.]]> 2016-09-28 18:56:45 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127087526 s1018370 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127087631 2016-09-28 18:57:09 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127087631 s951652 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127088078 You did a great job on smoothing out your piece but I suggest not making it so thick by pinching harder on the sides]]> 2016-09-28 18:58:43 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127088078 s905910 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127088459 I really like how you smoothed it out. One suggestion is you could pinch a little harder to make the walls a little thinner. Overall nice pot :)]]> 2016-09-28 18:59:44 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127088459 s1020200 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127088562 2016-09-28 19:00:04 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127088562 s1020025 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127088586 2016-09-28 19:00:07 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127088586 s905165 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127088593 I like the design of the piece and I think it is the right depths and thickness on the sides. I think you could have smoothed out the top anymore. Over all, it is a great piece for your design.]]> 2016-09-28 19:00:08 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127088593 s1000405 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127088605  I like how smooth the pot is and it appears to be the correct depth, but you could pinch the walls with more force to make the walls thinner. 😇]]> 2016-09-28 19:00:10 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127088605 s905439 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127088659 Your pinch pot has a great shape and I love how smooth it is. My suggestion to you would to maybe make the walls a little thicker because they are very thin and they probably aren't very sturdy. Other than that, your pinch pot is GREAT!!!!!!!!!!!!!!!!!!😉]]> 2016-09-28 19:00:19 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127088659 s918812 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127088694 Your pot is almost the same width all around. On the lid you could have made the side smoother.]]> 2016-09-28 19:00:27 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127088694 s1020200 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127088706 i really like the texture of your pot.I think you could have carved "to:" in better by using one of the tools with the curved ends. Overall it was very good.]]> 2016-09-28 19:00:29 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127088706 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127088750 the size of the clay pot is a good size and looks pretty smooth but you could make it look more professionals.]]> 2016-09-28 19:00:38 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127088750 s1020025 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127088792 Your pot looks really good, it is very smooth on the outside of it! 
You did a good job of making the sides even-i can't find anything wrong with it. 
Ella ]]> 2016-09-28 19:00:48 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127088792 s1013650 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127088811 Your pot looks great. It is smooth and even, but you could of made those  extra marks on the pot.]]> 2016-09-28 19:00:52 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127088811 s9074661 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127088824 Your pot is very well rounded, and I like how you rounded the corners in. Maybe you could smooth out the pinch marks by pinching more even or with water]]> 2016-09-28 19:00:57 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127088824 9141461 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127088920 I like your pot it looks really good! But one suggestion is that you can pinch alittle softer. But a way to change it is to put clay on it the thin parts to make it thicker. But otherwise i really like it. :-)]]> 2016-09-28 19:01:16 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127088920 s943406_student https://padlet.com/oconnorkick/rn6ec57qocug/wish/127089147 2016-09-28 19:02:08 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127089147 907590_atstudent_knowschools_org https://padlet.com/oconnorkick/rn6ec57qocug/wish/127089406 2016-09-28 19:03:13 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127089406 s1020025 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127089553 Anonymous (Aiden) your pot is really good-I love the shape of it! the only tip that i have for you is that maybe you would like to smooth the outside of the pot a little bit more with one of Mr. O'Conner's tools. Also you could score and slip a little bit more clay onto the outside, it looks a little bit thin. Your pot is really good!
Ella Morse]]> 2016-09-28 19:03:47 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127089553 s1018370 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127089762 i think that you could have smoothed out the cracks on the front but otherwise i thought it was good 😀

]]> 2016-09-28 19:04:43 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127089762 s1020200 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127089941 I really like how you made your pot wide. One thang i like about your pot you should change is how thin it is you could have pressed less hard but overall good job.]]> 2016-09-28 19:05:24 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127089941 s943406_student https://padlet.com/oconnorkick/rn6ec57qocug/wish/127090106 I like how your pinch pot is so smooth and if i could give you a suggestion it would be to pinch a little more harder at the top and smoothen it out a little bit. Other then that it looks awesome.]]> 2016-09-28 19:06:06 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127090106 9141461 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127090267 i like your pot but i think that you can pinch little harder on the top but otherwise it looks great. :-}]]> 2016-09-28 19:06:49 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127090267 s906468_student https://padlet.com/oconnorkick/rn6ec57qocug/wish/127090431 Good job Elizabeth! I think that overall, your pot looks very nice. I especially like how it is very, very smooth. A suggestion I could give is to smooth the top left side down just a bit so that it would be more even with your right side. You could do this by pushing down on the edge, or putting your piece upside down on the table and pushing down slightly while it is upside down. Great job!]]> 2016-09-28 19:07:35 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127090431 s913437_student https://padlet.com/oconnorkick/rn6ec57qocug/wish/127091163 Your pot looks very nice! The walls look even and it is very smooth. However, the pot looks a bit wide and you could have pinched it less so that it would stay smaller and not get as wide or thick. Great job!]]> 2016-09-28 19:10:11 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127091163 s927793 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127091274 Attempt 2 ]]> 2016-09-28 19:10:34 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127091274 s927793 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127092261  You did a good job on making the walls even but I think you could've done a better job on making the bottom less lopsided by maybe pinching in little less areas and taking a little more time.]]> 2016-09-28 19:14:38 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127092261 s905824 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127223276 You could have not curved the edge by not pinching to hard on the in to the out.But it is not to thick and not to thin 👍🏽]]> 2016-09-29 12:37:50 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127223276 s905824 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127224587 Its a bit to thin so you don't have to pinch to hard.]]> 2016-09-29 12:42:09 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127224587 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127377802 I really liked your pinch pot because the sides were really even really even and smooth . The one  I would change about your pinch pot would be that I would make it a little bit thinner on the edges by not pinching as much. Other that that it was great!😀]]> 2016-09-29 18:59:42 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127377802 https://padlet.com/oconnorkick/rn6ec57qocug/wish/127383526 I really like your pinch pot because the sides are really even. The only thing that I would have changed would be not pinch it as much on the the top of the pinch pot so it would be thicker.Other than that your pinch pot was great!😀  ]]> 2016-09-29 19:19:04 UTC https://padlet.com/oconnorkick/rn6ec57qocug/wish/127383526