https://padlet.com/sirwil7959/qekwu7rh6ams Made with fortitude en-us 2018-03-05 13:36:39 UTC 2018-03-12 13:14:25 UTC hello@padlet.com sirwil7959 https://padlet.com/sirwil7959/qekwu7rh6ams/wish/238075593 Step 1:Grab a Cylinder block, a square block, coil wire copper a battery pack with a positive and negative wire, a battery pliers magnets hot glue and a drill with a small bit 
 
Step 2:   Use the pliers to make a loop in the copper wire.

Step 3: Drill 2 holes in the square piece of  wood make sure they are an inch apart.

Step 4: Put the amature in the copper loops then make sure they are in place.

Step 5: spin the armature to make sure it spins good.

Step 6:  wrap the wires around the copper wires.

Step 7: place the magnet under the Armature. make sure every thing works.

Step 8: hot glue the magnet and copper wires to the block.

step 9: Have fun and be safe!]]> 2018-03-05 14:03:59 UTC https://padlet.com/sirwil7959/qekwu7rh6ams/wish/238075593 sirwil7959 https://padlet.com/sirwil7959/qekwu7rh6ams/wish/238077446 I placed a battery in a battery pack and tied the negative and positive wires arounded my copper wires.]]> 2018-03-05 14:07:12 UTC https://padlet.com/sirwil7959/qekwu7rh6ams/wish/238077446 sirwil7959 https://padlet.com/sirwil7959/qekwu7rh6ams/wish/238079817 the battery, battery pack and wires are my motor and my armature i my coil wire and my commutator is my magent]]> 2018-03-05 14:10:58 UTC https://padlet.com/sirwil7959/qekwu7rh6ams/wish/238079817 sirwil7959 https://padlet.com/sirwil7959/qekwu7rh6ams/wish/238081175 My motor works with the copper wires and magenets to help spin the coil wire around]]> 2018-03-05 14:13:05 UTC https://padlet.com/sirwil7959/qekwu7rh6ams/wish/238081175 sirwil7959 https://padlet.com/sirwil7959/qekwu7rh6ams/wish/238591215 I had to sand the armature because of popularity ]]> 2018-03-06 13:48:00 UTC https://padlet.com/sirwil7959/qekwu7rh6ams/wish/238591215