DEE2D - WEEK 8 - INDIVIDUAL PRACTICE (Door Mat) by FAIRUZ LIZA Shuhaimi https://padlet.com/fairuzliza/qcnil5enor6xy6zv Please share your answers here.. en-us 2021-04-19 02:10:02 UTC 2026-01-13 02:41:11 UTC hello@padlet.com https://padlet.net/icons/png/1f642.png ANIS IWANI BINTI MOHAMMED YUSOF - 01DEE20F1098 https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1432130233 Making a doormat
1. First, the length and the width of the coir are measured.
2. Second, a large piece of paper is used as a canvas.
3. Third, on the paper the preferred doormat shape is drawn by using a marker pen.
4. Fourth, the coir is flipped over.
5. Next, the paper template is laid on the top of coir.
6. Then, the design is traced by using permanent marker.
7. After that, the lines are cut along the design.
8. Subsequently, a stencil is cut out from a piece of cardboard.
9. Also, the stencil is placed on the surface of the new coir mat.
10. Finally, the stencil is spray painted all over.

Safety Measures:
1. Wear gloves if you’re handling sharp objects.
2. Always wear appropriate clothing and shoes.
3. Always follow the correct procedures.]]> 2021-04-19 08:46:30 UTC https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1432130233 MUHAMMAD AFIQ BIN SAPAWI (01DEE20F1100) "MAKING A DOORMAT" https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1432301869 1) Firstly, the length and the width are measured of the coir.
2) Secondly, a large piece of paper is used as a canvas.
3) Thirdly, the preferred doormat shape on the paper is drawn by using a marker pen. 
4) Next, the coir is flipped over.
5) Then, the paper template flat is laid on top of coir.
6) After that, the design is traced  by using a permanent marker.
7) Later, the design is cut along the lines.
8) Next, a stencil is cut out from a piece of cardboard.
9) Then, the stencil is placed on the surface of the new coir mat.
10) Finally, the stencil is sprayed paint all over.

Safety Measures :
i) You need to be careful when using sharp tools to avoid injury.
ii) Wear gloves when spray because to avoid from exposed to paint
ii) Keep the paper away from any possibility that could make the paper damaged or torn ]]> 2021-04-19 09:51:06 UTC https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1432301869 SITI NORLIYANA BINTI JASNY(01DEE20F1097) https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1432374930 1)Firstly, the length and the width  of the coir are measured.
2)Secondly, a large piece of paper  is used as a canvas.
3)Thirdly, the preferred doormat shape on the paper is drawn by using a maker pen.
4)Then, the coir is flipped over.
5)Next, the paper template flat is laid on top of coir.
6)  Then, the design is traced by using a permanent marker.
7)Subsequently, the design is cut along the lines.
8) After that, a stencil is cut from a piece of cardboard.
9)Then, the stencil is placed on the surface of the new coir mat.
10) Lastly, the stencil is sprayed paint all over.

Safety Measures :
1) Be careful when using a sharp knife to avoid injury.
2) Use an apron  to avoid cloth dirty.
3)Before cut the stencil put a thin wood on the stencil to avoid the floor damage.

]]> 2021-04-19 10:22:00 UTC https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1432374930 HO JIA WEI https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1436277523 01DEE20F1083
1.Firstly, the length and the width of the coir are measured. 
2.Next, a large piece of paper is used as a canvas. 
3.After that, the preferred doormat shape is drawn on the paper by using a marker pen.
4.Then, the coir is flipped over.
5.Next, the paper template is laid flat on top of coir.
6.Subsequently, the design is traced by using a permanent marker.
7.After that, the design is cut along the lines.
8.Then, a stencil is cut out form a piece of cardboard.
9.Next, the stencil is placed on the surface of the new coir mat.
10.Lastly, the stencil is sprayed paint all over .

Safety measures
1.You need to be careful when using the sharp tools to avoid injuries.
2.You must wear a mask to avoid sucking too much the smell of paint.
3.You should wear long sleve to avoid the paint harm your skin.]]> 2021-04-20 04:55:05 UTC https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1436277523 RISBAN A/L RAVI https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1436371144 01DEE20F1094
1.Firstly,the length and the width of the coir are measured.
2.Secondly,a large piece of paper is used as a canvas.
3.Then,the preferred doormat shape is drawn on the paper by using a marker pen.
4.After that,the coil is flipped over.
5.Then,the paper template is laid flat on top of coir.
6.Subsequently,the design is traced by using a permanent marker.
7.After that,the design is cut along the lines.
8.Then,the stencil is cut out from a piece of cardboard.
9.Later,the stencil is placed on the surface of the new coir mat.
10.Finally,the stencil is sprayed paint all over.

Safety Measures
1. Be careful when using sharp tools to avoid injuries.
2.Wear apron to avoid the spray from dirt the cloth.
3.Wear mask to avoid breathe smell of spray.

]]> 2021-04-20 05:37:19 UTC https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1436371144 NUR SHAZLIYANA BINTI ZAMURI (01DEE20F1092) https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1436441932 Making a doormat 
 1. First of all , the length and the width of the coir are measured.
2. Second , a large piece of paper as a canvas is used.
3. Third, the preferred doormat shape on the paper is drawn by using a marker pen.
4.  Fourth, the coir is flipped over.
5. Then, the paper template flat is laid on top of coir.
6. Next, the design is traced by using a permanent marker.
7. After that, the design is cut along the lines.
8. Later, a stencil is cut out from a piece of cardboard.
9. Subsequently, the stencil is placed on the surface of the new coir mat.
10. Finally, the stencil is spray all over.

 3 safety measures :
1. Wear an apron to avoid cloth from being exposed to paint.
2. Be careful when handling sharp tools to avoid injuries.
3. Wear a mask to avoid inhalation of paint chemicals while using paint spray.
]]> 2021-04-20 06:04:46 UTC https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1436441932 NUR ALYAA ATHIRAH BINTI RIZALUDDIN (01DEE20F1102) https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1436553564 1. Firstly, the length and the width of the coir are measured.
2.Secondly, a large piece of paper is used as a canvas.
3. Thirdly, the preferred doormat shape on the paper is drawn using a marker pen.
4.Then, the coir is flipped over.
5.After that, the paper template flat is laid on top of coir.
6.Next, the design is traced by using a permanent marker.
7.Then, the desigm is cut along the lines.
8.Subsequently, a stencil is cut out from a piece of cardboard.
9.Next, the stencil is placed on the surfaced of the new coir mat.
10. Lastly, the stencil is sprayed paint all over.


3 safety measures:
1- Wear an apron to avoid cloth dirt.
2- Wear long sleve to protect our skin
3. Be careful when using sharp tools to avoid injuries.]]> 2021-04-20 06:43:41 UTC https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1436553564 MUHAMMAD HAZIM AZRI BIN ROZLAN https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1437740920 (01DEE20F1085)

1. Firstly, the length and the width of the coir are measured.
2.Secondly,a large piece of paper is used as a canvas. 
3.Next, the preferred doormat shape is drawn on the paper by using a marker pen.
4.Then, the coir is flipped over.
5.After that,the paper template
is laid flat on top of coir.
 6.Next,the design is traced by using a permanent marker. 
7.Then, the design is cut along the lines. 
8.After that, a stencil is cut out form a piece of cardboard. 
9.Next, the stencil is placed on the surface of the new coir mat.
10.Lastly, the stencil is sprayed paint all over.]]> 2021-04-20 13:17:29 UTC https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1437740920 MUHAMMAD FIRDAUS BIN MOHAMAD AZLEE 01DEE20F1093 https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1440765670 MAKING A DOORMAT

1) Firstly, the length and the width are measured of the coir.
2) Secondly, a large piece of paper is used as a canvas.
3) Thirdly, the preferred doormat shape on the paper is drawn by using a marker pen. 
4) Fourthly, the coir is flipped over.
5) Next, the paper template is laid flat on top of coir.
6) After that, the design is traced  by using a permanent marker.
7) Later, the design is cut along the lines.
8) Subsequently, a stencil is cut out from a piece of cardboard.
9) Then, the stencil is placed on the surface of the new coir mat.
10) Finally, paint is sprayed all over the stencil.

Safety measures
1)Wear glove to avoid injury.
2)Wear a face mask to avoid inhalation of paint chemicals.
3)Be careful using the knife si as not to get injured.]]> 2021-04-21 02:32:42 UTC https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1440765670 LUQMAN HAKIMI BIN MOHD AZAN (01DEE20F1088) https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1441449542 1. Firstly, the length and the width of the coir are measured.
2. Secondly, a large piece of paper is used as a canvas.
3. Thirdly, the preferred doormat shape on the paper is drawn by using a marker pen.
4. Next, the coir is flipped over.
5. After that, the paper template is laid flat on top of coir.
6. Then, the design is traced by using a  permanent marker.
7. Later, the design is cut along the lines.
8. Subsequently, a stencil is cut out from a piece of cardboard.
9. Next, the stencil is placed on the surface of the new coir mat.
10. Finally, the stencil is sprayed paint all over.

3 safety measures:
1. Wear a glove when using  the knife to prevent an injury to your finger.
2. Wear a suitable mask when using the spray paint to avoid inhaling the hazardous of the chemical paint.
3. Use a open area when you use the spray paint to reduce chemicals vapours around you.]]> 2021-04-21 07:32:07 UTC https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1441449542 MUHAMMAD ZAIM BIN OSMAN(01DEE20F1087) https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1442561471
 1.First of all,the length and the width of the coir are
measured.
 2.Then,a large piece of paper is used as a canvas.
 3.Next,the preferred doormat shape is drawn on the paper by
using a marker pen.
 4.After that,the coil is flipped over.
 5.Then,the paper template is laid flat on top of coir.
 6.Next,the design is traced by using a permanent marker.
 7.After that,the design is cut along the lines.
 8.Then,the stencil is cut out from a piece of cardboard.
 9.Later,the stencil is placed on the surface of the new coir
mat.
 10.Finally,the stencil is sprayed paint all over.
 
 Safety Measures
 1. Wear safety glasess to protect eyes from a splashes spray.
 2.Wear apron to make sure the spray can’t dirty the cloth.
 3.Wear mask to protect the breathing and smell the spray

]]> 2021-04-21 13:47:46 UTC https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1442561471 MUHAMMAD DANIAL AISY BIN ANIZAM(01DEE20F1084) https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1442583050 1. Firstly, the length and the width of the coir are measured.
2.Secondly,a large piece of paper is used as a canvas. 
3.Next, the preferred doormat shape is drawn on the paper by using a marker pen.
4. After that, the coir is flipped over.
5. Subsequently, the paper template is laid flat on top of coir.
6. Then, the design is traced by using a  permanent marker.
7. Later, the design is cut along the lines.
8.Then,the stencil is cut out from a piece of cardboard.
9. Next ,the stencil is placed on the surface of the new coir
mat.
 10.Finally,the stencil is sprayed paint all over.

Safety Measures
1. Wear suitable clothing and apron to avoid cloth get dirty
2.Hold knife properly so that you don't hurt yourself
3. Wear face mask to avoid inhaling spray chemicals]]> 2021-04-21 13:52:07 UTC https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1442583050 MOHAMAD ZULSYAHIMAN BIN BAHARUDIN (01DEE20F1096) https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1443377012 1.Firstly, the length and the width of the coir are measured. 
2.Next, a large piece of paper is used as a canvas. 
3.After that, the preferred doormat shape is drawn on the paper by using a marker pen.
4.Then, the coir is flipped over.
5.Next, the paper template is laid flat on top of coir.
6.Subsequently, the design is traced by using a permanent marker.
7.After that, the design is cut along the lines.
8.Next, a stencil is cut out form a piece of cardboard.
9.Then, the stencil is placed on the surface of the new coir mat.
10.Lastly, the stencil is sprayed paint all over .

Safety Measures
1. Wear a glove to avoid injury at hand.
2.Wear an apron to protect our cloth
3.Wear a mask to prevent from inhaling spray chemicals]]> 2021-04-21 16:22:02 UTC https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1443377012 MUHAMMAD WAFI BIN MOHD ASRI (01DEE20F1099) https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1444510340 MAKING A DOORMAT
  1. Firstly, the length and the width of the coir are measured.
  2. Secondly, a large  piece of paper is used as a canvas.
  3. Thirdly, the preferred doormat shape is drawn  on the paper by using a marker pen. 
  4. Next, the coir is flipped over.
  5. Subsequently, the paper template is laid flat on top of coir.
  6. Next, the design is traced by using a permanent marker.
  7. Then, the design is cut along the lines.
  8. Afterward, a stencil is cut out from a piece of cardboard.
  9. After that, the stencil is placed on the surface of the new coir mat.
  10. Finally, the stencil is sprayed paint all over.

Safety Measures:
  1. Wear appropriate safety equipment to avoid injury.
  2. Be careful when measuring, cutting and painting to avoid danger.
  3. Follow the following procedure step by step to avoid mistakes in the manufacture of doormat.

]]> 2021-04-21 20:34:35 UTC https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1444510340 MUHAMAD HARITH IRFAN BIN MOHD NAZRI (01DEE20F1095) https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1445338619 DOORMAT

1. Firstly, the coir is measured length and width .
2. Secondly, large piece of paper is used as a canvas . 
3. Thirdly, the paper by using a marker pen is drawed by preferred doormat shape . 
4. Fourth, the coir are fliped over . 
5. Fifth, the paper flat template is layed on top of coir . 
6. Then, the design is traced by using a permanent marker. 7. After that, the design is cut along the lines.
8. Next, a stencil is cut out from a piece of cardboard. 
9. Subsequently, the stencil is placed on the surface of the new coir mat.
10. Finally, paint all is sprayed over the stencil .

Safety Measures
1. Wear glove to avoid hand from exposure to spray
2. Wear eye protector to avoid spray dusk .
3. Wear a face mask before spray paint to prevent paint gas from inhal]]> 2021-04-22 02:33:42 UTC https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1445338619 Muhammad Nizzul Hazim Bin Asrul Fahizan (01DEE20F1101) https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1445353880 Doormat

1) Firstly, the coir is measured length and width .
2) Secondly, large piece of paper is used as a canvas .
 3) Thirdly, the paper by using a marker pen is drawed by preferred doormat shape .
4) Fourth, the coir are fliped over . 
5) Fifth, the paper flat template is layed on top of coir .
6) Then, the design is traced by using a permanent marker. 7) After that, the design is cut along the lines.
8) Next, a stencil is cut out from a piece of cardboard. 
9) Subsequently, the stencil is placed on the surface of the new coir mat.
10) Finally, paint all is sprayed over the stencil .

Safety Measures
1. Wear glove to avoid hand from exposure to spray
2. Wear eye protector to avoid spray dusk .
3. Wear a face mask before spray paint to prevent paint gas from inhal.]]> 2021-04-22 02:39:26 UTC https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1445353880 NURUL BALQIS BINTI SOLAHUDIN(01DEE20F1090) https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1445428337 1.Firstly,the length and the width of the coir are measured.
2.Next,a large piece of paper is used as a canvas.
3.Then,the preferred doormat shape is drawn on the paper by using a marker pen.
4.After that.the coir ia flipped over.
5.Subsequently,the paper template flad is laid on top of coir.
6.Next,the design is traced by using a permanent marker.
7.Then,the design is cut along the lines.
8.Subsequently,a stencil is cut out from a piece of cardboard.
9.After that,the stencil is placed on the surface of the new coir mat.
10.Finally.the stencil is sprayed over the stencil.

3 safety measures
1.wear a apron
2.wear a mask
3.wear eye protector]]> 2021-04-22 03:09:50 UTC https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1445428337 MUHAMMAD IQBAL HAZIQ BIN NORAZLI 01DEE20F1107 https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1445606204 #Making a Door Mat
1)Firstly,the lenght and the width of the coir are measured.
2)Secondly,a large piece of paper is used as a canvas.
3)Thirdly,the preferred doormat shape is drawn on the paper by using a marker pen.
4)Then,the coir is fliped over.
5)Next,the paper template is laid flat on top of coir.
6)After that,the design is traced by using a permanent marker.
7)Next,the design is cut along the lines.
8)Then,the stencil is cut out from a piece of cardboard.
9)After,the stencil is placed on the surface of the new coir mat.
10)Lastly,the stecil is sprayed paint all over.


#Safety measures :-
1)Wear safety gloves to avoid our hand from paint.
2)Wear mask to avoid from inhale dust.
3)Wear glasses to avoid dust from get into our eyes.]]> 2021-04-22 04:41:23 UTC https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1445606204 MUHAMMAD AKMAL BIN MOHD AZMI https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1445804710 01DEE20F1103

1)Firstly, the length and the width  of the coir are measured.
2)Secondly, a large piece of paper  is used as a canvas.
3)Thirdly, the preferred doormat shape on the paper is drawn by using a maker pen.
4)After that, the coir is flipped over.
5)Next, the paper template flat is laid on top of coir.
6)  Then, the design is traced by using a permanent marker.
7)Subsequently, the design are  cut along the lines.
8) After that, a stencil is cut from a piece of cardboard.
9)Then, the stencil is placed on the surface of the new coir mat.
10) Lastly, the stencil is sprayed paint all over.

 Safety measures :
1. Wear an apron to avoid cloth from being exposed to paint.
2. Be careful when handling sharp tools.
3. Wear a mask to avoid inhalation of paint chemicals while using paint spray.



]]> 2021-04-22 06:07:27 UTC https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1445804710 SHARVIN RAAJ A/L SUNDRAM https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1445808118 01DEE20F1089

1)Firstly,the length and the 
width of the coir are measured.
2)Secondly, a large piece of paper is used as a canvas.
3)Thirdly, the preferred doormat shape on the paper is drawn by using a maker pen.
4)Fourth,the coir is flipped over
5)Next, the paper template flat is laid on top of coir.
6)Then, the design is traced by using a permanent marker
7)Subsequently,the design are cut along the lines
8)After that, a stencil is cut from a piece of cardboard.
9)Then,the stencil is placed on the surface of the new coir mat 
10)Lastly,the stencil is sprayed paint all over ]]> 2021-04-22 06:08:47 UTC https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1445808118 MUHAMAD HANIF YUSMAN BIN MOHD HANAPPI 01DEE20F1091 https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1445808339 1. Firstly, the length and the width of the coir are measured.
2.Secondly,a large piece of paper is used as a canvas. 
3.Next, the preferred doormat shape is drawn on the paper by using a marker pen.
4.Then, the coir is flipped over.
5.After that,the paper template
is laid flat on top of coir.
 6.Next,the design is traced by using a permanent marker. 
7.Then, the design is cut along the lines. 
8.After that, a stencil is cut out from a piece of cardboard. 
9.Next, the stencil is placed on the surface of the new coir mat.
10.Lastly, the stencil is sprayed paint all over.

3 safety measures :
1. Wear glove to avoid hand from exposure to spray.
2. Be careful when handling sharp tools to avoid injuries.
3. Wear a mask to avoid inhalation of paint chemicals while using paint spray.
]]> 2021-04-22 06:08:51 UTC https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1445808339 HARITHARAN A/L RAVI 01DEE20F1082 https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1445829890 Making proses of Door Mat
1)In begining , the lenght and the width of the coir are measured.
2)Secondly,a large peice of paper is used as a canvas.
3)Then,the preferred doormat shape on the paper is drawn by using a maker pen.
4)Next,the coir is flipped over
5)After that,the paper template flat is laid top of coir.
6)Then,the design is traced by using a permanent maker
7)Next,the design are cut along the lines.
8)After, that a stencil is cut from a piece of cardboard.
9)Then,the stencil is placed on the new coir mat.
10)Lastly,the stencil is sparay.]]> 2021-04-22 06:16:26 UTC https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1445829890 FATHUR RAUF KHAIRI 01DEE20F1108 https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1445833846 DOORMAT
1. Firstly, the length and the width of the coir are measured.
2.Second,a large piece of paper is used as a canvas. 
3.Next, the preferred doormat shape is drawn on the paper by using a marker pen.
4.Then, the coir is flipped over.
5.After that,the paper template
is laid flat on top of coir.
 6.Next,the design is traced by using a permanent marker. 
7.Then, the design is cut along the lines. 
8.After that, a stencil is cut out from a piece of cardboard. 
9.Next, the stencil is placed on the surface of the new coir mat.
10.Lastly, the paint is sprayed all over the stencil.

3 safety measures :
1. Wear an apron to avoid cloth from being exposed to paint.
2. Be careful when handling sharp tools to avoid any injuries.
3. Wear a mask to avoid inhalation of paint chemicals.
]]> 2021-04-22 06:17:52 UTC https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1445833846 MUHAMMAD AMIERUL BIN SHAMSUDIN https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1445847709 01DEE20F1104
1.Firstly, the length and the width of the coir are measured.
2.Secondly,a large piece of paper is used as a canvas.
3.Next,the preferred doormat shape is drawn on the paper by using a marker pen.
4.After that, the coir is flipped over.
5.Then, the paper template is laid flat on top of coir.
6.Later, the design is traced by using a permanent marker.
7.Then, the design is cut along the lines.
8.Next, the stencil is cut out from a piece of cardboard.
9.After that, the stencil is placed on the surface of the new coir mat.
10.Lastly, the stencil is sprayed paint all over


SAFETY MEASURES:
1.Wear a glove during cutting
2.Wear a mask to avoided inhaling spray get into mouth
3.Wear an apron to avoid cloth get dirty]]> 2021-04-22 06:22:55 UTC https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1445847709 MUHAMMAD IRFAN HANAFI BIN AHMAD NIZAM (01DEE20F1105) https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1445875280 #Making a Door Mat
1)Firstly,the lenght and the width of the coir are measured.
2)Secondly,a large piece of paper is used as a canvas.
3)Thirdly,the preferred doormat shape is drawed on the paper by using a marker pen.
4)Then,the coir is fliped over.
5)Next,the paper template flat is layed on top of coir.
6)After that,the design is traced by using a permanent marker.
7)Next,the design is cut along the lines.
8)Then,the stencil is cut out from a piece of cardboard.
9)After,the stencil is placed on the surface of the new coir mat.
10)Lastly,the stecil is sprayed paint all over.

Safety measures
1.use an apron when spray to protect cloths
2.carefully when cut a stencil to avoid accident
3.use hand glove when spray to protect our hand.

]]> 2021-04-22 06:32:52 UTC https://padlet.com/fairuzliza/qcnil5enor6xy6zv/wish/1445875280