https://padlet.com/m_de18maria/nnjqpg1i0oel Designed with a bit of creativity en-us 2017-07-16 10:36:16 UTC 2017-07-16 10:52:42 UTC hello@padlet.com m_de18maria https://padlet.com/m_de18maria/nnjqpg1i0oel/wish/178785115 Material Required: - Multi-layer wood panels: 6mm thick multilayer poplar was used in the project (but hardwood is recommended); - Bolts, nuts and assorted screws: several pins and screws of various sizes are required to fit the physical structure, which may vary depending on the size chosen for the robotic arm; - Drill; - Empty aluminum tubes: are placed around the pins to keep the distances between the parts of the robot; - Servomotors: seven servomotors are used, two of which are based to provide a higher torque than the others. - Arduino Mega board - Power supply: servomotors require a fairly high current and for this purpose three power supplies are used for the robot: No. 1 x 5V / 3A power supply; No. 2 x 6V / 2.5A power supply. - Various tools: welder, dremel, drill, screwdrivers of different sizes and different tips, hexagonal keys; - Components: jumpers (for different board and user connections), male and female pin headers (for connecting the servers to the PCB), quadripolar switch (if using the three power supplies as in the project) / bipolar switch on desk stabilizer. This project can be used to lift objects and move them from one site to another ]]> 2017-07-16 10:52:38 UTC https://padlet.com/m_de18maria/nnjqpg1i0oel/wish/178785115