We are a tailoring company specializing in the production of office clothing. We are currently looking for dedicated people for the factory

PR manager

This job is responsible for creating and maintaining a favorable public image for their employers or clients by communicating programs and accomplishments

To be suitable for this job, you need to have graduated from a good university and have at least 2 years of experience in the profession.

You also need to have good knowledge of media and communication, and understand garment products. If you already have a foreign language certificate, that is an advantage

The salary for this position is about 15 - 25 million depending on your ability

If you feel suitable for this job, please register for an interview at our company

Garment 10 Corporation 

765A-Nguyen Van Linh-Sai Dong-Long Bien- Hanoi

Email: garco10@.gmail.com.vn

Subject: Price negotiation 

Dear Jame  ,

We thank you for shipping the polo shirts to us promptly. Nevertherless, this email is also to inform you that the price that you're charging for per shipment is not according to the market rate of the concerned packages.

We have some other suppliers who are willing to provide us the same articles on $4,5 for each. As we are purchasing the articles on $7 for each by you, so we are continuously in a loss of $2,5.

Well, we want to propose that please have a short meeting so that we could discuss the terms and conditions regarding the prices.

Thanks  for your concern. Please inform us of the meeting timetable as soon as possible.

Your sincerely ,

Hai Yen Do
HR Department
Hung Long Company.
23, Cau Dien Road,Bac Tu Liem, Hanoi
Phone: +123456789
Fax: +987654321

From:MOCD@gmail.com

Dear, Mr Yen

I am writing in response to your advertisement posed on Business Newspaper for Fashion designer position.

I hold a degree in garment technology at Hanoi university of Industry . I have completed the following courses China

My professional skills apper to be well suited to your company’s requirements

I have 3 years’experience in making knit top fashion and I worked at GaCo 10 for 2 years. As a Fashion designer position, I have accquired necessary skills such as office computer, fashion skills . In addition, I also understand fabric, trims, print placement, layout and I can fluently use Gerber software.

I enclose a cover letter with my references information

Thanking you most sincere for your time and consideration.

I have received the sample of the shirt order TBT 35 from the pattern maker. The sample looks good and similar to the sketch. However, some details need to be revised.

Firstly, the color of the pattern is scarlet but the specification is crimsons so the pattern maker has to work again with the supplier of fabric to order the right.

Secondly, the spec sheet requires a black label with white letters on it, but the actual one hasn't got a label, and have to add the label as required.

Next, the sample hasn't got leather piping to cover the lapel as required of the spec sheet so I suggest that you add leather piping to the lapel as required. with the button, the sample is missing the number of buttons compared to the specification sheet's requirement of 6 buttons and has to add 1 buttons with described spacing.

Next, the Sleeve length has to take the sleeve up 2" to correct the requirements of the spec sheet.

Finally, the waist of the sample is 5" smaller than required so take the waist out in 5". I have sent the comment back to the prototype development and hope that they will revise it soon to send our customer for approval

Firstly, the actual sample does not have the white letters on black label attached 1” below collar stand.

Secondly, the spec sheet requires that the neck width from highest point of the shoulder (HPS) to another HPS is 5 5/8” but in actual sample it is 8”. You need to take it in 2 2/3’’.  In the spec sheet, the pocket is on the left of garment with 6’’depth and 4’’width instead of on the right. Thirdly, the armhole-straight as required in the spec sheet is 8 3/8’’ long but in the actual sample, the length is 8’’. You need let it out 3/8''. In the spec sheet, the cuff opening is 4’’ instead of 6’’, so you need to let the cuff opening of the sample in 2’’

Next, the waist in the spec sheet is 15 1/2'' but it's actually 24’’ as I have measured on the sample, you need to take it in 8 1/2''.

Finally, the bottom opening in the spec sheet is 17'' but it's actually measured 25”, you need to take it in 8''.

I have given some comments on the prototype of the shirt and also some suggestions to revise it. I hope that you will soonly revise the sample and give us back on next day.

Firstly, the day the incident occurred is April 21^st, 2022. The name of injured employee is Ngo Thanh Trang. She has fracture of finger because she was pierced by the needle through her finger while sewing. When she met the accident, colleagues helped her turn off the sewing machine, first aid wounds and call medical staff. Then she was taken to the hospital for careful medical examination. After this accident, I think we should guide workers to use sewing machines more carefully to avoid serious accidents again.

In conclusion, I have talked about the accident record and the purpose is to help the manager know the cause of the accident and have solutions to ensure workers’ safety.