IND3603-2: TEKNIK PEMBUATAN MODEL REKA BENTUK PERINDUSTRIAN (INDUSTRIAL DESIGN MODEL MAKING TECHNIQUE) by Siti Mastura Md Ishak https://padlet.com/toramir711/n6xvgu3quyxrwhhb Online e-learning - VACUUM FORMING en-us 2020-05-07 21:49:36 UTC 2023-05-02 06:42:02 UTC hello@padlet.com Dr. Siti Mastura Md. Ishak & Dr. Saiful Hasley Ramli toramir711 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558616646 Hi Class, Its been awhile. ]]> 2020-05-07 21:54:31 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558616646 ReAD mE! toramir711 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558627095 1) Take a selfie  with your mom or anyone near you and upload your pic under the number label provided. 1 label = 7 person only.

3) On your picture:
  - Write down your name .
  - Write the location where you are.
for you attendance.

5) Then, look into the Pembelajaran Maya / Online Class:

i) Video 1 - Vacuum Forming Ep. 1 - Pengenalan /Introduction

i) Video 2 - Vacuum Forming Ep. 2
- Proses Vacuum Forming / Vacuum Forming Process

6) Based on the video, Visual Drawing & instruction given, please do your task individually.

7) Refer PutraBlast for submission.
]]> 2020-05-07 22:02:48 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558627095 Pravin Rao A/L Santheran pravin6127 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558933169 Kamunting, Perak

1)  because can be heated and made pliable, and once cooled is rigid again.
2) molecules are heated expand and start moving aggressively , hence why the material expand and become saggy 
3) because will be hard or impossible to remove from the mold without damage.]]> 2020-05-08 03:05:03 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558933169 MOHAMAD SYAMIL BIN MUHAMED BASIR TAIPING, PERAK https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558934124 2020-05-08 03:06:14 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558934124 nurulhudaahmadkamar https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558934984 NURUL HUDA BINTI AHMAD KAMAR
201863
RAWANG SELANGOR

1) can be heated and easy to use. 
2) the material heated because of the temperature, so it will be saggy once we heat it. 
3)it will be hard to pull it out from the mold. ]]> 2020-05-08 03:07:20 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558934984 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558935144 Intan Liyana Binti Bujang 204650 
Pasir Gudang, Johoooor

1. It is pliable when heated.
2. The heat make it moves easily and freely.
3. Going to damaged the outcome. ]]> 2020-05-08 03:07:34 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558935144 Miao ZhengWei 201371 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558936423 2020-05-08 03:09:16 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558936423 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558936532 muhammad aliff iqbal bin ramlan
klang, selangor

]]> 2020-05-08 03:09:24 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558936532 toramir711 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558936775 your opinion:
1) Why do you think rigid plastic book cover can be used as vaccum material?
2) Why the material get saggy when its heated?
3) why undercut on mould is not recommendable?]]> 2020-05-08 03:09:45 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558936775 toramir711 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558937885 hahaha....what happen to you? kena electric shot ke?

]]> 2020-05-08 03:11:11 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558937885 chualiang99 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558938143 Chua Wei Liang
201985
Kelantan
1)because rigid plastic book cover is pliable after heated and easy to be shape
2)because plastic is a polymer so it will get saggy when heated
3) it will spoil the product]]> 2020-05-08 03:11:32 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558938143 hi dear toramir711 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558938194 2020-05-08 03:11:36 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558938194 pravin6127 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558938309 what the liang]]> 2020-05-08 03:11:45 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558938309 fyra https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558938350 Siti Nur Syafira 
Kamunting, Perak

1) Because it's easy to bend
2) Heat transfer and the material will get saggy
3) Because an indection can prohibits the ejection of a part from a mold 

]]> 2020-05-08 03:11:49 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558938350 eh nampak tuyus la toramir711 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558938397 2020-05-08 03:11:52 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558938397 hai saundra toramir711 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558938617 2020-05-08 03:12:10 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558938617 mieraizzati2905 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558938802 Norsyamira izzati binti shaharul anuar
Gombak, Selangor cCC

1) Because plastic rigid book cover can easily be formed once heated and stay its shape once cooled.
2) The molecules of the material can move around and expand the original shape of the material.
3)  Hard to remove from the mold without creating any unnecessary damage.]]> 2020-05-08 03:12:23 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558938802 napa cebek tuuuuu toramir711 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558938899 ... haa.. da 
mandi lom semua ni]]> 2020-05-08 03:12:32 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558938899 Aminatul Adilah binti Amir Ihsan 201860 Cheras, Kuala Lumpur https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558939113
1) Rigid plastic book cover is pliable when heated.
2) Heat allows the polymer chains in the plastic to move freely.
3) It will damage the form of the mould.]]> 2020-05-08 03:12:51 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558939113 WAHIDA BINTI ZAKARIA https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558939145 TRONOH,PERAK
1) Because it is pliable when heated.
2) Because when it is heated the molecule will start actively expanding and moving active.
3)because this prevents the possibility for sink and warp.(without damage)


]]> 2020-05-08 03:12:54 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558939145 Hi miao! you look well...Hi Iqbal!! toramir711 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558939380 2020-05-08 03:13:12 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558939380 jovicjoseph https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558939947 Jovic haymanath a/l Harindranath 
Parit Buntar, Perak 

1.rigid plastic can be bend after we heat it.. 
2.the temperature expands it's surface and It becomes saggy 
3.  There will be scars on the surface of the material after getting it pulled out. ]]> 2020-05-08 03:13:57 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558939947 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558940021 Nurul Jannah Bt Yahya, salam ramadhan
1)rigid plastic pliable after heated nd easy to bend be shape
2)When temperature increase, the space between increased make the material saggy
3)the outcome will be bad nd damage]]> 2020-05-08 03:14:02 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558940021 I‘m fine mzw9909 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558940589 2020-05-08 03:14:48 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558940589 mushrifahmuskhazli https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558940881 Mushrifah Muskhazli
Bangi, Selangor
1) It can withstand high temperature that permits it to be stretched on a mold and cooled to a finished shape
2) The molecular motion is faster when it is heated as the space between atom increased which make the material become saggy
3) To prevent the finishing shape to be broken]]> 2020-05-08 03:15:10 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558940881 Wa lao wey...leng chai! toramir711 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558941253 2020-05-08 03:15:36 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558941253 Cheah Kar Jun 204054 karjun0916 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558942008 Ampang, Selangor

1. easy to bend and form shape when heated, and once cooled can be rigid again
2. molecules of materials will vibrate faster and the space between atoms will increase, then the material will get saggy due to high temperature.
3. hard to remove once the material mold]]> 2020-05-08 03:16:34 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558942008 LIM YONG WEI 204267sEREMBAN, nEGERI sEMBILAN mreglim https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558942052 1) pliable and easily to get
2) molecules inside expanded
3) its may  cause damage to the vf]]> 2020-05-08 03:16:37 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558942052 Muhammad Hafizuddin Bin Mohd Asri https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558942129 Lot 5985 Kg Sungai Soi, 25150 Kuantan, Pahang ]]> 2020-05-08 03:16:41 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558942129 fakhrul1520 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558942630 Muhammad Fakhrullah Bin Mohammad Hizal
Kuala Lumpur
1. Because it made pliable
2. Molecules inside the material expand when be heated and it become saggy.
3. Will damage the final outcome

]]> 2020-05-08 03:17:18 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558942630 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558944355 GAN CHENG ROU
201864
Tangkak , Johor
1)I think rigid plastic book cover not suitable because it was thin
2)because plastic will soften or metl when heating
3)because hard to ejected from the mold without damage]]> 2020-05-08 03:19:15 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558944355 ko siap bagi alamat lagi pis. https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558944508 2020-05-08 03:19:27 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558944508 amboi fira..wirid dhuha tak abis lg ke....doakan saya sekali toramir711 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558944662

]]> 2020-05-08 03:19:39 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558944662 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558944693 Nurul Nuha, Penang, Malaysia ]]> 2020-05-08 03:19:42 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558944693 pravin6127 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558945268 soo handsome waaa]]> 2020-05-08 03:20:28 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558945268 syazawafa https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558945527 nursyazawafaa binti mohamed safine
kamunting,perak

1)because the plastic cover can be heat easily and can be rigid again when it cooled
2)because the material is soft
3)because hard to remove from the mold without damage


]]> 2020-05-08 03:20:46 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558945527 Nurul Fatihah Binti Ismail fatihahismail226 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558945564 kedah


]]> 2020-05-08 03:20:49 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558945564 you must have 7 person in every level ya toramir711 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558945593 2020-05-08 03:20:51 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558945593 saundarya28 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558945865 Good morning dr....😊 ]]> 2020-05-08 03:21:11 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558945865 rbruohbingg1999 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558945967 LIOW RUOH BING 203369
SEMENYIH SELANGOR.

In my opinioI, I think that vaccum forming is the cost effective techniques because it use low pressure so only relatively low cost equipment and low pressure mean that mould can be made of inexpensive materials and in a short time. Well, it's an interesting topic today !]]> 2020-05-08 03:21:19 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558945967 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558946026 Mnetau ad nak hntar lauk]]> 2020-05-08 03:21:25 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558946026 tade plastik hitam nak hantar makanan https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558946270 2020-05-08 03:21:42 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558946270 zahidahraja https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558946802 Raja Zahidah bt Raja Kamaruzaman 
Bangi, Selangor
1) Rigid plastic book cover is pliable when heated
2) Plastic is a polymer which is when being heated, the bonds between the polymer will break and the molecules will slide to each other.  
3) It will damage the outcome ]]> 2020-05-08 03:22:20 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558946802 apis berapa lama tak pergi barber? haha toramir711 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558948409 2020-05-08 03:24:07 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558948409 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558948576 Polisterin jadi dah]]> 2020-05-08 03:24:14 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558948576 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558949238 Nak potong dgn member tp member takut kena covid hurmm]]> 2020-05-08 03:25:04 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558949238 nazrinaye109 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558949734 Muhammad Nazrin Bin Ramlan
Banting 

Sorry dr lambat. Solat dhuha tadi ]]> 2020-05-08 03:25:36 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558949734 takyah tipu la aye https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558949912 2020-05-08 03:25:50 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558949912 2042663 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558950542 Muhammad Aliff Haiqal bin Mohd Azran
Pekan Pahang]]> 2020-05-08 03:26:38 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558950542 kai guan..move to different label toramir711 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558951460 2020-05-08 03:27:41 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558951460 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558951923 hi magneto...nak nama melayu ye ..hehe]]> 2020-05-08 03:28:09 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558951923 Muhammad Musaddiq bin Mustapa https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558952418 Negeri sembilan

]]> 2020-05-08 03:28:45 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558952418 ye aye...sya PERCAYA ... toramir711 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558952680 2020-05-08 03:29:05 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558952680 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558952723 Pkai helmet level brp pun saddiq ttap knock awal]]> 2020-05-08 03:29:08 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558952723 Ariff Danial B. Ismail https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558953053 Kamunting, Perak]]> 2020-05-08 03:29:31 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558953053 Nur Haizatul Najiha bt Rahimi Haizatul https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558955424 Hutan Melintang, Perak
1) easy to bending 
2) because of the temperature and molecul in the material
3) once the material mold, it will be hard to remove]]> 2020-05-08 03:32:17 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558955424 toramir711 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558958718 2020-05-08 03:36:27 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558958718 toramir711 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558959150 2020-05-08 03:36:58 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558959150 NG KIAN PANG 204261 pang99th https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558959606 Melaka Tengah, Melaka.
1)because after the rigid plastic book cover is heated, it can bend easily and fit to any shape of the mold we make.

2) because high temperature make the molecule movement in the material faster and expand its surface in limited space, this is where the material become saggy.

3) there will be marks or scars on the material's surface after pull out]]> 2020-05-08 03:37:32 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558959606 Muhamad Fahmi Bin Harun 200669 fahmiharun2000 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558964212 Sungai Petani, Kedah]]> 2020-05-08 03:43:05 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558964212 ONG KAI GUAN TELUK INTAN , PERAK okaiguan https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558965092 1.）  it is an easily formed and machined, tough, low cost for thermoplastic with high impact .
2.) more heat , less sagg and heat exchangers the assembled units are heated either or it  immediately apparent that sagging in these materials  is not a simple thermally activated .
3.)  Design for injection molding  has clear rules: Add draft.no undercut . Round edges. Clear parting lines. Uniform walls,not
 too thick.]]> 2020-05-08 03:44:11 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558965092 sarasmorthy01 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558975772  Good Morning Dr
Sarasvathy Morthy 
Klang, Selangor
 1. Rigid plastics are easily formed and machined.
2. The higher the temperature, the more the chances for it to get saggy.
3. To prevent any damages on the mold,maybe.

]]> 2020-05-08 03:58:02 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558975772 saundarya28 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558976028 Saundarya a/p Saran 
Taiping,Perak
1.Rigid plastic is low cost with high impact strength 
2.because high temperature that make expansion increases the slack between transmission line structures on molecule movement,causing them to sag.
3.it will leave damage and scars on the surface 


]]> 2020-05-08 03:58:23 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558976028 Vinoodinee Vesunathan vinoodinee29 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558977544 Johor Bahru

1) Rigid plastic are taught and ideal for molding.
2) The shape of molecules expand when get heated.
3) Because its hard to remove from the mold]]> 2020-05-08 04:00:30 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558977544 farishaikal673 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558991164 Mohd faris haikal bin shahrin
201982
Kulai johor]]> 2020-05-08 04:19:33 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558991164 erqiangang https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558998364 Er Qian Gang
204263
Muar Johor]]> 2020-05-08 04:30:11 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/558998364 https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/559009409 awak berminat tak tawaran jadi model kurta]]> 2020-05-08 04:46:20 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/559009409 jovicjoseph https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/559035017 Selfie lagi ke??? 😂😂😂😅😅😅]]> 2020-05-08 05:22:35 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/559035017 Fatin Fatihah bt. Mohd Faizal https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/559050211 Rhu Renggeh, Terengganu.

1. Because it can be easily shaped (into what ever form necessary) with heat, then will maintain a fixed form when it cools down.

2. As the material gains heat, it gains energy, thus overcomes it's solid state and enters a solid-liquid state, and so becomes soggy.

3. To prevent kecacatan on the final product.]]> 2020-05-08 05:43:28 UTC https://padlet.com/toramir711/n6xvgu3quyxrwhhb/wish/559050211