HI 9-BURGUNDY! by Dannica Lila Delfin

Good Morning 9-Burgundy!

dannicaliladelfin1 — 2023-03-07 12:29:48 UTC

Don't forget to post your answers here. Please include your name before posting your answers. This will also serve as your attendance. Thank you! :)
-Ma'am Dannica

Magno, andrea mae

2023-03-08 02:52:36 UTC

The difficulties i encountered while making LAN cable are the struggles to make sure that the wires are totally straight so it can reach the end of the RJ45, also the struggles whenever i am already done but the cable is not working. But despite of all of that struggles, i also enjoyed making LAN cable, and i was so happy that i discovered another knowledge. That's all :)

Borbon Cyreffe Gerard R. IX-Burgundy

2023-03-08 02:55:30 UTC

The hardest part for me was putting the wires in the RJ45 Because some of the wires won't budge or go in the pins of the RJ45 and some of the wires snap and the wires are too much flimsy. And the second hardest part for me was the alignment of the wires because some of the wires are overlapping each other which cause to be harder to put inside the RJ45

(Hillary Gayle Metante - 9 burgundy) The difficulties I had while making LAN cable is ' how can I make this work in just one try? ' ang ' how can I straightened these wires and adjust their color - coding without pulling and breaking the wires? ' . It's indeed hard to make a LAN cable especially if you don't have any idea at all. I overcome them by the help of my friends and my teacher, they help me on how can I make the wires straight and how can I lock the wires in the RJ45. Fortunately, the cable works.

2023-03-08 02:56:08 UTC

Ruiz, Jolina P. (9-Burgundy)

2023-03-08 02:57:56 UTC

What I experienced in connecting the LAN cable was that it was easy with a bit of difficulty and at the same time the easiest thing I did when connecting the cable was the order of its color, the most difficult thing for me is locking the RJ45 on the wire because the locking is needed on the teeth of the RJ45 itself.

Pardillo, Elaiza Jane E.

2023-03-08 02:58:38 UTC

The difficulties I had when I was making a LAN cable is to make sure it is aligned perfectly in the RJ45 because the wire keeps twisting, I have overcome it by giving it at least patience while doing it so it can be done properly as it should be.

Alejandria, Isakh Cris

2023-03-08 03:01:56 UTC

There were so many hardships and difficulties I experienced during the activity in creating LAN, First the hassle of getting the materials needed for the LAN cable, MANY RJ45s were sacrificed during the process, Second the splicing of the small colorful wires that were needed to be perfectly aligned FOR THE LAN CABLE TO WORK to avoid multiple errors and retrying (which I had 5 attempts TvT) and lastly the wire being too loose, making random numbers to go off in the LAN Tester. To overcome this I took my time patiently and focused to get the right alignment and inorder for it to function properly.

San Felix, Sophia Gabrielle G.

2023-03-08 03:06:16 UTC

When creating a LAN cable the difficulties part for me is when i’m trying to straight the wires after i cut because every time i cut its not equal again,and it’s hard once you put the wires inside rj45 because its not becoming equal. But in the end i still manage to work it. I overcome them by asking a help to my tle teacher and also help by my group-mates.

Fernandez, Simone James C.

2023-03-08 03:16:57 UTC

The difficulties I had while making LAN cable is when I have to aligned perfectly the wires in RJ45. I have overcome it by gathering the necessary materials, arranging the wires, trimming the wires, crimping the connector, repeat like repeating the process for the other end of the cable and by testing the cable in the LAN tester and also patience

Escanilla, Ariana Mae A.

2023-03-08 03:19:16 UTC

There's so many difficulties for me of making a LAN cable first I don't know how to make that in the first place because it's my first time to encounter that kind of "ano". Also I need to make sure the wires are straight before I put it on the RJ45. It's very hard at first because I had a many trials before I made a LAN cable that works. I also get pressured because almost of my classmates had made a LAN cable and it works. But I really enjoyed making a LAN cable.^^
naubos pera ko dun ah<<<

Malawani, Aslia S. 9 burgundy

2023-03-08 03:28:28 UTC

I had experienced many difficulties while creating LAN. I kept buying rj45 and cutting my wire but there's always something WRONG, my patience already ran out day 1. The wires are not lining up, the colors are not in the right orders, the rj45 running out, and the wire just kept getting smaller and smaller. I don't even know how i still made it. Shocking.

Urbano, Elyssa Kate A.

2023-03-08 04:09:25 UTC

The most difficult part of making a LAN cable is straightening the wires to put them inside the RJ45 to ensure that it will work once I lock it, but it's definitely difficult. I had to buy more RJ45, cut my Ethernet wire, and rearrange the wire colors. One thing I learned while making a LAN cable is that you just have to be patient until it works.

Lozada, Lyndie Jane L.

2023-03-08 04:09:29 UTC

Making a LAN cable was a great experience for me. The most difficult part was getting the ends of the cable to fit properly. I had to make sure I was properly measuring the length of the cable and the ends of the cable, so it would fit the ports on my devices. To ensure a tight fit, I used a crimping tool to ensure a secure connection. I also made sure I followed the wiring diagram correctly, as this was important to make sure the cable functioned properly. After double checking all my measurements, I was able to easily make a secure and functioning LAN cable.

Ladores, Aira Marie C.

2023-03-08 04:35:27 UTC

Making a LAN cable can be a bit tricky, but with the right tools and techniques, it can be done easily. The first thing you need to do is gather all the necessary materials.Once you have all these materials, you can start making your LAN cable.
The most difficult part of making a LAN cable is may struggle with stripping the outer jacket of the Ethernet cable, and difficulty crimping the RJ45 connectors onto the cable. However, with practice and patience, these difficulties can be overcome. One tip is to make sure you have all the necessary tools and materials before starting, and to refer to a wiring diagram if you're unsure about the correct order of the wires. Additionally, if you're having trouble crimping the connectors onto the cable, try using a different crimping tool or adjusting your technique.

Macabuat, Mahar M.

2023-03-08 04:35:54 UTC

I enjoyed making a lan cable using rj45 but it's also annoying because the cost of rj45 is repeated when it's wrong, so sometimes I give up but in the end I got it working, I was very happy when it worked with the lan tester because after everything I'm sorry I can pass this test, what I learned from making a lan cable is don't rush and the wire must not be overlapped with the rj45, that's all thankyou!

Gabiola, Allen Josh R.

2023-03-08 05:28:56 UTC

The most difficult part of making LAN cable is the color coding when its inside in the RJ45, I thought that it's okay when I holding the perfect color coding but when I put it inside in the RJ45 the color coding are separated. And that's the only difficult I've experienced of making LAN cable.

Rega, Johaira, C.

2023-03-08 07:38:34 UTC

I enjoy making a LAN cable but the most difficult part of making LAN cable to me is the color - coding because you thought that the color conditioning would be one after the other when you put it on the RJ45, but what you did was not perfect color conditioning and that's the only difficult I've experienced of making LAN cable.