https://padlet.com/lehnetal000/m6l5jws0h5ipdjia Made with charm en-us 2021-03-30 13:16:17 UTC 2021-03-31 18:38:51 UTC hello@padlet.com lehnetal000 https://padlet.com/lehnetal000/m6l5jws0h5ipdjia/wish/1367899047 First you want to unbox your motherboard then your gonna unbox the CPU. once you get the CPU out you will see a little triangle at the bottom of the CPU and CPU motherboard slot (The motherboard CPU slot is at the top of the motherboard). Once you align those triangles you lift up the latch on the right of the slot Then put it in and close the slot. Then you will take your RAM sticks if you have two you will find the slot for the RAM on the upper right of the motherboard. Then you unlatch the latches on the top and bottom then you align the slit at the bottom of the RAM to the slot on the board (You have to put them in slots 2 and 4. if you have 4 pieces of RAM it does not matter what order you put it in (make sure you have the same exact RAM) then push it in. ]]> 2021-03-30 13:19:04 UTC https://padlet.com/lehnetal000/m6l5jws0h5ipdjia/wish/1367899047 lehnetal000 https://padlet.com/lehnetal000/m6l5jws0h5ipdjia/wish/1368317157 If you have a m.2 NVME drive or an external drive you want to research about that first if it’s and external drive skip this process but if you do this is just right for you. Once you unbox your NVME m.2 drive and you have it you’re going to want to get a small screw driver. the place you insert the m.2  is right above the GPU slot which we will go over later. So once you insert the m.2 into the slot it will be at a angle popping out you will push it down and screw it in with a small screw that came with the motherboard.]]> 2021-03-30 14:55:55 UTC https://padlet.com/lehnetal000/m6l5jws0h5ipdjia/wish/1368317157 gfellnol000 https://padlet.com/lehnetal000/m6l5jws0h5ipdjia/wish/1368332607 If you think about it, installing the motherboard is actually pretty easy. With the screws that your motherboard came with, put them into all the holes in the mother and then alight it with the case. Each case has different letters or symbols that represent each place for the screw if the case supports different size motherboards. After you align the motherboard in the case, screw the motherboard in and make sure the I.O ports on it are aligned with the ports on the case. ]]> 2021-03-30 14:59:28 UTC https://padlet.com/lehnetal000/m6l5jws0h5ipdjia/wish/1368332607 lehnetal000 https://padlet.com/lehnetal000/m6l5jws0h5ipdjia/wish/1371654499 Once you have your power supply you are going to want to get your screws and you will see at the bottom of you chasey/ PC case there is a hole for the power supply unit]]> 2021-03-31 13:11:28 UTC https://padlet.com/lehnetal000/m6l5jws0h5ipdjia/wish/1371654499 lehnetal000 https://padlet.com/lehnetal000/m6l5jws0h5ipdjia/wish/1372981080 just copy and paste it on google or safari.  https://youtu.be/OZaFqY8UF6I
He is one of my favorite youtubers i suggest him alot.]]> 2021-03-31 18:37:00 UTC https://padlet.com/lehnetal000/m6l5jws0h5ipdjia/wish/1372981080