DEE 2B - WEEK 8 - INDIVIDUAL PRACTICE (Door Mat) by FAIRUZ LIZA Shuhaimi https://padlet.com/fairuzliza/l474n3j8bqfdqraa Please share your answers here.. en-us 2021-04-19 04:12:56 UTC 2023-02-26 06:58:03 UTC hello@padlet.com https://padlet.net/icons/png/1f60a.png MUHAMMAD WAFIQ BIN ZAHARI (01DEE20F1043) https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431393919 First, the length and the width is measured of the coir. second, a large  piece of paper is used as a canvas. next, the preferred doormat shape on the paper is drawn by using a marker pen. Then, the coir is flipped over. After that, the paper template flat laid on top of coir. Subsequently, the design is tracked by using a permanent marker. Next, the design is cut along the lines. Than, a stencil out is cut from a piece of cardboard. After that, the stencil  placed on the surface of the new coir mat. Lastly, paint sprayed all over the stencil.

safety measures.
1. careful white using the cutter for avoid injuries.
2.use goggle to protect your eyes.
3.use a gloves to avoid our hand from paint.]]> 2021-04-19 04:26:28 UTC https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431393919 LOOI JIA HEE (01DEE20F1037) https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431397232 QUESTION 1
Firstly, the length and width of the coir are measured. Next, a large piece of paper is used as a canvas. Subsequently, the preferred doormat shape is drawn by using a marker pen. After that, the coir is flipped over. Afterward, the paper template flat laid on top of the coir. Then, the design is traced by using a permanent marker. Next, the design is cut along the lines. After that, a stencil out is cut from a piece of cardboard. Continue, the stencil is placed on the surface of the new coir mat. Finally, paint is sprayed all over the stencil.

QUESTION 2
1. Be careful while using scissors to avoid scratches.
2. When using the coir, be careful because it has a rough surface that might cause injury.
3.Wear a face mask while using spray to avoid the entrance of toxic chemical substances during inhalation.]]> 2021-04-19 04:28:14 UTC https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431397232 MUHAMMAD AZAMSYAABAN BIN MD HUSNI (01DEE20F1040) azamsyaabannn https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431399599 Firstly,the length and the width os measured of the coir.Secondly,the large piece of paper is used as a canvas.Thirdly,the preferred doormat shape on the paper is drawn by using a marker pen.Next,the coir flipped over.Then,the paper template flat is laid on top of coir.Subsequently,the design is traced by using a permanent marker.After that, the design is cut along the lines.Following that,a stencil out is cut from a piece of cardboard.Another,the stencil on the surface is placed of the new coir mat.At the end, the stencil is sprayed paint all over.

Three safety measures is:
1.Wear a mask to avoid the smell.
2.Wear a glove to avoid our hand from paint.
3.Be careful while using the cutter.]]> 2021-04-19 04:29:29 UTC https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431399599 01DEE20F1042 https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431403900 RAUDHAH BINTI ABDUL RAHIM 

]]> 2021-04-19 04:31:42 UTC https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431403900 MUHAMMAD KHAIRUL NIZAM BIN ABDUL MUBIN (01DEE20F1044) https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431403979 Firstly , the length and the width of the coir are measured  . Second , a large piece of paper is used as a canvas . Third , the preferred doormat shape is drawn on the paper by using a marker pen . Next , the coir is flipped over . Subsequently , the paper template flat is laid on the top of coir . then , the design is traced using a permanent marker . After that , the design is cut along the lines . Then , a stencil is cut out from a piece of cardboard . Next , the stencil is placed on the surface of the new coir mat . Finally , the stencil is sprayed paint all over .  

Three safety measure .

1.We must wear a mask to to prevent the smell of chemicals from the spray

2.we must wear a pair of gloves to prevent our hands from being sprayed

3.We must carefully using a cutter when cut the design

]]> 2021-04-19 04:31:43 UTC https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431403979 NURUL AIN BINTI SAID(01DEE20F1053) https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431405958 Firstly, the length and width of the coir are measured. Secondly, a large piece of paper is used as a canvas. Thirdly, the preferred doormat shape is drawn by using a marker pen. Next, the coir is flipped over. After that, the paper template flat laid on top of the coir. Later, the design is traced by using a permanent marker. Then, the design is cut along the lines. Following that, a stencil out is cut from a piece of cardboard. Subsequently, the stencil is placed on the surface of the new coir mat. Finally, paint is sprayed all over the stencil.

Safety measures:
1)Use face mask to avoid smell the chemical from the spray paint.
2)Use a cutter carefully to avoid scratches your finger.
3)Wear a glove to avoid the chemical from the spray paint get into your hand.]]> 2021-04-19 04:32:34 UTC https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431405958 MOHAMAD HAZIQ IKMAL BIN SAAD https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431407685 01DEE20F1048

First, the length and the width of chair are measured. Second, a large piece of paper is used as a canvas. Third, the preferred doormat shape is drawn on the paper by using a marker pen. After that, the coir is flipped over. Following that, the paper template flat is laid on top of coir. Then, the design is traced by using a permanent marker. Afterwards, the design is cut along the lines. Afterwards, a stencil is cut out from a piece of cardboard. And then, the stencil is placed on the surface of the new coir mat. At the end, the stencil is sprayed paint all over.

Safety Measures.
1. Use safety mask to avoid reduce chemical smells.
2. Wear a pair of gloves to prevent the paint spray on the hand.
3.Use the cutter carefully to avoid from any injuries.]]> 2021-04-19 04:33:33 UTC https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431407685 MUHAMMAD ALIF AMRY BIN ROSDI (01DEE20F1052) https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431412173 Firstly,the length and the width is measured of the coir. Secondly, a large piece of paper is used as a canvas.Next, the preferred doormat shape on the paper is drawn by using a marker pen.Then , the coir is flipped over.Next ,the paper template on top is lay of coir.Following that,the design is trased by using a permanent marker .Then , the design along is cut the line  .Subsequently,a stencil is cut out from a piece of cardboard.Next, the stencil is placed on the surface of the new coir mat.Finally, the spencil is sprayed paint all over .   


Three safety measures:
1.wear a mask for avoid chemical smell.
2.use cutter careful for avoid injuries.
3.Wear gloves while using cutter to prevent the cutter cut your hand.]]> 2021-04-19 04:35:45 UTC https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431412173 NURUL HAQIMAH BINTI AB.RAHMAN(01DEE20F1049) nurulhaqimah27 https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431412684 Firstly,the length and the width of the coir is measured.Secondly,a large piece of the paper is used as canvas.Next,the preferred doormat shape is drawn by using a marker pen.Then,the coir is flipped over.After that,the paper template flat laid on top of the coir.Afterward,the design is traced by using a permanent marker.Subsequently,the design i cut along the lines.Next,a stencil out is cut from a piece of cardboard.Then,the stencil is placed on the surface of the new coir mat.Lastly,the stencil is sprayed paint all over. SAFETY MEASURES: Handle the cutter carefully to avoid injuries. Wear a mask to avoid the odour of the chemical smells. Wear a pair of gloves to avoid the paint spilled on our hands.]]> 2021-04-19 04:35:59 UTC https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431412684 MUHAMAD IZZAT SYAFIQ BIN ISMAIL (01DEE20F1038) https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431413507 Question 1
Firstly, the lenght and the width of the coir are measured. Secondly,a large piece of paper is used as a canvas. Next, the preferred doormant shape on the paper is drawn by using a marker pen. Then, the coir is flipped over. After that, the paper template flat is laid on the top of coir. Subsequently, the design is traced by using a permanent marker. Afterwards, the design is cut along the lines. Following that, a stencil out is cut from a piece of cardboard. Next, the stencil is placed on the surface of the new coir mat. Finally, paint is sprayed all over the stencil.
Question 2
1) use scissors carefully when doing a cut to avoid injuries.
2) Wear a face mask while using spray to avoid contact with the face.
3) Wear a pair of glove to avoid the paint of spray hit on the hand]]> 2021-04-19 04:36:24 UTC https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431413507 THAYALAN NAIR A/L KUMARAN 01DEE19F1107 https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431414712 Firstly , the length and the width of the coir are measured  . Second , a large piece of paper is used as a canvas . Third , the preferred doormat shape is drawn on the paper by using a marker pen . Next , the coir is flipped over . Subsequently , the paper template flat is laid on the top of coir . then , the design is traced using a permanent marker . After that , the design is cut along the lines . Then , a stencil is cut out from a piece of cardboard . Next , the stencil is placed on the surface of the new coir mat . Finally , paint is sprayed all over the stencil . 
SAFETY MEASURES
1. Wear a mask to avoid smell.
2. Be careful when using sharp things.
3. Wear gloves to protect hands from paint.

]]> 2021-04-19 04:36:56 UTC https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431414712 https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431423349 MOHAMAD ALLIF BIN AZNAN
01DEE20F1054

Firstly, the length and the and the width of the coir are measured. Secondly, a large piece of paper is used as a canvas. Thirdly, the preferred doormat shape is drawn on the paper by using a marker pan. Following that, the coir is flipped over. After that, the paper template is laid on top of coir. Then, the design is traced by using a permanent marker. Next, the design is cut along the lines. Afterwards, a stencil is cut out from a piece of cardboard. Later, the stencil is placed on the surface of the new coir mat. Finally, the paint is sprayed all over the stencil. 

 Safety Measures 

1. Using the knife carefully to prevent the injuries.
 2. Make sure to wear the mask to avoid the chemicals from enter to our nose
 3. Wear the safety google to prevent the chemical spill from enter our eyes.

]]> 2021-04-19 04:41:17 UTC https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431423349 NUR AIN NATHRAH BT ABDUL KADIR https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431425621 01DEE20F1030]]> 2021-04-19 04:42:27 UTC https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431425621 Nor Fadslul Hakimi Bin Norzaidi (01DEE20F1028) fadslulhakimibinnorzaidi https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431426967 Making A Doormat

    Firstly, the length and the width of the coir are measured. Second, a large piece of paper is used As a canvas. Next, the preferred doormat shape on the paper is drawed by using a marker pen. Following that, the coir is fliped over. And then, the paper template flat is laid on top of coir. After that, the design is traced by using a permanent marker. Afterwards, the design is cut along the lines. Subsequently, a stencil is cut out from a piece of cardboard. Beside that, the stencil is placed on the surface of the new coir mat. Finally, the paint is sprayed all over the stencil. 

Safety measures
•you must wear the mask because the paint has a dangerous chemicals. 
•you must be careful when using the knives because the knives will make your fingers bleeding. 
•you must wearing a apron while using the paint to avoide our shirt get dirty. ]]> 2021-04-19 04:43:12 UTC https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431426967 MUHAMMAD NABIL BIN ZAIDI (01DEE20F1046) https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431427057 Firstly, the length and the width is measured of the coir . Secondly, the large piece of paper are  used as a canvas. Next, the preferred doormat shape on the paper is drawn by using a marker pen. Then, the coir is flipped over. After that, the paper template template flat laid on the top of the coir. Then, the design is traced by using a permenant marker. Later, the design is cutted along the lines. Subsequently, a stencil out is cut from a piece of cardboard. Next, the stencil is placed on the surface of the new coir mat. Finally, paint is sprayed all over the stencil.

3 SAFETY MEASURES 

1)Wearing a mask to protect the smellof the chemicals.
2)Wear a gloves to make sure the hands not have the chemical paint
3)Use the cutter careful to avoid the injuries 

]]> 2021-04-19 04:43:15 UTC https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431427057 NUR ELLIANA BINTI DASIMAN(01DEE20F1031) ellianadasiman https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431428795 Firstly, the length and the width of the coir is measured. Secondly, a large piece of paper is used as a canvas. Thirdly, the preferred doormat shape on the paper is drawn by using a marker pen. Next, the coir is flipped over. Then, the paper template flat is laid on the top of coir. After that, the design is traced by using a permanent  marker. Subsequently, the design is cut along the lines. Following that, a stencil is cut out from a piece of cardboard.Afterwards, the stencil is placed on the surface of the new coir mat. Lastly, the stencil is sprayed paint all over.

Safety measure:
1.Use cutter carefully from avoid injury
2.Wear mask when use spray to avoid smell
3.Wear gloves to prevent hand from paint]]> 2021-04-19 04:44:07 UTC https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431428795 SHAKTHISWAREN (01DEE19F1124) https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431429647 Firstly, the length and the width of the coir are measured. Secondly, a large piece of paper is used as a canvas. Next, a preferred doormat shape is drawn on the paper using a marker pen. Then, the coir is flipped over. The paper template flat is laid on top of the coir. Subsequently, the design is traced by using a permanent marker. Next, the design is cut along the lines. Then, a stencil is cut out from a piece of cardboard. Next, the stencil is placed on the surface of the new coir mat. Finally, the stencil is sprayed paint all over. ]]> 2021-04-19 04:44:31 UTC https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431429647 01DEE20F1045 godlikeffbe https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431430422 Lee Weixin]]> 2021-04-19 04:44:48 UTC https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431430422 https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431435909 AHMAD SOLAHUDDIN BIN ABDULLAH
01DEE20F1036]]> 2021-04-19 04:47:01 UTC https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431435909 https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431436610 NUR ATHIRAH BINTI MOHD SHUKRI 
01DEE20F1033

Firstly, the length and the width of the coir are measured. Then, a large piece of paper is used as a canvas. After that, the preferred doormat shape is drawn on the paper using a marker pen. Next, the coir is flipped over. Subsequently, the paper template flat laid on top of coir. Then, the design is traced by using a permanent marker. Following that, the design is cut along the lines. After that, a stencil is cut out from a piece of cardboard. Later, the stencil is placed on the surface of the new coir mat. Finally, the paint is sprayed all over the stencil.

Safety measures.
1)use the the cutter carefully tu avoid from injuries your hand.
2)wear mask to prevent the chemicals substance from entering your respiratory system.
3)wear gloves to prevent your hands from being exposed to paint.]]> 2021-04-19 04:47:12 UTC https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431436610 MUHAMMAD NAZMI BIN SAMSUL BAHRI https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431442245 01DEE20F1032
1.Firstly, the length and width of the coir is measured.
2.Secondly, a large piece of paper as a canvas is used.
3.Third, the preferred doormat shape is drawn on the paper by using marker pan.
4.Then, the coir is flipped over.
5.After that, the paper template flat is laid on top of coir.
6.Later, the design is traced by using a permanent marker.
7.Following that, the design is cut along the lines.
8.Then, a stencil is cut out from a piece of cardboard.
9.Subsequently,the stencil is placed on the surface of the new coir mat.
10.Finally the stencil is sprayed all over.

3 measures safety:
1)Use the cutter carefully to avoid from injuries hand.
2)keep spray only on the stencil to avoid from it getting in the eyes.
3)wear a mask to avoid inhale the air or gas coming from the spray paint.]]> 2021-04-19 04:48:43 UTC https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431442245 MUHAMMAD SUFI BIN ROSLI(01DEE20F1047) https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431451521 Firstly, the coil is measured in length and width. Next, a larged piece of the paper as canvas was used. Subsequently, by using marker pen draw the preferend doormat shape on the paper. After that, flip over the coir. Next, put the paper templet flat on the top of coir. Then, used a permanent marker to trace the design and cut the design along the lines. Next from a piecce from cardboard cut a stencil. Next om the surface of the new coir mat, plaxe the stencil. Lastly, on the stencil sprayed

Safety measured
1.Used safety glove to spray over the stencil.
2.Wear mask to avoid in haling chemical odors.
3.Wear safety glove to cut the stencil. 

]]> 2021-04-19 04:51:21 UTC https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431451521 MUHAMAD NABIL BIN MAT NOOR madnabil547 https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431458903 01DEE20F1051

]]> 2021-04-19 04:53:04 UTC https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431458903 Muhammad Dainial Haikal bin Shahrul Rizal 01DEE20F1050 https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431463395 Firstly,the length and width of coir are measured.Secondly, a large piece of paper is used as a canvas.Thirdly,the preferred doormat shape drawn by using a marker pen.Next,the coir is flipped over.Then,the paper template flat is laid on top of the coir.After that,the disign is traced by using a permanent marker.Subsequently,the design is cut along the lines.Following that,a stencil is cut out from a piece of cardboard.Meanwhile,the stencil is placed on the surface of the new coir mat.Lastly, the stencil is sprayed paint all over.

Safety Measure
1.Use a knife carefully to avoid the finger cut
2.Use face mask when use spray paint to avoid of chemical.
3.Use permanent marker carefully to avoid marker ink hit at hand because marker ink is hard to remove.]]> 2021-04-19 04:54:13 UTC https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431463395 MUHAMMAD MUZAKKIR BIN AZLAN (01DEE20F1039) https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431463799 Firstly, the length and the width of the coir are measured. Second , a large piece of paper is used as a canvas. Then , the preferred doormat shape is drawn on the paper by using a marker pen. Next, the coir is flipped over. After that, the paper template flat is laid on the top of coir. Later, the design is traced by using a permanent maker. Following that , the design is cut a long the lines .Afterward , a stencil is cut out from a piece of cardboard. Subsequently, the stencil is placed on the surface of the new coir mat . Finally, paint is sprayed all over the stencil.

 Safety Measures

i)we should wear mask when using spray to avoid chemicals from the spray.

ii)Be carefully when using a cutter to avoid injuries.

iii) we should wear an apron to avoid getting dirty from the spray. 

]]> 2021-04-19 04:54:26 UTC https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431463799 Firstly, the length and the width of the coir are measured. Secondly, a large piece of paper is used as a canvas. Next, the preferred doormat shape is drawn on the paper using a marker pen. Then, the coir is flipped over. After that, the paper template flat is laid on top of coir. Afterwards, the design is traced by using a permanent marker. Later, the design is cut along the lines. Following that, a stencil is cut out from a piece of cardboard. Next, the stencil is placed on the surface of the new coir mat. Finally, the stencil is sprayed all over the stencil. Safety Precaution i) Be careful when using sharp tool because it might cut out skin. ii) Wear mask or avoid smelling the spray because the spray might contain some harmful chemical. iii) tell people around us not to walk near us when using the spray. huikie2002 https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431469166 2021-04-19 04:56:57 UTC https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431469166 https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431469647 AL AMIN BIN ANOR IDRIS
(01DEE20F1034)
First,the length and width of coir is measured.Second,the large piece of paper is used as a canvas.Third,the preferred doormat shape is drawn on the paper using a marker pen.Then the coir is flipped over.Next the paper template flat is laid on top of coir.After that,the design is traced by a permanent marker.Subsequently,the design is cut along the lines.Then,a stencil out is cut from a piece of cardboard.Next,the stencil is placed on the surface of the new coir mat.Lastly, paint is sprayed al over the stencil.

Safety measures
1.Wear mask to avoid chemical odour from the spray.
2.Carefully when cut the stencils to avoid injuries.
3.Wear safety glass to protect eyes from paint.]]> 2021-04-19 04:57:09 UTC https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431469647 MUHAMMAD SYAFIQ BIN SAI-FULHAK 01DEE19F1129 https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431473448 Firstly, the length and the and the width of the coir are measured. Secondly, a large piece of paper is used as a canvas. Thirdly, the preferred doormat shape is drawn on the paper by using a marker pan. Following that, the coir is flipped over. After that, the paper template is laid on top of coir. Then, the design is traced by using a permanent marker. Next, the design is cut along the lines. Afterwards, a stencil is cut out from a piece of cardboard. Later, the stencil is placed on the surface of the new coir mat. Finally, the paint is sprayed all over the stencil. 

Safety Measure 

1. Using the knife carefully to prevent the injuries.

2) Wear a face mask while using spray to avoid contact with the face.

3)Use the cutter careful to avoid the injuries]]> 2021-04-19 04:58:58 UTC https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1431473448 PUAN ,SAYA TERDELETE YANG ADA SEQUENCE CONNECTOR TU ,SALAH DELETE https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1440786831 NI YANG BETUL ]]> 2021-04-21 02:40:49 UTC https://padlet.com/fairuzliza/l474n3j8bqfdqraa/wish/1440786831