TACK 004 by

Thanh Tùng

cuongtungyb — 2022-03-17 07:44:42 UTC

The first advantage of the cordless drill is that it is compact

Đăng Dương

nguyendangduong10102001 — 2022-03-17 07:46:28 UTC

The first advantage of the cordless drill is that it is lightweight
The second advantage of the cordless drill is that it is compact
The third advantage of the cordless drill is that it is impressive 3 year warranty
The first disadvantage of the cordless drill is that it is create annoying noise. The next disadvantage of the cordless drill is that it is limited use time

Nghiêm Anh Dũng

dunganh874 — 2022-03-17 07:51:14 UTC

There are many advantages of the cordless drill. The first advantage is compact.
- The second advantage is versatile and reliable.
- Another advantage of cordless drill is lightweight.
- The next advantage of cordless drill is high speed transmission.

Việt Thắng

thangviet773 — 2022-03-17 07:52:10 UTC

1St the cordless drill is lightweight beside that it is compact
2nd is impressive 3-year warranty highspeed transmission
high performance motor also
eye-catching and set up quickly is advs of it

Ngô Vi Dũng

ngovidung73 — 2022-03-17 07:52:12 UTC

The first advantage of cordless drill is versatile and realiable. It is also compact and lightweight. This drill has a positve point which have impressive 3-year warranty but its negative point is create annoying noise. what i like about this product is that high speed transmission and high performance motor. what I don't like about this product is that slip a little at high speed.
Another goog point is set up quickly and look eye-catching .

Vũ Hoàng Tâm

hoangtam032001 — 2022-03-17 07:52:36 UTC

-The first advantage of the cordless drill is that it is lightweight
- There are many advantages of the cordless drill and one of them is versatile and reliable.
-Another benefit is compact.
-Another advantage is eye-catching
Disadvantages :
- The first disadvantage of the cordless drill is limited control of speed
-There are many negative aspects and one
of them is create annyoying noise

tran van kien

kien18112001 — 2022-03-17 07:53:42 UTC

the first advantage of the cordless drill is that it is versatile and reliable
the second is lightweight
the third is high speed transmission
however, the first disadvantage of the cordless drill is that limited control of speed
the second is create annoying noise
after that is expensive price

Nguyễn Quang Huy

nguyenhuycr2001 — 2022-03-17 07:53:48 UTC

The first advantage of the cordless drill is that it is compact so it's lightweight. The second advantage is versatile and reliable. Besides it's high speed transmission, high performance motor. However it also has some disadvantages like limited control of speed, create annoying noise and expensive price.

Phạm Văn Duy

2022-03-17 07:54:15 UTC

There are many advantages of the cordless drill and one of them is compact.
What I like about this product is that is lightweight.
The first advantage of the cordless drill is that is versatile and reliable.
The second advantage of the cordless drill is that is high speed transmission.
The third advantage of the cordless drill is that is impressive 3-year warranty.
Another advantage of cordless drill is set up quickly.

Nhật

nhat2212a5dqh — 2022-03-17 07:54:18 UTC

The first advantage of cordless drill is that it is compact
This cordless drill has a positive point which is lightweigh
The second advantage of cordless drill is that it is versatile and reliable
The first good point of cordless drill is set up quickly
There are many advantages of cordless drill is eye catching

Đạt

hoangdat26032001 — 2022-03-17 07:54:21 UTC

The first advantage of the cordless drill is that it is set up quickly
The second advantage of the cordless drill is that it is eye-catching
The 3rd advantage of the cordless drill is that it is lightweigh
The 4th advantage of the cordless drill is that it is compact
Disadvantages :
- The first disadvantage of the cordless drill is limited control of speed
-There are many negative aspects and one
of them is create annyoying noise

Đỗ Văn Hòa

thanhthienvtm — 2022-03-17 07:54:43 UTC

The first advantage of the cordless drill is that it is compact. Secondly, It very lightweight too. Next, the third advantage of cordless drill is impressive 3-year warranty. But the cordless drill have got some disavadvantages. Firstly, The cordless drill create annoying noise. The second disavantage of drill is that it is limited use time.

Phạm Thắng

thangkkss — 2022-03-17 07:55:08 UTC

The first disadvantage of the cordless drill is that it is limited control of speed
The second disadvantage of the cordless drill is that it is create annoying noise
The next disadvantage of the cordless drill is that it is expensive price

Do Thuan Tien

dothuantiennp — 2022-03-17 07:55:15 UTC

The first advantage of the the cordless drill is that it is versatile and reliable.
The second advantage of the the cordless drill is that it is compact.
The third advantage of the the cordless drill is that it is lightweight.
The next advantage of the the cordless drill is that it is set up quickly.

Mạc Anh Tuấn

macanhtuanqt — 2022-03-17 07:55:20 UTC

The first advantage of the cordless drill is that it is high speed transmission.
The second advantage of the cordless drill is that it is high performance motor
Next advantage of the cordless drill is set up quickly.

Le Van An

2022-03-17 07:55:31 UTC

about advantage,the first advantage of the cordless drill is compact. the second advantage is versatile and reliable.Next, the good point of cordless drill is lightweight. Another advantage is high speed transmission.moreover, the cordless drill have impressive 3-year warranty.a huge pro is high performance motor. another advantage set up quickly. the finaly advantage of the cordless drill that it is eye-catching.

about disadvantage, the firts disadvantage is expensive pricce. the second disadvantage is limited control of speed. Another disadvantage is create annoying noise. The finally disadvantage is slip a little at high speed.

Ngô Xuân Toàn

xuantoan2k1 — 2022-03-17 07:56:07 UTC

Advantage:
The first advantage of the cordless drill is that it is versatile and reliable.
The second advantage of the cordless drill is that it is compact.
The third advantage of the cordless drill is that it is lightweight.
The fourth advantage of the cordless drill is that it is impressive 3-year warranty.
The fifth advantage of the cordless drill is that it is high speed transmission.
The sixth advantage of the cordless drill is that it is high performance motor.
The next advantage of the cordless drill is that it is eye-catching.
The finally advantage of the cordless drill is that it is set up quickly.

Disadvantage:
The first disadvantage of the cordless drill is that it is limited control of speed.
The second disadvantage of the cordless drill is that it is create annoying noise.
The next disadvantage of the cordless drill is that it is slip a little at high speed(chuck).
The finally disadvantage of the cordless drill is that it is expensive.

Nam

thanvannam20x1 — 2022-03-17 07:56:09 UTC

The first advantage of the cordless drill is that it is compact
The second advantage of the cordless drill is that it is set up quickly
The Third advantage of the cordless drill is that it is versatile and reliable
The next advantage of the cordless drill is that it is lightweight

DISADVANTAGE
The first disadvantage of the cordless drill is that it is expensive price
The second disadvantage of the cordless drill is that it is create annoying nosie
Another limitation advantage of the cordless drill is that it is slip a little at high speed

Lê Công Tuyền

2022-03-17 07:56:16 UTC

The first advantage of the cordless drill is it allow us to work in wet area. The second advantage, the cordless drill is much more easy to carry from places to places.

Duy Chung

nguyenduychung001 — 2022-03-17 07:59:20 UTC

The first advantage of the cordless drill is that it is compact
The second advantage of the cordless drill is that they are sersatile and relia ble
Another advantage of this machine is lightweight
Besides, some another advantages are impressive 3 year warranty, high performance motor, yes catching and set up quickly
The first disadvantage of the cordless drill is that it is limited control speed
Besides, one of disadvantages is create annoying noise

Lê Anh Phương

phuonghpkt24 — 2022-03-17 07:59:51 UTC

The first advantage of the cordless drill is that it is compact
The second advantage of the cordless drill is that it is lightweight
If advantage of the cordless drill is that it is impressive 3 year waraanty
Next advantage of the cordless drill is that it is versatile and reliable
Then advantage of the cordless drill is that it is high speed transmission

Đặng Văn Hóa

2022-03-17 08:00:13 UTC

The first advantage of the cordless drill is that it is lightweight.
The second advantage of it is compact.
Next, an advantage of the cordless drill is the high-speed transmission.
Besides, the disadvantage of the cordless is limited control of speed.
The next disadvantage of the cordless drill is that it is an expensive price.

Cao Xuân Quyết

caoq2001 — 2022-03-17 08:00:34 UTC

The first advantage of the cordless drill is that it is set up quickly
The second benefit of the cordless drill is that it is eye-catching
The 3rd advantage of the cordless drill is that it is lightweight
The 4th advantage of the cordless drill is that it is compact
Disadvantages :
- The first disadvantage of the cordless drill is limited control of speed
-There are many negative aspects and one
of them is create annoying noise

Ngô Anh Đức

ngoanhduc2001 — 2022-03-17 08:01:26 UTC

1. There are many advantages of the cordless drill and one of them is lightweight

2. The first benefit of the cordless drill is versatile and reliable.

3. The second advantages of the cordless drill is that it’s operate with high speed transmission.

4. And another good point of machine are set up quickly and it have 3-years warranty.

5. Beside , there are many disadvantages of it and on of them is expensive price

6. And another disadvantages of the cordless drill is that it create annoying noise and slip a little at high speed.

Đức Tịnh

DucTinh — 2022-03-17 08:01:53 UTC

The first advantage of the cordless drill is that it is compact.
The second advantage of it is impressive 3-year warranty
A huge pro of cordless drill is lightweight

Nguyễn Tiến Hòa

2022-03-17 08:04:33 UTC

The first advantage of the cordless drill is that it is lightweight
The second advantage of the cordless drill is that it is compact
Next, benefit is eye-catching
The finally advantage of the cordless drill is that it is high speed
The first disadvantage of the cordless drill is limited control of speed
There are many negative aspects and one
of them is create annoying noise

Đỗ Văn Hòa

bachtieuvu — 2022-03-24 07:32:47 UTC

chairperson, product, chair, minutes, interrupt, attendee, propose, secretary, submit, agenda

Đức

ngoanhduc2001 — 2022-03-24 07:32:47 UTC

chairperson
attendee
agenda
minutes
secretary
propose
interrupt
submit
chair
conduct

Hoang ANH

2022-03-24 07:33:11 UTC

chairperson
attendee
agenda
minutes
secretary
propose
interrupt
submit

Lê Văn An

ancovodoj2612 — 2022-03-24 07:33:25 UTC

Chairperson

Propose

Chair

Secretary

Attendee

Conduct

Interrupt

Agenda

Minutes

Submit

kien

kien18112001 — 2022-03-24 07:33:52 UTC

chair person
attendee
agenda
minutes
secretary
propose
interrupt
submit
conduct

Đăng Dương

nguyendangduong10102001 — 2022-03-24 07:33:54 UTC

Secretary
minutes
conduct
submit
chair
propose
agenda
attendee
interrupt
chairperson

Nguyễn Tiến Hòa

2022-03-24 07:34:17 UTC

1. chairperson
2.propose
3.chair
4.secretary
5.attendee
6.conduct
7.interrupt
8.agenda
9.minutes
10.submit

Ngô Vi Dũng

2022-03-24 07:34:19 UTC

chairperson
attendee
product
secretary
interrupt
agenda
minutes
propose
submit

Mạc Anh Tuấn

macanhtuanqt — 2022-03-24 07:34:23 UTC

Chairperson
Agenda
Attendee
Secretary
minutes
submit
interrupt

nam

thanvannam20x1 — 2022-03-24 07:34:28 UTC

chairperson
attendee
chair
propose
agenda
interrupt
minutes
conduct
submit

Đạt

hoangdat26032001 — 2022-03-24 07:34:32 UTC

propose
submit
conduct
chairperson
minutes
secretary
agenda
attendee

Duy Chung

nguyenduychung001 — 2022-03-24 07:35:12 UTC

chairperson
attendee
agenda
minutes
propose
interrupt
submit
chair
conduct
secretary

Nguyễn Ngọc Long

nguyenngoclongdl01 — 2022-03-24 07:35:29 UTC

conduct
Secretary
minutes
submit
chair
agenda
propose
attendee
interrupt
chairperson

Lê Anh Phương

phuonghpkt24 — 2022-03-24 07:35:41 UTC

chairperson
product
chair
minutes
interrupt
attendee
propose
secretary
submit
agenda

Đặng Văn Hóa

2022-03-24 07:35:46 UTC

chairperson
attendee
agenda
minutes
secretary
chair
propose
conduct
submit
interrupt

Trần Quang Nhật

nhat2212a5dqh — 2022-03-24 07:36:07 UTC

chairperson
Product
minutes
submit
conduct
chair
agenda
interrupt

Hoàng Tâm

hoangtam032001 — 2022-03-24 07:36:26 UTC

chairperson
interrupt
submit
chair
conduct
secretary
attendee
agenda
minutes
propose

Pham Thang

thangkkss — 2022-03-24 07:36:46 UTC

chairperson
secretary
progress report
attendee
chair
propose
agenda
interrupt
minutes

hà văn thành

2022-03-24 07:36:46 UTC

chair,chairperson,agenda,secretary,submit,attendee,conduct,propose

Phạm Văn Duy

2022-03-24 07:36:47 UTC

Agenda, Attendee , Submit , Chair, Secretary , Interrupt , Propose, Minutes, Chairperson , Product, Conduct

2022-03-24 07:36:52 UTC

product
attendee
submit
interrupt
agenda
minutes
secretary
propose

Nghiêm Anh Dũng

dunganh874 — 2022-03-24 07:36:53 UTC

1. agenda
2. chairperson
3. attendee
4. minutes
5. Secretary
6. propose
7. conduct
8. interrupt
9. submit
10. chair

Nguyễn Quang Huy

nguyenhuycr2001 — 2022-03-24 07:37:02 UTC

charperson, conduct, propose, attendee, minutes,secretary, submit, interrupt,

Xuân Quyết

caoq2001 — 2022-03-24 07:37:02 UTC

chairperson
product
propose
secretary
chair
minutes
interrupt
attendee
submit
agenda

Đức Tịnh

DucTinh — 2022-03-24 07:37:25 UTC

Chairperson
Attendee
Agenda
Minutes
Secretary
Propose
Conduct
Interrupt
Submit
chair

Do Thuan Tien

dothuantiennp — 2022-03-24 07:37:48 UTC

minutes
propose
submit
conduct
chairperson
attendee
chair

Ngô Xuân Toàn

xuantoan2k1 — 2022-03-24 07:37:54 UTC

agenda
secretary
chairperson
chair
minutes
committe
product
attendee
interrupt

Truong Duc Toan

tdt01062001 — 2022-03-24 07:39:07 UTC

chairperson
attendee
minutes
agenda
secretary
propose
conduct
chair
submit
interrupt

tran van kien

kien18112001 — 2022-03-28 09:02:13 UTC

my name is kien- an aprentice in samsung company. today, i am giong to make a report about the fault related to CNC machine. the model number is 2525. he has worked in our company for designer. the problem took place at 9.00 a.mon 15th may. an at workshop 3 .I am working on a CNC-2525 machine and it is not getting the desired result, while working, the shaft of 1 of the machines broke and it broke so I couldn't finish the job. I believe that the cause of this accident is that the essential equipment of the workshop has not been well maintained, has not been upgraded, leading to damage, . I suggest that the company should maintain all equipment in the workshop regularly to create a safe working environment for employees while they are working. Thanks for reading my report.

Lê Văn An

2022-03-28 09:03:03 UTC

my name is An, i am a engineer in Toyota company. To day I am going to make report about the fault related to mill in my workshop. the model number is 1234. This mill has worked in our company for 2 years. the problem took place at 9 p.m on 30th February at my workshop.when i creating product, this mill is burnt. i think the main cause that the mill has been working for too long. it works from 8 a.m to 9p.m, so it is too hot.i suggest our company should buy some mill to reduce the working time of a machine.

Cao Xuân Quyết

caoq2001 — 2022-03-28 09:03:59 UTC

My name is Quyet - an apprentice in Samsung company. Today, I am going to make a report about an incident I witnessed at our workplace last week. Peter, who is 27 years old, is the injured party. He has worked in our company for a welding engineer in welding shop. The event occurred at Workshop1 at about 8.30 a.m. on December 20th. When He was welding Suddenly, he was unable to open his eyes, his eyes hurt, and his left hand got burn as well. After investigation, I determined that he neglected safety rules and forgot to wear a proper welding helmet and a pair of welding gloves. To prevent similar occurrences, I propose that our company should create a company handbook listing out all safety rules related to welding in the workplace.

Nguyễn Tiến Hòa

2022-03-28 09:04:54 UTC

My name 's Hoa. I'm 21 years old. I am an apprentice employee in SamSung Company. Today, I'm going to do a CNC machine error report. Module number is CNC-87. at 5pm on March 28 at workshop 1, I was working on CNC-87 and it didn't get the result I wanted, while I was working, one of the workshop propellers fell on the machine. CNC and having it broken resulted in me not being able to get the job done. I think the cause of this accident is that the essential equipment of the workshop is too old and has not been upgraded, which leads to damage and drops. I suggest that the company should maintain all equipment in the workshop regularly to create a safe working environment for employees while they are working. Thanks for reading my report.

Ngô Vi Dũng

2022-03-28 09:08:31 UTC

My name is Ngo Vi Dung ,i am an apprentice in SS company. I am going to make a report about the fault related to CNC machine . The model number is 12345. This is a new CNC machine. He has worked in our company for 2 weeks. The problem took place at 2 pm on 20th March and at number 2 workshop . After an initial investigation, I discovered that the main cause is the workpiece is loose. To prevent similar occurrences, i suggest our company should reminds worker to tigh the workpiece

Nghiêm Anh Dũng

dunganh874 — 2022-03-28 09:09:19 UTC

My name is Dung, I belong to the equipment department of vinfast company. Today, the worker encountered an error related to drilling. The model number is DR265. yesterday March 27, at 2pm someone used this machine and had a problem. The problem here is that the machine is not working. he informed me about the problem. Through testing, the cause of the machine not working is due to a power failure. so I took it to the nearest repair shop for repair. I will send the repair invoice to the company

Do Van Hoa

2022-03-28 09:09:59 UTC

My name is Hoa- an apprentice in SamSung company. To day, i'm going to make a report about the fault related to CNC machine. The model number is 3018 . He has worked in out company for assemble worker. The problem took place at 8:30 am on march 28th and at assembly workshop. After an initial investigation, I discovered that it happened because the workpiece is loose. To prevent similar occurrences, i suggest our company should reminds worker to tigh the workpiece

Nguyễn Duy Chung

nguyenduychung001 — 2022-03-28 09:10:40 UTC

My name is Chung - an apprentice in Samsung company. Today, I am going to make a report about the fault related to CNC machine. The model number is 132456GJ. He has worked in our company for designer. The problem took place at 8.00 a.m on 28th March and at workshop. When i am creating product, suddenly this machine don't opertate. I think the main cause that the machine has been working for too long. After investigation, I determined that the system cooler was broken so I had to stop the machine and fix the problem. I think next time I have to check before operating the machine to avoid unexpected problems

Vũ Hoàng Tâm

hoangtam032001 — 2022-03-28 09:10:49 UTC

My name 's Tam. I'm 21 years old. I am an apprentice employee in SamSung Company. Today, I'm going to do a CNC machine error report. Module number is CNC-87. at 7am on March 20 at workshop 1, I was working on CNC-87 and it didn't get the result I wanted, while I was working, one of the workshop propellers fell on the machine. CNC and having it broken resulted in me not being able to get the job done. I think the cause of this accident is that the essential equipment of the workshop is too old and has not been upgraded, which leads to damage and drops. I suggest that the company should maintain all equipment in the workshop regularly to create a safe working environment for employees while they are working. Thanks for reading my report.

Nguyễn Quang Huy

nguyenhuycr2001 — 2022-03-28 09:13:08 UTC

My name is Huy - an apprentice in Samsung Company. Today, I am going to make a report about the fault related to CNC machine. The model number is 41.This is He has worked in our company for 3 years. The problem took place at 9:45 A.M on 12th december and at welding shop, the details are position control error, Axis digital servo system error. .After an initial investigation, I discovered that the reason is that the system has been damaged, the power supply is not suitable. To prevent similar occurrences, I suggest our company should carefully check the power supply, check for electrical leakage.

Nguyễn Ngọc Long

nguyenngoclongdl01 — 2022-03-28 09:14:04 UTC

My name is Long- an appretice in SamSung Company. Today. I am going to make a report about the fault related to CNC machine. The model number is L0006. This is Linh. She has worker in our company for 3 months. The problem took place at 4.00 pm on 28th March and at the number 5 workshop. while she was working, the machine caught fire and broke down. The reason is that the cnc machine has been operating for too long and has not been maintained. I think the company should maintain the machine regularly to make the machine work at its best to avoid damage to people and objects.

Ngô Xuân Toàn

xuantoan2k1 — 2022-03-28 09:14:07 UTC

My name is Toan-an apprentice in Samsung Company. Today ,I am going to make a report about the fault related to CNC machine.The model number is C-123.This is tool place at 10 a.m on March 20th and at workshop 2. While the machine is operating normally, the machine speed naturally slows down .After an initial investigation, I discovered that the engine has run out of oil. Resulting in reduced speed.If the machine continues to run, it may be damaged. To prevent similar occurrences ,I suggest our company should clean the machine regularly and oil more often to avoid machine damage.

Đặng Văn Hóa

daitrieuphuhoahuong — 2022-03-28 09:15:11 UTC

My name's Hoa. I'm 21 years old. I am an apprentice employee in Samsung Company. Today, I'm going to do a CNC machine error report. Module number is CNC-13. at 1:31 pm on March 13 at workshop 3, I was working on CNC-13 and it didn't get the result I wanted, while I was working, a Leaking cool water tank leads to inefficient operation of the machine. CNC and having it broken resulted in me not being able to get the job done. I think the cause of this accident is that the essential equipment of the workshop is too old and has not been upgraded, which leads to damage and leakage. I suggest that the company should maintain all equipment in the workshop regularly to create a safe working environment for employees while they are working. Thanks for reading my report.

Do Thuan Tien

dothuantiennp — 2022-03-28 09:15:13 UTC

My name is Tien. I am an apprentice in SamSung company. Today, i am going to make a report about the fault related to CNC machine. The model number is 111. While i was using the CNC machine to work, the machine suddenly stopped and can't restart. The problem place at 8a.m on 20th december and at workshop 3. After an initial in vestigation, i discovered that the cause was the engine running out of fuel. To prevent similar occurrences, i suggest our company should store a lot of fuel in the workshops.

Nguyễn Đăng Dương

nguyendangduong10102001 — 2022-03-28 09:15:36 UTC

I'm Duong. I'm 21 years old. I am an employee in LG Display company. Today, I'm going to do a CNC machine error report. Module number is CNC-20-A. at 6pm on April 22 at workshop 5, I was working on CNC-20-A and it didn't get the result I wanted, while I was working, one of the workshop propellers fell on the machine. CNC and having it broken resulted in me not being able to get the job done. I think the cause of this accident is that the essential equipment of the workshop is too old and has not been upgraded. I suggest that the company should maintain all equipment in the workshop regularly to create a safe working environment for employees while they are working. Thanks for reading my report and I'm waiting for your reply

Trương Đức Toản

tdt01062001 — 2022-03-28 09:16:00 UTC

My name is Toan, I am an engineer of Samsung company. Today I will report a fault related to the lathe in my workshop. number is 0106. This workshop has been built and worked at our company for 5 years. the problem happened at 8am on 11th July at my workshop. When the worker was creating the product, the lathe suddenly stopped working. I think the main cause is the old power line. I suggest the company should regularly check the power line

Nam

thanvannam20x1 — 2022-03-28 09:16:23 UTC

my name is Nam- an apprentice in samsung company . today i am going to make a report about the fault relted to cnc manchine. the model number is 14. He has wored in our compamny for 3 weeks. the problem took place at 1.15 pm, on 27th march and at number 1 workshop. while machining a workpiece for a client it was a number problem. So, broke 5 knives and damaged the workpiece. After an intial investigaltion, i discovered that cnc machine is too old and working frequency is too great. To prevent similar occcurrences.i suggest our company repair the problem of cnc machine. if possible buy cnc machine new or reduce the working frequency

Nguyễn Đức Tịnh

DucTinh — 2022-03-28 09:17:17 UTC

My name 's Tinh. I'm 21 years old. I am an apprentice employee in SamSung Company. Today, I'm going to do a CNC machine error report. Module number is ABC. at 3.30 pm on December 28 at workshop 1, The defective detail is spinder,it can't rotate. After an initial investigation, I discovered that the cause may be due to the user suddenly turning off the power of the cnc machine, causing the inverter to fail. To prevent similar occurrences, i suggest our company should turn off the CNC machine completely and wait until the inverter clock is completely off, then start and continue using the machine

Ngô Anh Đức

ngoanhduc2001 — 2022-03-28 09:18:01 UTC

My name is Duc – an apprentice in Samsung company. Today, I’m going to make a report about the fault related to CNC machine. The model number is 1. This is the problem when the worker is operating the CNC machine. The CNC has worked in our company for 10 months. The problem took place at 10.00 a.m on 15 December at workshop 5. During the worker was operating the CNC machine, there was a problem with the workpiece. It was so big and hard then the blade was broken. After that, the machine was short-circuited and damaged. After an initial investigation, I discovered that he neglected read guide of CNC. I suggest the company should buy a big CNC machine to be able to cut large workpieces.

Ha Nguyen Hoang Anh

2022-03-28 09:19:42 UTC

At approximately 7:30 a.m. on December 27, 2022, machine from several companies were exposed to an electrical arc flash and fire that occurred while Able Engineering was servicing a General Electric oil-filled contact (OFC) switch. The incident took place in the electrical room of a high-rise office building located in downtown Thai Nguyen. A machine for Able Engineering was damage and suffered breakdown. To prevent similar occurrences, i suggest our company should carefully working on the machine.

Lê Anh Phương

phuonghpkt24 — 2022-03-28 09:19:53 UTC

My name is Phuong-an aprentice in samsung company. today, i am giong to make a report about the fault related to CNC machine.The model number is 2222.This is tool place at 8 a.m on March 20th and at workshop 3. While the machine is operating normally, the machine speed naturally slows down .After an initial investigation.I discovered that the engine has run out of oil. Resulting in reduced speed.In order to avoid this situation from happening again and again, affecting the life of the machine, I have suggested the company to change the oil regularly and periodically maintain the machinery.

Phạm Văn Duy

2022-03-28 09:21:37 UTC

Writing:
Hi, my name is Duy – an apprentice in Hi, my name is Duy – an apprentice in Samsung Company. Today, I am going to make a report about the fault related to CNC machine. The model number is SS68. That CNC machine operator is Peter and he is 27 years old. He has worked in our company for 3 months. The incident took place at 8.30 a.m on December 20 at number 1 workshop.
During he was operating the CNC machine, there was a problem with the CNC machine. That CNC machine has a motor problem. The machine's motor stops working while machining the workpiece. He informed me about the problem.
I discovered that he neglected safety rules. He didn’t clean machine and maintenance that machine after work.
I see, it is compulsory to conduct a training course on uses rules before assigning them any job.
And I suggest that the company should maintain all equipment in the workshop regularly to create a safe working environment for employees while they are working. Thanks for reading my report.

hà văn thành

2022-03-28 09:21:45 UTC

my name is thành- an aprentice in samsung company. today, i am going to make a report about the fault related to CNC machine. the model number is 055. he has worked in our company for designer. The problem took place at 3 pm on 25th March and at number 1 workshop . After an initial investigation, I discovered that the main cause is the workpiece is loose. To prevent similar occurrences, i suggest our company should remind worker to tigh the workpiece.

Phạm Văn Thắng

thangkkss — 2022-03-28 09:24:42 UTC

My name is Thang -an apprentice in Samsung Company. Today, I am going to make a report about the fault related to CNC machine. The model number is 3425. It has worked in our company for 4 years. The problem took place at 8 a.m on 18th May at my workshop,when I am working,the machine speed naturally slows down .After an initial investigation, I discovered that the machine is low on oil. To prevent similar occurrences ,I suggest our company should Sufficient oil supply to the machines.

Mạc Anh Tuấn

macanhtuanqt — 2022-03-28 09:44:06 UTC

My name is Tuan, I am an engineer of Samsung company. Today I will report a fault related to the lathe in my workshop. Machine number is T101. This machine has been installed and used for 3 years. The problem happened at 10am on 28th March at my workshop. While we were working, the machine suddenly stopped and won't restart. I think the main reason is that a certain part has been broken. I suggest the company management should call the maintenance staff to check and replace.