https://padlet.com/kubaroni10/ifpmpxz2qe1w en-us 2017-01-13 09:20:35 UTC 2017-01-13 10:21:48 UTC hello@padlet.com kubaroni10 https://padlet.com/kubaroni10/ifpmpxz2qe1w/wish/146986898 How do you float a wall?
1.Aplly the scrach on the right corner ,laing  four trowel withs apart and in lenghts of 300mm long.Thre plaster should then be flatened using the trowel at a shallow angle to help spread the material .The applied scratch coat need to be about 10mm thick.Working downards and across,follow the same prodecture unil ou have  applied an area of 1m.Apply the scratch coat to the rest of the wall and key it,using the same prodecture .Once the wall has been plastered ,check it surface  with a straight edge.Fil any hollows or remove excessive thickness,preparing the surface to receive the next layer.Next is one coat the bottom right corner and do the same prodecure as before than do the left corner than across after roll in and than level it after do the bottom bit and roll it in than fill in the middle than roll it in level it after make sure its 12mm.After that you sponge float ]]> 2017-01-13 09:28:13 UTC https://padlet.com/kubaroni10/ifpmpxz2qe1w/wish/146986898