Attendance for Week 3 by Wan Fahmin Faiz bin Wan Ali FKM

Wan

wan_fahmin — 2018-02-24 08:23:15 UTC

Please write a summary of the today's topic.

Summary(Hisyamuddin Hanif Bin Ahmad)

2018-02-25 11:15:28 UTC

Have learn about the visual inspection and watching all types of NDT inspection are applied on the real situations.

Muhammad Izzuddin bin Abd Raub

2018-02-25 11:20:20 UTC

Learn about the visual inspection in details and learn about application of various testing from the videos.

Muhammad bin Ab Rahman

2018-02-25 13:07:03 UTC

The visual inspection is one of the Non-destructive test. Visual inspection is the act of inspect the probability of failure might happen, and we can only observe not verify. Verify the defect using other method.

Muhamad Asyraaf bin Baharudin

2018-02-25 14:00:36 UTC

The first step to testing is visual inspection that not need any certificate.

Mohamad firdaus bin rosman

2018-02-25 14:02:00 UTC

There are a few type of ndt/nde such as visual inspection, dye penetrant and using magnetic particles. Visual inspection is the most simple method to be use. The example of visual inspection is inspection of surface defect such as undercuts or cracks.

WONG POH YEE

2018-02-27 01:51:32 UTC

In last class, the objectives of NDT have been told. One of the objective is establish reliability and there are factors influence the reliability of NDT like human factor, test factor, risk factor and so on.
About the NDT method, Visual inspection was explained. The application of visual inspection involved in weld inspection, metrology, etch inspection and more. Tools or equipment needed in visual inspection depend on the size of samples.

AHMAD AMIRUL ASHRAF - Visual inspection is one of the simple techniques in NDT which use less preparation sample and less equipment such as magnifying glass, or even only by naked eyes. However it is limited on the surface only

2018-02-27 01:53:02 UTC

Qhairul Aidil Bin Zizan

qhairulpain — 2018-02-27 03:18:54 UTC

On last classes, the methods of NDT that i have learnt is visual inspection which the basic method to detect defect on surface component. There are many tools use in visual inspection. No certificate is needed.

Bukhari bin Abdullah

2018-02-27 04:44:16 UTC

Learn about the types of non destructive testing. One of them is visual inspection which is the simplest method that can be used.

Mohd Nor Fazdli Bin Ruslan

2018-02-27 04:53:57 UTC

Learn about one of the NDT method which is visual inspection. Visual inspection is the simple techniques used in NDT and a less sample preparation is used. Common equipment uses in visual inspection is magnifying glass.

Chan Jin Quan

2018-02-27 05:14:42 UTC

Visual inspection, used in maintenance of facilities, mean inspection of equipment and structures using either or all of raw human senses such as vision, hearing, touch and smell and/or any non-specialized inspection equipment.

Nor Asmaa' bt Zahari

2018-02-27 09:31:56 UTC

NDT visual inspection is all about conducting inspection for NDT visually. Few visual aids are used in visual inspection to identify defects that occur mostly on the surface of the inspected components.

Nor Asmaa' bt Zahari

2018-02-27 09:36:10 UTC

Visual inspection is all about conducting NDT visually. Few visual aids are used in order to identify the defects that likely to occur on the surface of the component. Visual inspection is the very basic step in conducting NDT

Siti Amirah Binti Zulkifli

2018-02-27 12:45:52 UTC

Visual inspection is the most common in NDT technique and inspect a variety of product forms including castings, forgings, machined components and weld elements, according to the NDT to ensure the quality of the product.

MUHAMMAD SHAHMI AFIQ BIN RUMLI

shahmisahc — 2018-02-27 15:07:29 UTC

Visual inspection is the simplest method of NDT. Many defects are surface-breaking and can be detected by careful direct visual inspection. This method can be carried out with or without optical aids. Optical aids include low-power magnifiers, microscopes, telescopes and also specialised devices such as boroscopes, endoscopes and other fibre-optic devices used for the inspection of restricted access areas.

MOHAMAD FAIZIE BIN ABDULLAH

2018-02-28 07:33:19 UTC

visual inspection (VI) is the simplest testing for NDT that direct detect by eyes. VI is the oldest and most common non destructive testing techniques. It is typically the first step in the examination process to inspect a variety of product forms including castings, forgings, machined components and weld elements.

Nurul Iman Nordin

2018-02-28 12:22:19 UTC

There are various methods of NDT; 1)Visual Inspection (VI); 2)Liquid Penetrant Inspection (LPI); 3)Magnetic Penetrant Inspection (MPI); 4)Eddy Current Inspection (EC); 5)Ultrasonic Inspection (UT); 6)Radiography (RAD)
For Visual Inspection, it involves the observation and inspection of surface defect or any possible damage and failure. There are some basic tool used in this inspection such as magnifying glass, fibrescope, borescope,etc. and it is applicable in many applications. (e.g. metrology&etch inspection)