cooler2014/3E2/Grp7 by Syed Aliff

Designing a Cooler for Ice-cream

misteraliff — 2014-04-20 14:35:29 UTC

difficulties / problems faced in designing and making the cooler

misteraliff — 2014-04-20 14:35:42 UTC

How do you overcome it?

Suggest any improvement in your design so that the cooler is able to keep the ice cream from melting for a longer period of time

misteraliff — 2014-04-20 14:36:00 UTC

misteraliff — 2014-04-20 14:47:29 UTC

mdm sunarti's slides

misteraliff — 2014-04-20 15:12:54 UTC

activity instructions

misteraliff — 2014-04-20 15:13:06 UTC

AMALLIA :D

2014-04-21 03:24:09 UTC

We faced many challenges during the making of the cooler such as trying to figure out which materials were suitable for the cooler. We had to refer to our notes most of the time to fully understand and come up with exactly how to create it.
Other than the materials used, we also had to come out with how the icecream cooler had to look like we ended up throwing materials around the container and made our cooler look like a pillow.

FELICIA:)

2014-04-21 03:24:32 UTC

> We faced many challenges and problems when we were trying to make the cooler. We tried our best to find the most suitable materials to make the cooler so that there is lesser emission of radiation from the cooler. When we were making our cooler, we referred to our notes on heat transfer and also the diagram of a vacuum flask.

> I believe that although our cooler were not the best, we can improve when we see other groups' design and change our design to make ours even better. Through the lesson, we showed teamwork when making the design.

> I feel that the lesson is very interesting and I hope that there are more lessons like this nest time. The lesson is super fun and we laughed a lot.

Rabbani ;)

2014-04-21 03:25:22 UTC

We faced problems when we were doing the ice cooler . We trying to find the suitable surface for the ice cooler . We must find the suitable material so that our ice cream will be cooled for longer period of time .

Cheryl :D

2014-04-21 03:25:36 UTC

We faced difficulties such as unable to find the suitable materials to build the cooler. We referred to our notes based on heat and radiation and we managed to come up with the suitable materials to build our cooler.

zadehhhbh

2014-04-21 03:30:34 UTC

HAI:)

Rabbani ;)

2014-04-21 03:31:42 UTC

We can refer into the notes that Mdm Sunarti gave to us . it give our group better idea about how the improve the ice cream cooler . We can use our Science knowledge e.g absorber and emitters of radiation to find the suitable material for the surface of the ice cream cooler . we also work and discuss together with our group . ok

2014-04-21 03:32:41 UTC

AMALLIAAAA :D

2014-04-21 03:33:16 UTC

We can learn from other groups on how they figure out how to create the cooler. By doing so, we will be able to learn what we weren't aware of and know exactly what we should imrpove on.

Cheryl :D

2014-04-21 03:40:18 UTC

We can learn from other groups or research on which materials are suitable to build the cooler in order to improve in our designs

Comments on the Lesson (Amallia)

2014-04-21 03:42:30 UTC

It was a very fun experience because we can learn about science and at the same time, relate it to our daily life. I like icecreams so it was nice to know how it is cooled in icecream trucks.

RABBANI

2014-04-21 03:42:38 UTC

THE LESSON IS FUN OMG

:D

2014-04-21 03:42:45 UTC

Cheryl :D

2014-04-21 03:43:30 UTC

The lesson is fun and interesting :D