Competency 12 Panel Furniture by Brendan Griffin https://padlet.com/bgriffin45/bp3d11jdyiiavn1b TV Stand en-us 2023-05-01 18:40:52 UTC 2026-03-05 04:23:23 UTC hello@padlet.com https://padlet.net/icons/png/1f5a5.png Secure Stock bgriffin45 https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2574106477 2023-05-01 18:53:12 UTC https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2574106477 Cut panels on vertical panel saw https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2576730440
  • Rip oversized components. 
  • Cross Cut inside gables oversized
    • ]]>     2023-05-03 13:13:46 UTC https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2576730440     Mill the oak for the hardwood edge https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2576754982 Prepare project components and x2 60" pieces for the exam.]]> 2023-05-03 13:30:36 UTC https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2576754982 Cross cut components using the horizontal sliding panel saw https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2576761029 Layout and cross cut:
    1. gable
    2. top
    3. gable flow
    4. bottom
    ]]>     2023-05-03 13:34:30 UTC https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2576761029     Laminate the hardwood edge https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2576771935 Laminate Oak edge onto: 
    • Top
    • Bottom
    • Gables
    NOTE: use bar clamps and cauls
    ]]>     2023-05-03 13:41:58 UTC https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2576771935     Prepare the materials and equipment https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2576938927 A.
    Measure the Gables inside the miters and record the information on the plan.

    B.
    -Retrieve the inside gables.
    -Note the original edge and grain direction.
    -Review the assembly checklist for machining.
    -Review the plan for edge banding.

    C.
    Shape the inside Gables:
    -Rip the components
    -Groove
    -Crosscut

    D.
    Apply the edge banding.
    (Tip: Use the Bench vise to hold your work upright; you can work ergonomically and use both hands).
    E.
    -Layout the position of the inside Gables according to the plan.
    -Machine the joinery with the Festool.

    F.
    -Layout the magic wire location.
    -Machine the holes on the drill press.

    G.
    -Layout the location of adjustable shelving.
    Prepare the Materials and equipment.
    -Test the machining for proper depth and location of the shelf pin holes.
    -Machine the Shelf pin holes.

    H.
    Sand the components.

    Inspect the piece of furniture.]]>     2023-05-03 15:34:45 UTC https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2576938927     Measure cavities https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577017187 Measure the 3 inner cavities’ widths. Should be: 18 9/16” for floating shelves, 19 3/8” for middle shelf. The widths of the cavities become the lengths of the shelves, so adjust final cut length as necessary to fit real cavity. NB: final length of floating shelves should be a hair under real cavity width so that they can be easily adjusted. ]]> 2023-05-03 16:34:44 UTC https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577017187 Secure stock and layout cuts https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577021214 2023-05-03 16:37:59 UTC https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577021214 Rips to final width https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577022123 Rip floating shelves to final width. Rip middle shelf to final width. Table saw?]]> 2023-05-03 16:38:40 UTC https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577022123 Crosscuts to final length https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577022843 Square off one end of each of the 3 shelves. Cross cut the floating shelves to final length. Cross cut middle shelf to final length. Table saw? Crosscut sled? ]]> 2023-05-03 16:39:09 UTC https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577022843 FLOATING SHELVES: Run magic wire grooves https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577023397 Table saw, regular kerf]]> 2023-05-03 16:39:35 UTC https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577023397 Iron on edging https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577029768 Trim the excess with a file. 
    Sand.]]>     2023-05-03 16:44:16 UTC https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577029768     A-False back https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577030446
    -Measure the width and height of the false back. 
    -Shape the false back and test the fit. 
    -Interpret the plan. 
    -Machine the grommet hole on the drill press]]>     2023-05-03 16:44:46 UTC https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577030446     C-The back https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577049001 -Take the measurements for the back
    -Shape the panel
    -Rip, Crosscut the Back
    -Countersink the Back
    -Attach the Back with 1 1/4" screws

    ]]>     2023-05-03 16:59:14 UTC https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577049001     B-Assembly https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577050022  
    -Dry assemble the carcass with tape, cauls and clamps.
    -Inspect the piece of furniture. 
    -Glue together the carcass

    making furniture
    ]]>     2023-05-03 17:00:00 UTC https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577050022     Install the shelves https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577056069 4 magic wires for floating shelves
    Biscuits for middle shelf]]>     2023-05-03 17:04:32 UTC https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577056069     D-The feet https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577057711 -Choose the feet
    -Attach the feet with screws]]>     2023-05-03 17:05:52 UTC https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577057711     E-Interpret the plan and lay out the grommet positions https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577061441 Use a plunge router and jig to machine the four Grommet holes
    Insert the Grommet]]>     2023-05-03 17:08:43 UTC https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577061441     Prepare the pieces for all 4 sides of the drawer https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577068412 - Prepare 2 pieces of 5/8 veneered panel over 48" 
    - Prepare one 1/4 panel for the bottom
    - Rip the width to 4"
    - edge band one good edge
    - Trim and sans the edge

    ]]>     2023-05-03 17:14:15 UTC https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577068412     Interpret the plan https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577072711 -Machine the groove on both pieces 
    -Rip the groove off one piece to create the front and back]]>     2023-05-03 17:17:41 UTC https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577072711     Crosscuts https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577078054 - Crosscut the sides SKL
    - Crosscut the front and back LW]]>     2023-05-03 17:21:50 UTC https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577078054     Drawer assembly https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577082120 - use the Festool to machine domino joinery
    - dry assemble and cut bottom to fit
    - assemble the dominos with glue
    - attach the bottom with screws
    - Machine the adjustment hole on the back of the drawer
    - sans the outside of the drawer]]>     2023-05-03 17:24:57 UTC https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577082120     Install the hardware https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577085714 - install the locking device under the drawer
    - install the runner in the opening
    - install the tip on Blumotion unit and latch
    - install the synchronization adapter
    - cut the linkage rod to size
    - install the linkage rod

    ]]>     2023-05-03 17:27:41 UTC https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577085714     install the drawer https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577087117 Test the tip of the drawer system ]]> 2023-05-03 17:28:40 UTC https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577087117 Jigs https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577162951 1. Flush Jig (shaping the profile)
    2. Table Saw Jig (45-degree mitres)]]>     2023-05-03 18:29:19 UTC https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577162951     Machining https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577169566 1. Ripping veneered panels (Table Saw)
    2. Rebate (Table Saw)
    3. Cutting mitres on veneered panels (Table Saw)

    ]]>     2023-05-03 18:34:35 UTC https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577169566     Procedure: https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577176398 1. Finish shaping the Top, Bottom, and Gables:
    - use the FLUSH JIG on the TABLE SAW to Flush the oak edge to the panel

    2. Cut the PROFILE on the oak edge

    3. Rip the Top, Bottom, and Gables to size

    4. Machine the REBATE on the TABLE SAW

    5. Cross Cut the Gables to size

    6. Cut the MITRES on the Table Saw with the TABLE SAW JIG

    7. Dry Assembly

    8. Pre-finishing and Inspection
    - Carefully use Orbital Sander on veneered surface
    - Scrape and sand the solid wood and veneer joint
    - Use a sanding block on oak edges and profiles
    - Use sanding block to break corners on veneered panels
    - Inspect components for scratches and defects]]>     2023-05-03 18:40:17 UTC https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2577176398     I. DONE FOR THE DAY!!! https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2578986277 2023-05-05 01:35:31 UTC https://padlet.com/bgriffin45/bp3d11jdyiiavn1b/wish/2578986277