https://padlet.com/alybon2485/bmw67wnvrrww Made with serendipity en-us 2018-03-05 13:38:55 UTC 2018-03-12 13:09:57 UTC hello@padlet.com alybon2485 https://padlet.com/alybon2485/bmw67wnvrrww/wish/238063828 How it's made
Parts
How it works]]> 2018-03-05 13:43:56 UTC https://padlet.com/alybon2485/bmw67wnvrrww/wish/238063828 alybon2485 https://padlet.com/alybon2485/bmw67wnvrrww/wish/238066598 to increase polarity to cause spinning]]> 2018-03-05 13:48:58 UTC https://padlet.com/alybon2485/bmw67wnvrrww/wish/238066598 alybon2485 https://padlet.com/alybon2485/bmw67wnvrrww/wish/238066643 The magnets create a pull as well as the 2 copper strips when the battery is in and the wires are on the strips, creating 2 separate pulles that cause it to spin]]> 2018-03-05 13:49:02 UTC https://padlet.com/alybon2485/bmw67wnvrrww/wish/238066643 alybon2485 https://padlet.com/alybon2485/bmw67wnvrrww/wish/238066713 armature: coil of copper, its the object that spins
commutator: 2 bend copper poles, parallel and hold armature]]> 2018-03-05 13:49:09 UTC https://padlet.com/alybon2485/bmw67wnvrrww/wish/238066713 alybon2485 https://padlet.com/alybon2485/bmw67wnvrrww/wish/238066863 Step 1: Grab wire and cylindrical block.
Step 2: Wrap wire carefully around block into a tight coil with two medium length ends out and sand the ends (one fully, one only on the top)
Step 3: Wrap medium ends into loop after taking loop off, leave two smaller ends after loop
Step 4: Take two small copper wires and bend the tops into small circles
Step 5: put copper coils into small wood block with two holes
Step 6: put coil with sanded bits into copper circles 
Step 7: Glue battery pack onto wood block
Step 8: Place battery into pack
Step 9: Take red and black wire and wrap silver bits around the two copper wires
Step 10: place two magnets onto each other and glue below coil 
Step 11: spin coil and watch]]> 2018-03-05 13:49:27 UTC https://padlet.com/alybon2485/bmw67wnvrrww/wish/238066863