請練習上述英文句子，並錄製後，上傳音檔。

請留下你的班級姓名或英文名。

請先用手機錄製音檔後，按左側【+新增評論】，選擇【上傳】音檔，送出(按右邊紅色箭頭)；或直接用【錄音機】功能錄製、上傳。

可以「分段」錄音上傳!

1. Prepare Materials – Get paper, a printed design, a badge cover, and a badge pin.

2. Cut the Design – Use scissors to cut the design to the right size.

3. Place in the Machine – Put the design, badge cover, and metal base in the badge machine.

4. Press the Handle – Push down the handle firmly to seal the badge.

5. Attach the Pin – Place the pin on the back and press it in place.

6. Check Your Badge – Make sure everything is tight and secure.

Now, your badge is ready! 🎉

（如何製作徽章）

Step 1
Put the metal badge base in the left mold.
（把金屬徽章底座放進左邊的模具）

Step 2
Place your printed picture and a plastic film on top.
（放上你的圖片，再加上透明膠片）

Step 3
Pull down the handle to press.
（把手把往下壓）

Step 4
Turn the mold to the right side.
（把模具轉到右邊）

Step 5
Put the pin back in the right mold.
（放上有別針的背蓋）

Step 6
Press the handle again.
（再壓一次手把）

Done! 🎉
Take out your finished badge!
（完成了！把徽章拿出來）

Host: "Here is your challenge card."

Challenger: "Thank you!"

Host: "You're welcome. Have fun!"

Challenger: "Okay! Can I choose any two?"

Host: "Yes! After passing two challenges, you can get a prize."

Challenger: "Great! Thank you!"

Challenger: "Got it!"

Host: "Good luck!"

Challenger: "Thanks!"

• Step 1: Put the front plate in.

• Step 2: Put the picture on top.

• Step 3: Put the plastic film on top.

• Step 4: Slide mold to center.

• Step 5: Press handle down and up.

Right Mold (Mold-B)

• Step 6: Put the pin back in.

• Step 7: Zigzag side faces up.

• Step 8: Slide mold to center.

• Step 9: Press handle fully.

• Step 10: Take out your badge!