To re-use my plastic bottles,

I took a plastic bottle to 

the hull, then to the mat,

I used spades skewers. 

Sails, I put leaves 

colored in black with a

skull.

My little neighbor helped me.

To re-use my plastic bottles,

I used a pastic bottle to

the fuselage. I made two

holes on the sides of the

bottle and then insert the

cardboard wings and I

stuck steering with adhesive 

tape. I took corks to

make turbojets.

My two little neighbor helped me.

I took several plastic bottles, 

I cut them in two to put in it of the ground then a plant.

at first to re-use my bottle, I cut a gap in a little bottle.After I sticked six paws, I draw two eyes and a sticked antennas. for finish

I put the sponge into the gap and

here is !

To re-use my bottle, i cut off two bottom of plastic bottle

-the first bottom is a bottom of milk bottle. I have cut it so as the hole take the form of the second bottom.

-the second bottom is a bottom of water bottle, and i cut it at the vertical.

I have made two hole in the two bottom, for insert the charging cable

I have finished by the lines with a black marker.

At first, I have cut off the bottom of two water bottle.

I have made the same hole in the two bottle. For insert a bottle in the other, I have cut a line at the first bottle, insert it in the second, and aligned the two hole.

At the end, I have drawn with a marker the black lines

For open or close de box, you just need to rotate the bottles and its make misalignment or alignment with the holes.

To re-use my bottle, I cut the bottle and 

I kept the botton of my bottle.

I add sand into my support and I put 

my candle on this.

After, I cut a notch so as to the water could flow outside the bottle.

To re-used my plastics bottles, I just have

scotched 2 bottles in my back

by the label.

The 2 bottles are attached on me by their label.

Here, the function of the label is to make same utility than braces. I would have liked more for this invention...

To re-use my plastic bottles , I took some rods across plastics bottles for birds if they want land . I put some seed in plastic bottles . The object hang up with a a rope on a tree

To re-use my bottles, I cut the top and 

the bottom of my first bottle that I scotched

on the second turned-around bottle.

finaly I stick three little wing.

it's a plastic bottle in which i drilled some short gap.

we digged then a gap in the earth in the middle of plants in which we put a plastic bottle.

next, we stuffed a bottle with a water, and a plants were sprayed directly they roots.

To re-use my plastic bottle, I cut two bottles in three parts.And I assembled the neck of the bottle and the buttom of the bottle, I have drilled five holes on the top and I linked the two bottle by the top after stuffed one of the bottle with salt.

To re use my plastic bottle, I cut one bottles in three parts, I keept the longest part and the buttom, I assembled the two parts then I have drilled many holes for inserted the encens sticks.

They are a candlestick.

I started by cutting the bottom of the bottle.

Then, I cut as a function of the ridges so that it makes five petals. Then, with the help of flame I melted the plastic for give original form.

To finish, I did the same with the top of the bottle to form a flower bud.

I started by cutting the bottom of the bottle.

Then I made the notches for give a style. And I melted the notches with the help of flame for give a appearance more corrugated.

To finish with remained the bottle, I made a bracelet.

I cut four small curved pieces and I melted the sides.

Then I added three pearls silvered.

To Re-use my plastic bottle i cut two parallel pairs of holes and I sliped spatulas in this holes. After I filled the bottle to bird food.

I made a bird feeder with a plastic bottle.

To re-use my plastic bottle, I cut holes the size of my remote and I stuck four milk bottle screw top to give a car appearance.

To re-use my bottle, i cut my bottle, i reversed the top of bottle and clipped it on the bottom.

I filled it with water+sugar and made 2 hole to hang

This is recycling rainwater, to re-use my plastics bottle, I took two plastic bottle.

I make a hole to put the spout plastic for the rain falls in the bottle.

With this water we can watering plants

This is a dehumidifier

To re-use my bottle, i cut my bottle, i reversed the top of bottle and clipped it on the bottom.

I applied a cloth on the wall of the top of bottle and put salt

I make a opening on the top of the bottle to put the candy and i make a hole on the bottom of the bottle to take the candy.

I put a little of paint in the paper plate, took the bottle and I soaked up it in the paint.

to re-use my plastic bottles ,i cut the top of the bottle,and remove the label.

with a twine i linked together the bottles for finish i put.

my magazine in the rack.

i cut the top of the bottle

i remove the label.

put some flower on my vase,

some water .

i have a vase easy to do when friends bring

flowers.

I had made a wallet / kit with two corners of bottles I had left.

I then pasted the fermuture at both ends and that was it!

Bye !

I took a plastic bottle that I cut in two parts then I cut several small strips to make the tentacles of the octopus.

To make the head, I used a small plastic bowl on which I stuck two eyes and drew a mouth.

At first I took a plastic bottle that I stuffed the bottom with blue stones.

I cut every other ridges of the bottle

for did a CD's compartment and for finished, I put CD's in craks.

at first to re-use my bottle, I cut a gap in a little bottle.

After I sticked six paws, I draw two eyes and a sticked antennas. 

For finish I put the sponge into the gap and here is ! 

To re-use my plastic bottles, i drew eyes and stuck this 

on the bottle. For legs i cut a cork and i put a cork in the

hole. I have cut above the bottle for did a hale.

My Grandfather helped me.

This is a cannon

to re-use my plastic bottles, i cut a wheel

in the cardboard, i have connected 2 wheels

wiht a rod.

With wire i connected a cardboard slab with

bottle. And i connected all with wire.

I have put a weight on the back of the 

connon.

My Grandfather helped me.

This is a airplane.

To re-use my plastic bottles,

I used a pastic bottle to make

the fuselage. I made two

holes on the sides of the

bottle and then inserted the

cardboard wings and I

stuck steering with adhesive 

tape. I took corks to

make turbojets.

My two little neighbor helped me.

To re-use my plastic bottles,

I took a plastic bottle to 

the hull, then to the mat,

I used spades skewers. 

I made holes with spades skewers

Sails, I put leaves 

colored in black with a

skull.

My little neighbor helped me.