My harmonious padlet by Erum Arif - 14988/TCHR/BRSTG

Circuit!

2024-10-10 05:40:26 UTC

If the switch will be off,the whole circuit won't work because the flow of electricity will be broken .

If the positive and negative terminals are attached to the different sides or not to the ones it should b attached so then,we can draw the diagram by changing the sides of cell/battery.

2024-10-10 05:41:13 UTC

When there are different components in a circuit like lamps, if we put two batteries and connect them with the lamp so it will be very bright.

science

2024-10-10 05:42:44 UTC

i observed that if we attach both batteries with on bulb then the brightness will be greater and if we attach both bulbs with both batteries then the brightness will be equally distributed.Only if we attach one bulb with one battery then the brightness will be normal and equally distributed

Circuit

2024-10-10 05:46:12 UTC

I observed that if we attach both batteries with both bulbs the brightness will be equal , and if we attach one bulb with two batteries the brightness will be greater .

If we attach one bulb and one battery , then the brightness will be less .

science

anabiya6847 — 2024-10-10 05:46:57 UTC

positive and negative do not have to be attached to each other they can be connected in diffrent ways

Increased Voltage: The total voltage of the circuit is the sum of the voltages of the individual batteries. For example, if you have two 1.5V batteries in series, the total voltage will be 3V.

2024-10-10 05:47:03 UTC

Same Current: The same current flows through both batteries in a series circuit. The overall current is determined by the total resistance in the circuit.

Battery Lifespan: If both batteries are of the same type and capacity, they will discharge at the same rate. However, if one battery has a lower charge or is older, it can limit the performance and lifespan of the entire series.

Compatibility: It’s important that the batteries used in series are of the same type and capacity to ensure they operate safely and effectively

The Brightness of the bulb!

2024-10-10 05:48:03 UTC

If we will attach two batteries with one bulb,the brightness of the bulb will be double or be more brighter.

If we will attach two bulbs with one battery the brightness of the bulb will be dimmer.

Notes

2024-10-10 05:48:14 UTC

notes

mahveen2902 — 2024-10-10 05:48:36 UTC

mahveen

mahveen2902 — 2024-10-10 05:48:50 UTC

circuits

2024-10-10 05:49:27 UTC

we learned that the more battery we add to the circuit , the brighter the bulb is . the addition of battery can effect the brightness of the bulb. If positive and negative terminal is connected to the wrong side the bulb will not light up. It depends on the amount of the battery

circuits!! Durre Adan & Aleena

al33n4 — 2024-10-10 05:49:59 UTC

When there is only 1 AA battery there is a normal amount of energy/brightness in the light but when there are 2 batteries the bulb becomes way more brighter and becomes more shiny.the circuit requires all the components to be attached together properly or else even if a tiny part is not joined properly or broken,the circuit will not work..

2024-10-10 05:50:52 UTC

If we add more wires in a switch it will light up more or it will be more brighter

circuit

2024-10-10 05:51:01 UTC

there are two types of circuit :

series circuit and parrrell circuit

if we will change the position of wires the electric current will move in opposite direction

a electric circuit contains a battery, a switch and a bulb

when I conect different component with bulb or more then one bulb like one bulb and two battery It work it is bright if the one component is no work mean whole circuit will not work FarihaAli

2024-10-10 05:52:15 UTC

Electricity

2024-10-10 05:53:02 UTC

If we increase the number of batteries the brightness of the bulb would increase, and there would be more flow of electricity in the circuit.If we have 1 batteries and 1 lamp the brightness would be the same if there would be 2 lamps and 3 batteries the brightness would increase.

CIRCUIT

2024-10-10 05:53:02 UTC

If the circuit is incomplete so the circuit will not work. For example; if there is no battery no wire or no bulb.

If we will place two batteries with one bulb ,the brightness of the bulb will be more or double.

If we will place two bulbs with one battery the bulb's brightness will get dimmer.

2024-10-10 05:54:30 UTC

There are two types of material;

conductors:

conductors conduct electricity like copper.

insulators:

they don't conduct electricity we can take example of rubber

there are also two types of circuit:

series circuit;

it have only one loop/path

parallel circuit;

it means if one goes off rest wont goes off only one

circuits

2024-10-10 05:54:53 UTC

Science

2024-10-10 05:55:57 UTC

I observed that if we join more wire and battery , then the brightness of bulb would increase and if the battery would be less then the brightness of the bulb would decrease . The same current would flow in both the batteries in the series circuit. If any of the component won't work in a circuit then the whole circuit won't work. Even if the battery is low charged or not working . The all components should be attached properly , even if small part is not joined properly , then the whole circuit will not work.

mahveen2902 — 2024-10-10 05:56:35 UTC

I observed that the the bigger line in the diagram shows the positive integer and smaller line show negative integer

circuit

2024-10-10 05:58:42 UTC

When we attached two wires and when we attach a bulb and a battery with it , it will start working.

Circuit : Fatima Ghufran

2024-10-10 05:59:29 UTC

I have observed that the battery or cell helps the bulb to light . When there is one battery so there is less amount of brightness and if there is two batteries so the amount of brightness will be more than the other one.

circuit

2024-10-10 05:59:57 UTC

If I connect the different component like one bulb and two battery and some wire it works bright and if one component will not work then whole circuit will not work

Series circuit

2024-10-10 06:00:07 UTC

I observed that when i connect the circut with one battery have light less. but when i connect the circuit with 2 battery so the light became more highter.

2024-10-10 06:00:49 UTC

we have to add wire into batteries it switch on and it is so interesting