https://padlet.com/ermtelematics/7l6r3g75hhqv Made with charisma en-us 2017-05-11 07:17:18 UTC 2017-05-11 07:25:37 UTC hello@padlet.com ermtelematics https://padlet.com/ermtelematics/7l6r3g75hhqv/wish/171174827 An overheating in a car is one of the major issues that you should never take lightly. Heating of car is sensed by the coolant temperature sensor that is located near to the engine thermostat. This sensor allows engine to function with balanced temperature. As here, the sensor works by measuring the temperature released by the thermostat. Now, this temperature is further sent to the on-board control system. After this, you find the alert that whether you should keep using or you need to adjust the functioning of the engine so that you could maintain the ideal level of temperature for engine.

The car temperature sensor always makes you alert for overheating problem. And, when you apply tracking devices for a vehicles, the sensor is also applied to keep alert for heating. However, if you find overheating issue and your sensor not working properly, you can go through the steps as shown below.

Steps to deal with car heating issues

•First, check for leaks

Here, you need to check the car coolant problems such as antifreeze pooling underneath the car or drips. If it is dripping, coolant reservoirs may be at lower levels or coolant may be gathered with the hoses edges. If you find hoses clamp loose, you should tight it. Here, you should keep in mind that hoses clamp is not over tightened, otherwise it can be cracked and you may need to replace.

•Check fans and radiators

Fan depends on the temperature sensor car, as it starts running when temperature goes up so that temperature could be balanced. Any way, if your fan is continuously not working while you are driving, you should immediately move to technicians. Here, you also need to check radiator for malfunction or leakage. Thus, check the radiator cup pressure at automotive store and make sure that there is no leakage around the radiator and hoses are fixed properly. Here, you can also ask to apply monitoring tracking devices for vehicles to have more alert and easy fixes for car engine issues.

•Check the pump for water

Here, you should check that whether any damage or defects are there in the water pump or not. If you are not able to find it, you can ask your nearest technicians to locate the water pump. If you find it, wait until the engine is cooled properly. Now, check for the weep hole in the bottom of water pump. If you find the bottom dump, you instant need to replace the pump.

These above are the common troubleshooting tips that you can apply to get rid of the temperature sensor car issues. However, if you need more help, you can reach the technicians who can immediately resolve any kind of issues occurred in your car.

]]> 2017-05-11 07:17:39 UTC https://padlet.com/ermtelematics/7l6r3g75hhqv/wish/171174827