https://padlet.com/myrna_molina/7kopipyc7odf Made with love en-us 2016-10-24 17:28:24 UTC 2016-10-31 16:56:30 UTC hello@padlet.com myrna_molina https://padlet.com/myrna_molina/7kopipyc7odf/wish/132853676 1. Conventional Stack-

2. Hip-

3. Tail-

4. Gable-

5.Rafter-

6. Bird's Mouth-

7. Plumb Cut-

8. Ridge

9. Pitch-

10. Ceiling Joist-

11. Gable Stud-

12. Frieze Block-


]]> 2016-10-24 20:46:36 UTC https://padlet.com/myrna_molina/7kopipyc7odf/wish/132853676 https://padlet.com/myrna_molina/7kopipyc7odf/wish/133161876 1.conventional stack - uses rafters and ceiling joists
2.hip - on the roof alows water to flow in 4 directions 
3.tail - the end of a rafter 
4.gable - alows water to flow 2 directions 
5.rafters - used for roof framing 
6.birds mouth - the notch on the bottom of the rafters 
7.plumb cut - a type of cut on a rafter
8.ridge- it's the part that forms the peak of the roof 
9. Pitch - the slope of the roof 
10. Ceiling joist - give more support to roof 
11. Gable stud - 
12. Frieze block - ]]> 2016-10-25 20:08:28 UTC https://padlet.com/myrna_molina/7kopipyc7odf/wish/133161876 nicholasl243 https://padlet.com/myrna_molina/7kopipyc7odf/wish/133163904 1.Conventional stack: framing used in residential construction.
2.hip:
Water flows in four directions.
3.Tail:
It makes up the overhang of the roof.
4.Gable:
Water flows from 4 directions from a ridge.
5.Rafter:
The roof framing similar to a stud the slope
6.Birds mouth:
The notch in the bottom of the rafters.
7.plumb cut:
Any cut on a rafter that will be plumb.
8.Ridge:
Horizontal framing member that forms the peak of the roof.
9.pitch:
The angle or slope of the roof.
10. celling:
Are ways we create triangulation.
11.Gable stud:
The studs Are in a stacked roof 
12:Frieze Block:
A space block between each rafter or truss.






]]> 2016-10-25 20:18:02 UTC https://padlet.com/myrna_molina/7kopipyc7odf/wish/133163904