IDEA SHEET by MA. REGIE DIAZ https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l Made with love en-us 2021-11-24 22:49:19 UTC 2022-02-28 23:49:00 UTC hello@padlet.com https://padlet.net/icons/png/1f970.png https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1916978998 1. Check the label of every garment before ironing. This is necessary as some fabrics need special care instructions. 
2. Unfold your ironing board near the outlet. Plug in your iron and choose the appropriate setting based on the material of the clothes you are ironing.
3. Preheating the flat iron should be done before starting. You will have to wait about 2-5 minutes to let the iron warm up
4. Stretch the garment across the ironing board to make sure it is flat.
5. Run the iron over one part of the garment such as the hem just to be sure that it is not too hot.
6. Move the iron over the pants, blouse, or shirt and take note of pleats and pockets. For the shirts, start with the collar next to the sleeves, and then the shirt itself. For pants and shorts, start with the inside then the outside of the pants starting from the waistband down.

Generally, skirts and dresses are ironed from the top to the hem. If there are pleats, iron from the bottom and work upward with fast strokes. Each pleat should be pressed individually. Hang each garment that you have ironed to keep it from wrinkling again.



: zeah L

]]> 2021-11-29 03:06:10 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1916978998 Freyah Lopez https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1916996018 First,place the recommended ammount of water,then place the bottle upsidedown,place the nipple,nipple ring and cap,Cover the Sterilizer and turn on the unit,wait for 10 minutes with an automatic cycle to kill off the bacterias.Once this cycle ends the unit will automatically begin to cool down.]]> 2021-11-29 03:18:38 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1916996018 https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1916998829  1. Add the recommended amount of water to the sterilizer.
Steam sterilizers require the addition of a small amount of water to create steam. Consult your user manual to determine how much water to use. Too little water may not sterilize the bottles properly, but too much could cause the basin to overflow.

2.Clean your bottles and accessories. 
The steam sterilizer kills germs, but will not actually clean off milk or formula residue. Wash your bottles, nipples, and other accessories with warm, soapy water and rinse them thoroughly before you put them into the sterilizer.

3.Load the sterilizer.
Place one bottle upside-down on each prong. Do not attempt to load more bottles into the sterilizer than there are prongs. Most only have room for about six bottles, so if you have more than that, you will need to clean the bottles in batches.

4.Place the nipples, nipple rings, and caps inside.
These pieces should be spaced apart enough that they do not touch. If the sterilizer has lower prongs, space the accessories in between these prongs to hold them in place.

5.Put the cover on.
Electric sterilizers work by generating steam. This steam needs to be contained inside the sterilizer to clean the bottles properly. Make sure the cover is on securely before you turn on the sterilizer.

6.Turn on the machine.
The sterilizer should automatically begin heating to a temperature high enough to generate steam and kill most of the bacteria in and on the bottles and nipples. For most electric steam sterilizers, the process takes about 10 minutes, although the time required is variable

7. Remove the bottles when the cycle finishes. Do not attempt to remove them until after the sterilizer finishes its cooling cycle. Dry the bottles with a clean dish towel or allow them to air dry.



: zeah L]]> 2021-11-29 03:20:40 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1916998829 https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1917003744
  • Wash your hands with soap and warm water.
  • Use a clean thermometer, one that has been washed in cold water, cleaned with rubbing alcohol, and then rinsed to remove the alcohol.
  • Do not eat or drink anything for at least five minutes before you take your temperature because the temperature of the food or beverage could make the reading inaccurate. You should keep your mouth closed during this time.
  • Place the thermometer tip under the tongue.
  • Hold the thermometer in the same spot for about 40 seconds.
  • Readings will continue to increase and the F (or C) symbol will flash during measurement.
  • Usually, the thermometer will make a beeping noise when the final reading is done (usually about 30 seconds). If you are keeping track, record the temperature and the time.
  • Rinse thermometer in cold water, clean it with alcohol and rinse again.


    Zeah L

    • ]]>     2021-11-29 03:24:06 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1917003744     Freyah Lopez https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1917011238 First,Check the label of every garments before ironing because some clothes needs special care,then unfold the ironing board near the outlet then plug the iron in and choose the appropriate settings based on the material of the clothes,then you need to wait for 2-5 minutes to make sure that the iron is warm enoug,then you need to stretch the garment ironing board to make sure it's flat enough to be ironed,then run the iron in the hem of the clothes to make sure if its hot enough to use,then start ironing the clothes,if there are some pleats you should iron from the bottom to the top in fast strokes make sure that yun press each pleats one by one,Hang each garments to prevent it on wrinkling again.Then last step Unplug the iron and wait for it to cool down before storing it]]> 2021-11-29 03:29:33 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1917011238 https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1917021408 1. Separate Your Laundry
    sorting your laundry  into different piles based on fabric type and color is a step number one, you should also check the care label of each garment for washing instructions, so as to avoid damaging your fabrics. Make sure to pay extra attention to your more delicate items: You should wash them either by hand, or on the delicate cycle and in a mesh bag.

    2. Choose the right washing cycle
    Wash cycles consist of two important speeds: A speed at which it agitates or tumbles your clothes with water, and a speed that spins the water out of your clothes. Once again, when picking the correct washing cycle, you should refer to your garments’ fabric care label. This way, you can maximize cleanliness while also protecting your clothes. Your options range from normal and permanent press to delicate and quick cycle.

    3. Set the water temperature 
    Using the correct water setting in your washer can make a world of difference in your laundry. Hot water, for instance, sanitizes and kills germs better, but in some cases, it can shrink your clothes, fade your fabrics, set certain stains, and requires a lot more energy. So, reserve hot water washes for bath and kitchen towels, bedding, sturdy fabrics and any extremely dirtied items. For moderately dirty loads, dark colors, and the permanent press cycle, use warm water. Last but not least, use cold water in the delicate cycle for delicate items, fabrics that have dyes that might bleed, or clothes that aren’t especially dirty. Cold water is the gentlest way of washing your garments, and it also requires less energy, so you can save energy & protect the environment. Decide to deliver outstanding stain removal in all water conditions, tide laundry detergents offer an effective cold water clean even for dirty items

    4. Add Detergent and Fabric Softener
    Before adding your choice of detergent and fabric softener, make sure you read your washer’s manual to find out which goes where. The amount of detergent needed varies by load size and washing machine type, so check the back of the detergent box and look for any labels on your washing machine to find out how much you should use, as too much laundry detergent might cause problems.
    Alternatively, you can just pop a pac of Tide pos in your empty washing machine drum and move on to the next step!

    5. Load the Washing Machine
    This is the step where you dump your clothes into your washer. Make sure not to overcrowd your clothes as overloading the machine may result in the clothes not being washed as they should be. Also, incorrect amounts can cause operational problems and damage.
    • Small loads: ⅓ of the drum
    • Medium loads: ½ of the drum
    • Large loads: ¾ of the drum

    6.Turn on the Washer
    Just close the door and hit the Start button. Some washing machines can indicate that the door isn’t closed properly, while some can’t. Always remember to check before starting to avoid accidents!
    Leave your washing machine door open after use to allow it to air out and help prevent mold and mildew from growing.


    : Zeah L


    ]]>     2021-11-29 03:36:47 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1917021408     Freyah Lopez https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1917021669 Wash your hands and take the thermometer by its holder,then clean the pointed end of the thermometer by rubbing alcohol or soap and cool water,inform the cluent that you take their temperature under the armpit,leave the thermometer in place until you hear a beep,remove it carefully and read the temperature in the digital display,clean it with a cotton ball soaked in alcohol then put it in the container,lastly record the reading then wash your hands.]]> 2021-11-29 03:36:54 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1917021669 Freyah Lopez https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1917030028 Sort the clothes by its color and material,then put the detergent in the machine,then put the clothes loosely in the washing machine,load the laundry as high as the manufacturer specifies,close the lid and choose the setting acording to what you are washing,turn on the machine and let the unit do it's work,wait the machine until it stops before you unload the laundry,load the next batch of clothes and repeat steps 5 and 6 until there's no more clothes to wash,lastly turn off and unplug the unit.]]> 2021-11-29 03:43:24 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1917030028 Zairine Arcellano https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1925241435
  • Separate all parts of the bottle and pull the teat out of its screw cap.
  • Use hot water and dishwashing detergent.
  • Clean all areas of the bottle with a bottle brush, including the thread where the cap screws on.
  • Remove any milk still sitting in the teat or the hole with a teat brush.
  • Squeeze hot, soapy water through the teat hole, then do the same with clean water to rinse the teat.
  • Make sure to rinse the bottles and equipment well.

    • ]]>     2021-12-02 14:19:35 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1925241435     Zairine Arcellano https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1926959694 1. Must check the garment and fabric before ironing it, some garment need special care. 
    2. Then unplug your ironing board near the outlet but make sure the outlet is not wet. To avoid short circuit.
    3. Preheating the iron before use it. It's typically takes 2-3 minutes.
    4. Next stretch the garment on the ironing board to make sure it's flat.
    5. Run the iron to any part of garment, to make sure if it's too hot. To avoid any risk.
    6. In ironing the tshirt, pants and blouse, first you need to start with collar after that in the sleeve. Then the shirt itself. In the pants make sure the you start to inside and outside of the pants.
    6. Unplug and don't storing it after you use it, let it cool to avoid any risk also.

    ]]>     2021-12-03 09:03:35 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1926959694     Zairine Arcellano https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1926963191 In a bowl of cool, soapy water, clean the thermometer liquid soap can be used. Thoroughly rinse with clean running water, use the thermometer right away, and then repeat the process after you've used the thermometer. Allow the thermometer to dry naturally on a clean paper towel before storing it.]]> 2021-12-03 09:06:07 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1926963191 Zairine Arcellano https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1926966932
    Start a cycle in the washing machine with vinegar. Then wipe Down the Washing Machine's Lid and the Rest of the Machine. Concentrate on the Dispenser for Detergent and Fabric Softener. Next repeat the Baking Soda cycle, lasty allow the lid to dry out by leaving it open.




    ]]>     2021-12-03 09:08:58 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1926966932     Ella May S Oserin 8 Mahogany WASHING MACHINE https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1929153538 Separate Your Laundry. Sorting your laundry into different piles based on fabric type and color is step number one. ...
    1 Choose
     the Right Washing Cycle. ...

    2 Set the Water Temperature. 

    3Add Detergent and Fabric Softener
    . 
    4Load the Washing Machine. ...

    5Turn on the Washer. ...

    6Clean Your Washing Machine.]]>     2021-12-05 02:37:35 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1929153538     ELLA May S Oserin https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1929160081 Get the necessary equipment together. As the iron can get hot, you want to have all your materials assembled before you begin ironing. You do not want to be fumbling with a hot iron while trying to grab something, so have everything ready before turning the iron on

    .[1]
    You will need an ironing board, which is a large, flat surface over which you can iron your clothing.
    You will need an old cloth to protect delicate items.

    [2]
    Sort your laundry by material. Different materials require different means of ironing. You should sort your clothing by material. Cotton clothing, for example, should be ironed differently than silk clothing. You will want to start ironing the clothes that require the lowest heat setting, and then move up

    [3]
    Acetate, rayon, silk, and wool should all be ironed at a low setting. For rayon and silk, turn the items inside out prior to ironing. For wool items, place a damp cloth between the item and the iron.

    [4]
    Medium heat should be used for polyester, and high heat should be used for cotton. Both fabrics should be slightly damp prior to ironing.
    Check that the iron is ready. Irons indicate they are ready in different ways. A light may turn on or off, or an icon may display indicating it's safe to iron. Make sure to wait until the iron is ready to begin. Ironing with a cool iron will be inefficient.

    [5]
    If you're unsure how your iron indicates it's ready, check your instruction manual.Use a damp cloth when ironing lace and wool. Delicate fabrics should not have direct contact with the iron. Lace and wool should not be ironed directly. Use a damp cloth when ironing these types of fabrics.

    [6]
    Make sure the cloth is damp and not sopping wet.
    If you're unsure of the fabric's material, check the label. This should tell you what the clothing is made from.Make sure cotton and polyester fabrics are damp prior to ironing. Cotton and polyester should not be ironed dry. Make sure items made from these materials are slightly damp prior to ironing.

    You can pull cotton and polyester items out of the dryer before they get completely dry. You can also spritz them with a spray bottle filled with water to get them damp.]]>     2021-12-05 02:51:44 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1929160081     Ella May S Oserin https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1929165249 Clean the tip with cold water and soap, then rinse it.

    Turn the thermometer on.
    Put the tip under your tongue, towards the back of your mouth.

    Close your lips around the thermometer.

    Wait until it beeps or flashes.

    Check the temperature on the display]]>     2021-12-05 03:03:26 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1929165249     ELLA May S Oserin https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1929167887 Fill a large, clean pot with enough water to cover the bottles.

    Submerge the freshly washed bottles in the water upside down, making sure there aren't any air bubbles at the bottom.

    Bring the water to a boil.

    Boil the bottles for five minutes (check manufacturer guidelines for variations).

    Turn the heat off and remove the bottles using tongs

    Place then on clean,dry discloth and allow them to air dry ]]>     2021-12-05 03:09:36 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1929167887     How To Use a Bottle Sterilizer? https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1932709709
  • Fill a large, clean pot with enough water to cover the bottles.
  • Submerge the freshly washed bottles in the water upside down, making sure there aren’t any air bubbles at the bottom.
  • Bring the water to a boil.
  • Boil the bottles for five minutes (check manufacturer guidelines for variations).
  • Turn the heat off and remove the bottles using tongs.
  • Place them on a clean, dry dishcloth and allow them to air dry.

    • - m.panuelos
    ]]>     2021-12-07 04:14:00 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1932709709     https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1932716424 [ you may check the label of the shirt to know what materials it is made of. ] 

    1. Wash your shirt, making sure any stains are removed as ironing could set them in further. 

    2. Set up your ironing board.  

    3. Turn your iron onto the correct setting. 

    4. Start off with the collar. 

    5. Move onto the sleeves.  

    6. ron the back of your shirt. 

    7. Flip the shirt over and work on the front.

    -m.panuelos ]]>     2021-12-07 04:19:49 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1932716424     https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1932719172 A digital thermometer is useful for taking underarm temperature. Don’t use a mercury thermometer, which can be dangerous if it breaks.

    To measure underarm temperature:

    Check that the thermometer is on.
    With the tip of the thermometer pointing at the child, have the child lift up their arm, slide the thermometer under their arm, with the tip gently pressed against the center of the armpit.
    Have the child put their arm down, close against the body so the thermometer stays in place.
    Wait for the thermometer to take its reading. This will take about a minute or until it beeps.
    Remove the thermometer from their armpit and read the temperature.
    Clean the thermometer and store for its next use.

    - m.panuelos ]]>     2021-12-07 04:22:08 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1932719172     https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1932723282 Separate and divide for laundry success. 

    Read the care label on clothing before washing. Some clothing can only be dry cleaned while other clothing, like that made of wool, needs to be hand-washed with a special soap and dried by placing over a towel or rack.

    To protect all clothes from the damage that a washing machine can do, zip all zippers, and turn the clothes inside out before washing.

    Choose the right setting: Washing machines have settings for water temperature. Use hot water for light-colored items that are especially dirty or smelly. Use cold water for dark clothes (especially new ones) whose colors are more likely to run. Cotton items also require cold water to avoid shrinkage.

    You'll also see settings for load size, usually small, medium or large. If your dirty laundry fills the machine to one third, then select small; half-way full is medium; and three-quarters full is large. Never stuff the machine, because you need room for the water. 

    - m.panuelos

    ]]>     2021-12-07 04:25:14 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1932723282     Science https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1935200052 Flat Iron
    1.Check the label of every garment before ironing. This is necessary as some fabrics need special care instructions.
    2.Unfold your ironing board near the outlet. 
    Plug in your iron and choose the appropriate setting based on the material of the clothes you 
    are ironing.
    3.Preheating the flat iron should be done before starting. You will have to wait about 2-5 minutes to let the iron warm up.
    4.Stretch the garment across the ironing board to make sure it is flat.
    5.Run the iron over one part of the garment such as the hem just to be sure that it is not too hot.
    6.Move the iron over the pants, blouse, or shirt and take note of pleats and pockets. For the shirts, start with the collar next to the sleeves, and then the shirt itself. For pants and shorts, start with the inside then the out side of the 
    pants starting from the waistband down. Generally, skirtand dresses are ironed from the top to the hem. If there are pleats, iron from the bottom and work upward with fast strokes. Each pleat should be pressed individually. Hang each garment that you have ironed to keep it from wrinkling again.
    7.Unplug the iron and allow the unit to cool before storing it.]]>     2021-12-08 06:04:19 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1935200052     TLE melorzyannjaren https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1935210476 Thermometer
    Body temperature is a measurement of the amount of heat in the body. 
    The balance between heat produced and heat lost is the body temperature. 
    The normal adult body temperature is 37 degrees Celsius. There is a normal 
    range in which a person’s body temperature may vary and still be considered 
    normal. Take a look at these normal ranges of body temperature:
    • Oral:36.4 to 37.2 degrees Celsius 
    • Rectal:37 to 37.8 degrees Celsius 
    • Axillaries:35.9 to 36.7 degrees Celsius


    ZYANN JAREN R.MELOR]]>     2021-12-08 06:15:13 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1935210476     TLE melorzyannjaren https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1935212542 Flat Iron
    1.Check the label of every garment before ironing. This is necessary as some fabrics need special care instructions.
    2.Unfold your ironing board near the outlet. Plug in your iron and choose the appropriate setting based on the material of the clothes you are ironing.
    3.Preheating the flat iron should be done before starting. You will have to wait about 2-5 minutes to let the iron warm up.
    4.Stretch the garment across the ironing board to make sure it is flat.
    5.Run the iron over one part of the garment such as the hem just to be sure that it is not too hot.
    6.Move the iron over the pants, blouse, or shirt and take note of pleats and pockets. For the shirts, start with the collar next to the sleeves, and then the shirt itself. For pants and shorts, start with the inside then the out side of the pants starting from the waistband down. Generally, skirtand dresses are ironed from the top to the hem. If there are pleats, iron from the bottom and work upward with fast strokes. Each pleat should be pressed individually. Hang each garment that you have ironed to keep it from wrinkling again.
    7.Unplug the iron and allow the unit to cool before storing it.


    ZYANN JAREN R. MELOR]]>     2021-12-08 06:17:26 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1935212542     Daniel SOlomon https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1939611695 1. Place the recommended amount of water as specified in the manufacturer’s instructional manual.Then, plug in the unit.
    2. Place the bottle upside down (use the prongs to
    support them individually). Place the nipples, nipple
    rings and caps in such a way that they do not touch
    each other. Either prop them between the lower
    prongs, or place them on the supplied surface.
    3. Cover the sterilizer and turn on the unit. Sterilization
    typically takes about 10 minutes with an automatic cycle that raises water temperature to a sufficient level to kill off any bacteria (212degrees Fahrenheit). Once this cycle ends, the unit automatically begins to cool.
    Using Tools, Equipment and Paraphernal.Some models or units will not allow you to open the cover until the cooling cycle is completed.
    4.Unplug the unit.
    5.Remove the feeding bottles from the sterilizer.
    6.Clean the sterilizer based on the manufacturer’s specifications.]]>     2021-12-10 03:19:56 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1939611695     Daniel Solomon https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1939614932 1.Check the label of every garment before iron-
    ing. This is necessary as some fabrics need special care instructions.
    2.Unfold your ironing board near the outlet.
    Plug in your iron and choose the appropriate
    setting based on the material of the clothes you
    are ironing.
    3.Preheating the flat iron should be done before
    starting. You will have to wait about 2-5 minutes to let the iron warm up.
    4.Stretch the garment across the ironing board to make sure it is flat.
    5.Run the iron over one part of the garment such as the hem just to be sure
    that it is not too hot.
    6.Move the iron over the pants, blouse, or shirt and take note of pleats and
    pockets. For the shirts, start with the collar next to the sleeves, and then the
    shirt itself. For pants and shorts, start with the inside then the out side of the
    pants starting from the waistband down. Generally, skirt
    and dresses are ironed from the top to the hem. If there are pleats, iron from
    the bottom and work upward with fast strokes. Each pleat should be pressed
    individually. Hang each garment that you have ironed to keep it from wrinkling
    again.
    7.Unplug the iron and allow the unit to cool before storing it.]]>     2021-12-10 03:22:21 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1939614932     Daniel Solomon https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1939623175 1. Carefully place the tip of the thermometer under your child's tongue.
    2. With your child's mouth closed, leave the thermometer in place for about 1 minute until you hear the “beep”
    3. Remove the thermometer and read the temperature.]]>     2021-12-10 03:28:00 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1939623175     DAniel Solomon https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1939637174 1.The very first step in washing is sorting the clothes
    of your client. Separate white and light-colored from dark-colored clothes. Also, they should be sorted according to their material. Wash clothes with heavy fabrics together and clothes with light fabrics together.
    2. Put detergent into the washing machine. Let the detergent go to the bottom of the washing machine.
    3. Put the clothes loosely into the washing machine.
    4. Load the laundry as high as the manufacturer specifies or to the top row of
    holes in the tub.
    5. Close the lid and choose the setting of the washing machine according to
    what you are washing.
    6.Turn on the machine. Let the unit work through all of the cycles. Wait for the machine to turn off before you unload the washed laundry.
    7. Load the next batch of clothes and do steps 5 and 6 again until you are
    done with the laundry.
    8.Turn off and unplug the unit.]]>     2021-12-10 03:38:07 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1939637174     Keilyn Villanueva https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1944067085 Do not eat or drink anything for at least five minutes before you take your temperature because the temperature of the food or drink could make the reading inaccurate. Use a clean thermometer, one that has been washed in cold water, cleaned with rubbing alcohol, and then rinsed to remove the alcohol. Readings will continue to increase and the F (or C) symbol will flash during measurement.]]> 2021-12-13 09:40:50 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1944067085 Keilyn Villanueva https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1944072175  Check the label of every garment before ironing because some clothes need special care. Then unfold the ironing board near the outlet, plug the iron in and choose the appropriate settings based on the material of the clothes. Then you need to wait for 2–5 minutes to make sure that the iron is warm enough. Hang each garment to prevent it from wrinkling again. Unplug the iron and wait for it to cool down before storing it. ]]> 2021-12-13 09:44:20 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1944072175 Keilyn Villanueva https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1944075463 Preparation of sterilizer:  Fill clean bottle with 6 oz/180 ml of clean water and pour into sterilizer. Close the lid, place inside microwave, and set time according to instructions. Let items and water cool for at least 10 minutes.]]> 2021-12-13 09:46:29 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1944075463 Keilyn Villanueva https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1944081628 Separating your laundry into different piles based on fabric type and color is step one. You should also check the care label of each garment for washing instructions, so as to avoid damaging your fabrics. Washing cycles consist of two important speeds: a speed at which it agitates or tumbles your clothes with water, and a speed that spins the water out of your clothes. Your options range from normal and permanent press to delicate and quick cycles. Coldwater is the gentlest way of washing your garments, and it also requires less energy.

    detergents offer an effective cold water clean even for dirty items. The amount of detergent needed varies by load size and washing machine type. Leave your washing machine door open to allow it to air out and help prevent mold and mildew from growing.]]>     2021-12-13 09:50:46 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1944081628     Lawrence G. Maloles https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1952841768 Put all parts of the cleaned bottle, 
    Cover the equipment with tap water.
    Make sure all air bubbles are out of the bottles and that they are fully submerged under the water.
    Bring the water to the boil.
    Boil for 5 minutes.]]>     2021-12-17 01:11:19 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1952841768     Lawrence G. Maloles https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1952860313 you need a powerful steam iron to get your dresses, shirts and pants crisp and wrinkle-free. steamers can get the job done, but it's the heat and weight of a steam iron (plus the support provided by your ironing board) that assure you get the super smooth results you crave.

     today's irons are making this once onerous job easier and quicker to do. Top models heat up quickly and have electronic controls to more accurately hold precise and safe temperature to prevent burning and scorching. They steam without dripping and are easier to use with large, see-through and removable water tanks and retractable cords.]]>     2021-12-17 01:24:59 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1952860313     Lawrence G. Maloles https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1952864826 defines a thermometer as “an instrument for determining temperature.” “Thermo” is a prefix related to heat, while “meter” is a suffix that’s used for any device that measures. A few other examples would be barometer, speedometer, and odometer.]]> 2021-12-17 01:28:13 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1952864826 Lawrence G. Maloles https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1952875415 A washing machine laundry machine, clothes washer, or washer is a home appliance used to wash laundry. The term is mostly applied to machines that use water as opposed to dry cleaning  which uses alternative cleaning fluids and is performed by specialist businesses or ultrasonic cleaners. The user adds laundry detergent, which is sold in liquid or powder form, to the wash water.A washing machine laundry machine, clothes washer, or washer is a home appliance used to wash laundry. The term is mostly applied to machines that use water as opposed to dry cleaning hich uses alternative cleaning fluids and is performed by specialist businesses or ultrasonic cleaners. ]]> 2021-12-17 01:35:57 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1952875415 Genezarette Lar Gonzales https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1980140944 1. Wash your hair with a good conditioning shampoo. Blow-dry it after wash. Use a smoothing and conditioning shampoo if you have frizzy, thick hair. For thin hair, you should opt for the volumizing products.
    2. Towel dry your hair after washing it and follow with a blow-dry. When drying the hair, do it from the roots to the tips. Comb your hair well and detangle it. This is the first step of hair straightening.
    3. The next step is to apply a heat protection spray to protect your hair from the damage caused due to heat. Avoid applying the serum on the roots as it would make the hair greasy.
    4. While making the hair ready for straightening, divide the hair into sections so that you can straighten your hair uniformly on all sides.
    5. Set the correct temperature on the iron. It depends on the length of the hair. Refer to the manual for directions.
    6. Leave an inch from the root and start straightening your hair. Straighten one section of hair at a time. Repeat the method for each section.

    7. Enjoy looking at your sleek and straight hair in the mirror.
    ]]>     2022-01-07 07:19:07 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/1980140944     Genezarette Lar Gonzales https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/2070460925 Name: Genezarette Lar Gonzales
    1. Wash your hair with a good conditioning shampoo. Blow-dry it after wash. Use a smoothing and conditioning shampoo if you have frizzy, thick hair. For thin hair, you should opt for the volumizing products.
    2. Towel dry your hair after washing it and follow with a blow-dry. When drying the hair, do it from the roots to the tips. Comb your hair well and detangle it. This is the first step of hair straightening.
    3. The next step is to apply a heat protection spray to protect your hair from the damage caused due to heat. Avoid applying the serum on the roots as it would make the hair greasy.
    4. While making the hair ready for straightening, divide the hair into sections so that you can straighten your hair uniformly on all sides.
    5. Set the correct temperature on the iron. It depends on the length of the hair. Refer to the manual for directions.
    6. Leave an inch from the root and start straightening your hair. Straighten one section of hair at a time. Repeat the method for each section.

    7. Enjoy looking at your sleek and straight hair in the mirror.

     
     
     
     
     
     
     
     



    ]]>     2022-02-28 23:49:00 UTC https://padlet.com/maregiediaz2/7i0g82itrd1mqe6l/wish/2070460925