XI Electronics 1 by Ai Susilawati

DAVA DWI PUTRA PRATAMA

2022-12-01 07:26:15 UTC

•What is an ultrasonic sensor?
An ultrasonic sensor is an instrument that measures the distance to an object using ultrasonic sound waves.
An ultrasonic sensor uses a transducer to send and receive ultrasonic pulses that relay back information about an object’s proximity.
High-frequency sound waves reflect from boundaries to produce distinct echo patterns.
•How Ultrasonic Sensors Work.
Ultrasonic sensors work by sending out a sound wave at a frequency above the range of human hearing.
•Why use an Ultrasonic Sensor?
Ultrasound is reliable in any lighting environment and can be used inside or outside.

2022-12-01 07:26:29 UTC

Annisa Septyani Setiawan

2022-12-01 07:26:38 UTC

Digital Multimeter (DMM) is a complex combination of Analog to Digital Converter (ADC), Digital Display (LCD), Comparator, Encoder and logic controller etc.

Digital Multimeters have several advantages over AMMs as they have some special features for measuring additional amounts of electricity. It is used to calculate amperage, voltage, resistance and capacitance.

One of the features of a Digital Multimeter more than an Analog Multimeter is that it can be used to test and check different electronic components

Maulana Dzulfiqar Mundzir

2022-12-01 07:26:49 UTC

The Condensers or capacitors are electrical components that are used / function to store electrical charges but are temporary and also filter voltage.
Condensers have a unit called Farad which is derived from the name of the inventor, Michael Faraday.
Capacitors are widely used as part of electrical circuits in many common electrical devices, unlike resistors, ideal capacitors do not dissipate energy.
Condensers are identified as having two legs and two poles, namely positive and negative and have electrolyte liquid and are usually tubular.
Types of Capacitors:
•Ceramic capacitors
•Tantalum capacitors
•Electrolytic Capacitors
•Paper capacitors
•Etc

Yudhistira Aulia Chandra

2022-12-01 07:26:53 UTC

A diode is a two-pole active component, generally a semiconductor, which allows electric current to flow in one direction and inhibits current in the other dire, diode works for :
- The diode has a function as a rectifier of electric current.
- The function of a diode is to be able to convert alternating current (AC) into direct current (DC).
- The diode has a function as a voltage stabilizer..

Raihan Hisyam Yasir

2022-12-01 07:27:03 UTC

Rafie Faikar

2022-12-01 07:27:17 UTC

Avometer si a tool for measure a voltage of a component in electronic items. Example, resistor, LED, travo and the other component. we can measure ohm too, with avomater. Avomater has two tipe, analog and digital

Moch. Alfan Abdilah

2022-12-01 07:27:21 UTC

Solder Pump is a tool for pump the tin from the PCB when remove the damaged component or the component to be replaced.

The way to use it is by melting the tin first with the solder and then pump with the solder pump.

Manda Amelia

2022-12-01 07:27:56 UTC

positive screwdriver

Having a plus-shaped screwdriver bit or plus sign, this screwdriver serves to tighten and loosen screws that have a plus shape.

Rizki septian

2022-12-01 07:28:34 UTC

^{What is a Capacitor? A capacitor is a two-terminal electrical device that can store energy in the form of an electric charge. It consists of two electrical conductors that are separated by a distance. The space between the conductors may be filled by vacuum or with an insulating material known as a dielectric.Capacitors are crucial components in most electronic devices. They are widely used in electronic circuits, power circuits, power supply units, etc. Capacitors are considered as one of the Big Three Passive Components, along with resistors and inductors, which form the basic electronic circuits.}

Difri Maulana

2022-12-01 07:29:09 UTC

rizky putra

2022-12-01 07:29:51 UTC

The function of tin solder is as a tool for connection between two electronic components on PCBs.

Muhammad Dida

2022-12-01 07:30:19 UTC

1.LDR is a type of resistor whose resistance value will change depending on the intensity of the light it receives. This type of resistor is also commonly referred to as a light sensor 
because of how it work

2.Potentiometer is a resistor whose value can be changed according to the needs of its users.

3.LED is a diode that can emit monochromatic light.

4.Resistors are electronic components that are used to inhibit electric current or reduce the value of electric current.

Andika pirmansyah

2022-12-01 07:30:21 UTC

Tinol is an ingredient for soldering. Using tinol should be chosen which has good quality in order to produce a good quality solder.

Teguh abdur

2022-12-01 07:31:01 UTC

LED is short for Light Emitting Diode, which is one of many types of semiconductor devices that emit light when an electric current is passed through them. In addition to lighting, LEDs are also part of the 7 segments in digital clocks and timers and are used in remote controls.

TRI MUHAMAD NUGRAHA

2022-12-01 07:32:39 UTC

AVOMETER ANALOG

Angga Delonix Regia

2022-12-01 07:33:12 UTC

Transistor is a semiconductor device that can be used as an amplifier, as a circuit
circuit breakers and connectors (switching), voltage stabilization, and signal modulation. Generally, transistors
has 3 terminals (legs), namely Base, Emitter, and Collector.

Gina legiman

2022-12-01 07:34:15 UTC

Resistors or barriers are one of the electronic components that have a certain resistance value, where this resistance will inhibit the electric current flowing through it.

Resistor function

In electronic circuits, resistors have several uses, namely as follows.

•Electrical current barrier
•Voltage divider
•Current divider
•Current protection
•etc.

Rahma Fatimah Febrianti

2022-12-01 07:36:35 UTC

Asih Kinasih

2022-12-01 07:36:57 UTC

Avometer is a tool used to measure resistance, voltage and electric current.
There are 2 probes used, namely positive and negative probes. 
the positive probe is red and the negative probe is black.

Dwiky juliansyah

2022-12-01 07:37:18 UTC

The AMS1117 module is a regulator module that functions as a DC to DC voltage step down which consists of several regulatory levels, namely 1,2V, 3,3V, and 5V. In other words, the output of this regulator module is FIXED or FIXED.
Overall the AMS1117 Module is really useful and very useful, apart from that the price and size are really very economical when compared to conventional

specification Module Regulator AMS1117 5V
- Input voltage range of 7V-9V
- Output: 5V, 1A
- Board size: 2.5cm x 1.1cm

zahra nur assyifa

2022-12-01 07:39:11 UTC

A desoldering pump (or solder sucker) is a handy tool that sucks molten solder. You can use it to desolder through-hole components on a circuit board or to rework bad solder joints.

This guide shows how to use and clean iFixit’s desoldering pump. You may need to use some soldering wick to clean up any solder remnant

Ghaida Asmi Nadhiroh

2022-12-01 07:39:17 UTC

As the name implies, the cutting pliers are used to cut the workpiece, that in in the transverse position of the object to be cut.
Made of steel and the handle of the pliers is coated with hard rubber material.
The weaknes is that it cannot be used to cut thick or large fields.

Rizki maulana sidiq

2022-12-01 07:42:34 UTC

Solder paste is an alternative material for attaching small components to the bottom of a PCB , in liquid form, the texture is thick and sticky, gray in color, and smells bad when heated

Devira Mahadiyah Hidayat

2022-12-01 07:44:07 UTC

• Drilling machine sitting is one of the most important tools in the workshop and serves to make a hole.
• This drill press uses a main shaft that is moved up and down and generally used according to needs.
• This drill machine is really needed when working on a circuit

SHENA WALIYAWAN

2022-12-01 07:44:29 UTC

Solder is a type of heating tool that is useful for melting tin so that later it will easily stick to the components or legs of electronic transistorsSolder is a type of heating tool that is useful for melting tin so that later it will easily stick to the components or legs of electronic transistors. Ordinary solder is the most commonly found on the market because the price is easy to reach and also easy to use.Ordinary solder is the most commonly found on the market because the price is easy to reach and also easy to use.in the soldering process, the solder is melted or melted down so that it can be affixed to the joint to be bonded after the solder cools and solidifies.

Rahma Fatimah Febrianti

2022-12-01 07:46:02 UTC

PCB is a board that conductively connects electronic components with tracks, pads, and vias of copper sheet laminated on a non-conductive substrate. PCBs can be in the form of 1 layer, 2 layers or many layers (multilayer).

Haris Bani

2022-12-01 07:46:18 UTC

Solder or soft solder is a metal alloy that melts easily, which is used as a filler metal to join two metal materials
In certain proportions, some metal alloys are eutectic, that is, alloys with this ratio give the lowest possible melting point than mixtures of other ratios.
and also coincides with its freezing point. Noneutectic alloys have different solidus and liquidus temperatures, because such alloys have different melting and freezing points.

Raihan Hisyam Yasir

2022-12-01 07:46:34 UTC

Light Emitting Diode

Electronic components that can emit light.
Small in size and easy to lose.
Has many beautiful colors.
It has two poles, namely the positive pole and the negative pole.

Shinta Annuru Al Zahra

2022-12-01 07:50:28 UTC

Resistor is a component that has a resistance value,serves to block the electric current,
including non polarity components,
the unit used is ohm Ω, and has many types.

Agni amalia zahra

2022-12-01 07:50:35 UTC

A diode is a two-pole active component which is generally a semiconductor, which allows electric current to flow in one direction (forward bias) and inhibits current from the opposite direction (backward bias). Diodes can be likened to a valve function in electronics. Diodes do not actually exhibit perfect alignment characteristics, but rather have complex current and voltage relationship characteristics that are not linear and often depend on the technology or material used and the parameters of use. Some types of diodes also have functions not intended for rectification use.

Difrimaulana

2022-12-01 07:50:40 UTC

trimpot is a small potentiometer that is mounted on a circuit board and turned with the help of a screwdriver
Trimpot is commonly used to calibrate electronic equipment
The basic function of this trimpot is to get the right resistance value in a circuit