IE2 by Steven Baker

Trần Thành Huy

2021-05-14 08:40:33 UTC

The diagram gives information about the process of making paper.
Overall, There are 6 stage to generate paper starting with timber are cut down and Paper are completed is the end stage.
To beginning producing paper, a lot of timber are chopped down from the forest and it is carried by a special tractor to the de-barking factory . After that, The woods are bared shell by the chipping machine.According to the chipping machine, There are 3 phrase. First, It is mechanical Pulping. Then, Chemical Pulping is second period and last but not least is hydrapulper. In subsequences stages, employees screen and clean the product how to perfect. Finally, The original paper is generated with well-qualified.

Gia Bảo

bgia129 — 2021-05-14 08:40:47 UTC

The following diagram illustrates the process of producing paper.
Overall, it is clear that there are 6 stages in the paper production. Beginning with taking wood and ending with check the quality of paper.
First of all, the trees are planted by worker to get better quality. Then, they use a special machine that harvests wood is called an excavator. Before the trees enters the chipping machine where is chopped up with many small pieces, timber taken themselves out skin. Next, the wood pieces are put into the mechanical pulping process and then they are entered to a chemical pulping, going next into the hydra-paper in the same time.
In the next step of this process, the mixtures are screened and cleaned by water to filter waste or tiny sand out pulp. Finally, they are put into a dry machine, where it is made complete sheet of paper at the end of the period.

L

2021-05-14 08:40:51 UTC

Duc Huy

2021-05-14 08:40:59 UTC

The diagram below illustrates the method of producing a paper.
Overall, it may be observed that there are eight stages during this process, beginning with the gathering of trees from the forest and ending with the paper being made within the paper making machine.
To begin with, timber is collected from the forest and brought to be debarked. After the wood has been stripped bare, it enters the chipping machine, where it is chopped up into tiny pieces. From the chipping machine, the wood enters into three separate stages. First, the wood chips are put through the mechanical pulping process, where they are ground and smashed into pulp. Then they need a chemical pulping, going next into the hydra-pulper.
In the subsequent stage, the mixture goes through to be screened and cleaned, to filter any lumps or waste from the pulp. Lastly, the pulp is entered into the paper making machine, where it is pressed to create sheets of paper. The paper is then stored and stacked, ready for shipping and to be used.

Lê Duy Dương

2021-05-14 08:41:09 UTC

The given diagram illustrates the process about different steps related in making paper. It can be clearly seen that there are six stages to make paper, beginning with timber are chopped down and ending with papers are produced.
First of all, timber in the forest are chopped down. After that, it will be transported by tractor to De-Barking. Next, it will be debark to take the light wood inside. Then, the woods are pulped by three ways, mechanical pulping machine, chemical pulping process, hydrapulper. In next step, pulps are being screening and cleaning. Finally, it is put into paper making machine and papers are produced.

Triều Linh

2021-05-14 08:41:28 UTC

The picture give information about the process of making paper. There are six stages to make paper. First, pine timber from planation is taken and made into thinning. Afterwards, the thin piece of pine enters the next process to remove the bark called De-barking in the drum. After the thin piece of pine timber is free from the hard cover, it is made into smaller pieces using a chipper. At there, the timbers will be chopped and parsed into three main processes. There are mechanical pulping process, chemical pulping process and hydra pulper. In subsequences stages, employees screen and clean the product. Finally, they are put into dry machine and complete paper.

Hạ Nguyễn Khánh Vân

2021-05-14 08:41:34 UTC

The manufacturing process for making paper made according to the procedure according to the diagram.We can see there are sĩ distinct stages in this process,from the initial collection of waste paper to the eventual production of unsable paper.
At the first stage in the making paper,people cut the tree ,and they will collect the radiata pine thinnings in paper banks.Next ,the woods are planed .After the wood has been stripped bare,it is chopped up into tiny pieces by the chipping machine.After that, they are ground and smashed into pulp.Then they have

Nguyen Lan Anh

2021-05-14 08:41:40 UTC

The image illustrates the process of making paper.
It can be seen that to create paper must go through many processes. At the begining, timber is harvested and trasported by tractor out of the forest. The next step, the wood will be debarked and then put into the chipping machine, let it be chopped into small pieces.
From the wood chipper, the wood is fed into three more detailed processes. First, the wood chips are put through a mechanical pulping process. Then again through a chemical pulverizer anf fianlly is the hydrapulverizer.
In the next stage, the mixture will be screened and cleaned to filter out waste from the pulp. The last important step is that it will be put into the paper making machine to be pressed into sheets for us to use.

Minh Thư

2021-05-14 08:41:49 UTC

The provided picture illustrates the process making paper.
As can be seen there are eight stages to make paper.
First of all, timbers are chopped down by tractor and taken to be debarked. After that, the woods stripped bare insert the chipping machine. there are three stages from the chipping machine. The first stage is mechanical pulping process. the second stage is chemical pulping process and the last process is hydrapulper. then, the mixture goes through to be screened and cleaned. finally, the pulp is moved to the paper making machine, where it is maked sheets of paper.

khang

kp01052002 — 2021-05-14 08:42:04 UTC

The diagram below explains the way in which paper are producted. Overall, the process consists of seven stages, beginning with the raw material and ending up with the product's inspection.
First of all, they collected raw material, which is pine, oak and eucalyptus. These are woods with extremely large bodies, so only large vehicles can be used to move this wood. Next stage, they will phut these large pieces of wood into de barking to scrape away the rough outer bark, making the wood become smooth.Then, they put that wood into a chipping machine to process it chemically

ngoc phụng

2021-05-14 08:42:41 UTC

Nguyễn Thị Hải Yến

2021-05-14 08:43:03 UTC

The picture illustrates the process of making from the trees that have been collected. Overall, it can be observed that there are eight stage in this process, beginning with the collection trees from the forest and ending with the paper being made in the paper making machine.
To begin with, timber is collected from the forest and taken to be debarked. After the wood has been stripped bare, it enters the chipping machine, where it is chopped up into tiny pieces. From the chipping machine, the wood enters into three separate stages. First, the wood chips are put through the mechanical pulping process, where they are ground and smashed into pulp. Then they have a chemical pulping, going next into the hydrapulper.
In the subsequent stage, the mixture goes through to be screened and cleaned, to filter any lumps or waste from the pulp. Lastly, the pulp is entered into the paper making machine, where it is pressed to make sheets of paper. The paper is then stored and stacked, ready for shipping and to be used.

Ho Nguyen Bao Anh

2021-05-14 08:43:43 UTC

The diagram provides information about the way to produce paper. As can be seen clearly from the given picture, there are seven steps in this production.

First of all, the number of timbers from trees are cut down by a cutting machine. After transporting them to factor, they are debarked. One by one, they are moved into a chipping machine. In this machine, there are three processes which are mechanical pulping one, chemical pulping one and hydrapulper. Before screening and cleaning them, they were completed both mentioned processes. Finally, they are given into a paper making machine.

La Nguyen Ngoc Anh

2021-05-14 08:46:13 UTC

The picture shows the process of making paper from trees.
Overall, it is quite complicated with six different stages.
The first step is amount of trees are cut down to produce logs, after which they are separated the shell before conducting the next stages. The wood core is crushed very small and clean carefully.

2021-05-14 08:52:44 UTC

Lê Trúc Anh
The diagram indicate the process of paper production.
Overall, there are six stages to making paper from the trees

Thuy Dung

2021-05-14 08:54:19 UTC

The given diagram depicts the paper production process. In general, the process consists of 6 stages. The first is to cut down trees that are qualified for paper production. The felled trees will be brought to the factory to remove the bark. Next, it is put into the chopper to cut the core into small pieces, this is the mechanical grinding process. Next is the chemical grinding process and the addition of hydrapulper additives. It is then screened and cleaned. Finally, it is put into the paper making machine and the finished product.

Vu Minh Phuong

2021-05-14 08:54:27 UTC

The illustration shows the paper making process. As can be seen, to create paper must go through many processes. At first, in terms of raw materials, the main material is wood from sustainably managed forests, transported to the factory, peeled and crushed, mixed with water and additives to form a raw material mixture.
Next are 4 production stages. First, spray the material mixture (95% of the mixture is water). Second, format the paper (create a thin layer of paper). Third, laminate and dry the paper. Finally, reinforce and cover the surface of the paper.

2021-05-14 09:01:54 UTC

Nguyễn Huỳnh Khánh Loan
The given the picture gives the information on process of making paper from timbers. Overall, there are six main steps to creat paper for using.
As you can see, first of all, people must collect lots of timbers by knocking down trees. Secondly, the timbers which are cut down, will be moved to De- barking where have enough modern facilities, especially is chipping machine. At there, the timbers will be chopped and parsed into three main processes . They are mechanical pulping process, chemical pulping process and hydrapulper. After that, the debris of timbers continue to be debarked to screening and cleaning machine to make clean. At last, the paper making machine will make them to paper.

Huỳnh Tiến Đăng Khoa

2021-05-14 09:14:47 UTC

The diagram below illustrates the process of manufacturing a paper and the way it is recycled.
The development of creating a paper has five steps. Firstly, the radiata pines thinnings are collected and then bark of the wood is removed by a special drum called debarking drum in a second step. The de-barked wood is then sent to a chipper and afterwards a thermomechanical refiner which utilizes water Afterwards the product is sent to a paper making machine.

Phúc Trường

2021-05-14 09:31:44 UTC

The provided process gives information about the stages of producing a machine paper. Overall, it is clear that there are eight stages to produce the paper from timber. First, the timber would be cut and debarked. Then, the timber put into the chipping machine, Next steps, the timber put into the mechanical pulping and chemical pulping. Afterwards, they enter the hydrapulper. Notably, before creating paper, they screened and cleaned the wood.