# data[].attributes.body
Get the smaller number and the larger number then put the symbols that go along with the equations.

# data[].attributes.body
It is when you have a closed dot and a open dot and the closed dot menas

# data[].attributes.body
smaller than or equal to is a closed dot that goes left, smaller than is an open dot, greater than or equal to is closed to the right

# data[].attributes.body
Get the first number and last number then place them on the number line then if it includes it it is a closed dot if it doesn't its an open dot it depends on what the problem says for it to go either right of left.

# data[].attributes.body
I think that you are supposed rearrange the equation.

# data[].attributes.body
I don't remember

# data[].attributes.body
get the smaller number and bigger number than

# data[].attributes.body
i dont know

# data[].attributes.body
idk

# data[].attributes.body
the open dot is greater and the closed dot is less

# data[].attributes.body
inqualities are a bunch of signs that mean more or less and more

# data[].attributes.body
make a number line and place the numbers on the number line and decide if the number is going to be an open dot or a closed dot, if it is a open dot, then it is nit including the number but if it is a closed dot it will be including the dot.

# data[].attributes.body
Shade above the line for a "greater than" (y> or y≥) or below the line for a "less than" (y< or y≤).

# data[].attributes.body
idek

# data[].attributes.body
You put the symbols in with the expressions and then put them on a graph.

# data[].attributes.body
Open dot is greater than and less than symbol. The closed dot is the same but there are lines under these symbols < >.

# data[].attributes.body
IDEK.

# data[].attributes.body
get the last number and see what it says and do what it say like to go less you have to put the arrow on the left and to go right that means that means graeter.

# data[].attributes.body
by open or closed dot then put the arrow right or left for less than or equal to

# data[].attributes.body
you make a number line and you make a open dot or closed dot to the right and left

# data[].attributes.body
it depends on what the words say like less than 35

# data[].attributes.body
you place the inequality on a number line if its equal to or greater than, less than ten you have a closed dot with an arrow facing back or up. If it is just greater than or less than then it is a open dot with an arrow facing front or back.

# data[].attributes.body
Get numbers and put them in a number line. If its included put a closed circle . If its not then its not included open circle.

# data[].attributes.body
open dot is when you stay on one number and a closed dot is when you go to the side or stay on the number

# data[].attributes.body
Open dot is < > .Closed dot is greater than or equal to/ less than or equal to.

# data[].attributes.body
greater than or equal is closed dot goes right, less than or equal is closed dot to the left, less than is open dot to the left, greater than is open dot to the right.

# data[].attributes.body
its a number line that may have symbols like greater than < or less > the number may have a open dot or closed.

# data[].attributes.body
a line is caught depends on whether it is 3 less is it means that it is going to be an open point because it is less and the three are not included

# data[].attributes.headline
KANNNAN  you use the symbols and graphs to explain a ratio or equation/exspression.

# data[].attributes.subject
KANNNAN  you use the symbols and graphs to explain a ratio or equation/exspression.

# data[].attributes.body
i dont remember

# data[].attributes.body
you make a graph and you make a dot or circle for less than or greater than, and closed dot for less than or equal

# data[].attributes.body
you make the number line going down to how many times you didi it and you go to the next one going up by

# data[].attributes.body
idk

# data[].attributes.body
you find number and then put on gragh

# data[].attributes.body
you put number on the number line and use circles and arrows on the number line and they also point to the number your are using for he proble

# data[].attributes.body
get both numbers and reanrange the euation.

# data[].attributes.body
you use sign's to graph the problem

# data[].attributes.body
idk

# data[].attributes.body
get the numbers them place them in on a line

# data[].attributes.body
It is a number line that has a symbol like greater than and less than.

# data[].attributes.body
You make a graph and then put where

# data[].attributes.body
it depend on where the arrow is going.

# data[].attributes.body
make a number line

# data[].attributes.body
you see if its least and bigger or equal to the sign and to put the dot close or open dot on the number and see which way the sign go

# data[].attributes.body
first you draw a number line 0 to 10 then you figure out if it is a open or closed circle after you figure out what way is the arrow going to go

# data[].attributes.body
You graph an inequality by making a number line and but numbers on the number line and if the number is equal or greater than you need to have a close dot and if its less than you need a open dot

# data[].attributes.headline
KAnnan a line plot put with numbers or data from question. You will you open or closed depending on the question

# data[].attributes.subject
KAnnan a line plot put with numbers or data from question. You will you open or closed depending on the question

# data[].attributes.body
the first thing you do draw a number line because you are going to need it next you have to put some number on it like if it says she needs at least 30 dollars you need to put number that are close to 30 next you have to think if it is at least then do i need to go higher or down and after you do your answer you either put a open or close circle you will know when to use it once you are using the number like 30 the u use open circle because it is the main number

# data[].attributes.body
when you are making an inequalities you first make your number line and put the numbers that you will be using, after that you mark a open or closed dot or an arrow pointing leasts or greater.

# data[].attributes.body
First you write out a number line. After that you put a dot on the number line. An open dot means it involves that number a closed dot means it doesn't involve that number. Then you draw an arrow depending on the problem. If the problem is at least 5 but no more than 10 than you would put a closed dot over the five and draw a line to the 10 then put an open dot over the 10.

# data[].attributes.body
First you make a number line second you put numbers on it third you find out is your answer is a open or closed dot if it is open you draw a circle if it is closed you make a dot open mans you don't include and closed means the opposte. fourth you draw a line going to the end of the number line with an arrow that meanx contionausion.

# data[].attributes.body
First you make a number line than you need dots to make the line function it can be close or circle dots but depend on the problem that you need to solve.

# data[].attributes.body
first u got to determined the numbers then u got to male a number line then u have to put numbers on the number line then u got to determine were u should go the other line should go then u ether

# data[].attributes.body
If it includes  the number on the line then you have  a close  dot also if  it doesn't include the number then it is a open dot.

# data[].attributes.body
you have the number less or more and you will need to put the dot where it goes

# data[].attributes.body
You have to

# data[].attributes.body
make a number line and depending on what the question is is where your going to point the line

# data[].attributes.body
you use a open dot when you not use the in equality

# data[].attributes.body
first you do the number line than you put the numbers than

# data[].attributes.headline
Kannan: put a number line with numbers from the data. You will put open or closed depending on the question

# data[].attributes.subject
Kannan: put a number line with numbers from the data. You will put open or closed depending on the question

# data[].attributes.body
The dot goes over the number.
The arrow goes in the direction  of the values that make it true.
Open dot or open circle
Closed dot or closed

# data[].attributes.body
Draw a number line whatever the sentence is talking about it depends on what the question is talking about and you would have to think would it be open dot or closed dot.

# data[].attributes.body
The first thing you do is make a number line then put numbers on the number line then you determine if the question is asking you for a open or a closed dot. Then you figure out if they want you to go left or right. Then you are

# data[].attributes.body
There is a number line and #'s on the number line and there

# data[].attributes.body
A closed dot means at least which is that or more a closed dot is less or more.

# data[].attributes.body
get the smaller number and the lager then put the right symbols that go with the equations for example less than 7 you would label the graph and and you would go down instead of up so you owuld use

# data[].attributes.body
1st you make a number line and put the numbers in there. 2nd you put a closed dot if it is greater and if it's not then put a opened dot above the number they give you. then you put the arrow right if its greater and if not them put the arrow left.

# data[].attributes.body
you have to put the open dot on the number and equal to and the open dot less than or more than

# data[].attributes.body
The dot goes over the number and the arrow goes in the direction that makes the statement true. open dot for less than.

# data[].attributes.body
Yhu have to um yhu have too go least than

# data[].attributes.body
Make a line and whater the sentences saids

# data[].attributes.headline
when the dot is full then that mean that the answer can be that number when it is not that means do not count the number that it is under 

# data[].attributes.subject
when the dot is full then that mean that the answer can be that number when it is not that means do not count the number that it is under 

# data[].attributes.headline
Draw a numberline then, put a closed or unclosed dot

# data[].attributes.subject
Draw a numberline then, put a closed or unclosed dot

# data[].attributes.body
Before anything you have to have a graph, then you have to the numbers you need. You have to see if the dot is open or closed. If it includes then number or not.

# data[].attributes.body
When graphing enqualitys you nedd to eithier have a closed or open dot depending what you are doing .And you need to have sign like this < > .

# data[].attributes.headline
R-resia get the first number and the last number and place them on the number line then go left or right ig.

# data[].attributes.subject
R-resia get the first number and the last number and place them on the number line then go left or right ig.

# data[].attributes.body
Get the smaller number and the larger number then put the symbols  that go along with the equations.

# data[].attributes.body
have a graph, then you have to the numbers you need. You have to see if the dot is open or closed. If it includes the number

# data[].attributes.body
if a thing is the number and up (or down) you have to have a closed circle and if it says you have only the number above it would be an open circle

# data[].attributes.body
You but the numbers on the line and but a open circle or a closed circle.

# data[].attributes.body
First make a graph with your numbers. Then find out if it is an open dot or filled. Also find out if it gets bigger or smaller.Then plot it.

# data[].attributes.body
Get the first number and last number then place them on the number line then if it includes it it is a closed dot if it doesn't its an open dot it depends on what the problem says for it to go either right of left.

# data[].attributes.body
First you see what the equation is. Then you see if tis a open dot or a close dot, also you see if it is great or less then then put it on the line.

# data[].attributes.body
Get the first number and the last number number put them on the number line and you have figure out if it is going to be an open dot or closed

# data[].attributes.body
If it's least then you put a close dot with an arrow going to the left