# data[].attributes.body
Screwdrivers: With a flat ( slotted ) or star-shaped ( phillips ) point. Used to insert or remove screws.

Screws: Usually have a round head and are round, cylindrical,hexagonal or countersunk.

Spanners: Used to tighten and loosen nuts and bolts. The adjustable wrench can be used for different sized nuts and bolts.

# data[].attributes.body
This protects and decorates the wood.You can use oil or acrylic paint.How to paint wood
1.check that the surface is smooth.
2. when wood is dry sand the surface.
3.then apply the paint.

# data[].attributes.headline
13.JOINING TOOLS:ASEMBLING : (housing joint)

# data[].attributes.subject
13.JOINING TOOLS:ASEMBLING : (housing joint)

# data[].attributes.body
finger joint

dowel joint
full dado/housing joint
mortise and tenon joint

dovetail joint

Before asembling the pieces, you have to shape the piece so that they joint correctly.

By:
Pablo and Laura.

# data[].attributes.body
GIMLET :
Is an instrument that humans use for drill through thin piece of wood and make small holes.

DRILL BITS:
Is a cylindrical bit made of different materials and have different lengths and dimeters for different tasks. Inserted into the front of drill to make holes.

# data[].attributes.body
VICE
It is fixed to the workbench.we use it to fix the piece which we are going to work with.
G-CLAMP
With a screw that we turn to hold the piece

F-CLAMP

Used to fix a piece to the workbench or to fix two pieces together.
It is composed of a head and a screw to fix the piece.

# data[].attributes.body
HAND PLANE
This tool is used for give shape to a piece of wood. It consist of two parts: A wooden body and a steel blade that cuts the wood.

POWER PLANE
This tool is used for smoothing the edges of the boards. It has a saw that spins very fast.
By Alex González Benavides and Juan Martín González.

# data[].attributes.body
hot glue gun
An electric machine that you put a solid thermoplastic stick into.
When you plug in the gun, the resistor meltsADHESIVES
Sticks inmediatly . Takes 20 minutes to set . The 2 substances are mixed in the same proportion .

# data[].attributes.body
POWER SAWS:
*Circular saw:
This uses a blade with teeths that cuts as it mores, you can also fix the saw in place and move the material as the blade turns. Is used to cut planks of wood, for example.
*Band saw:
This uses a blade whit teeth that goes up and down .You can move the machine and clamp the material vice versa.
It cuts sheets or planks, for example.*Jigsaw:
Jigsaw made up of an electric motor and a reciprocating saw blade with a level function on the sole plate allows cutting angles of typically up to 45 degrees relative to the normal vertical stroke for cutting miter joints.
By Héctor and Diego    : )

# data[].attributes.body
-CARPENTER'S PENCIL
They have a Oval Shaped to avoid slipping on the wood .Lead is strong you can use on different surfaces.You sharpen it with a special knife.

-COMPAS
Use to draw circules and arcs and transfer measurement.

-AWL OR PUCH
Use to make small march  in the wood that where to drill a hole.

# data[].attributes.body
STEEL RULER

A ruler , sometimes called a ruler or line gauge, is an instrument used in geometry, technical drawing, printing, engineering and building to measure distances or to rule straight lines. The ruler is a straightedge which may also contain calibrated lines to measure distances.

CARPENTER´S RULER
This type of ruler or metre that was used before, to size other objects.
Now we use this object to size long medium distances. This ruler can be fold into diferent parts.

TAPE MEASURE
A tape measure is a flexible ruler. It consists of a ribbon of cloth, plastic, fibre glass, or metal strip with linear-measurement markings. It is a common measuring tool. Its design allows for a measure of great length to be easily carried in pocket or toolkit and permits one to measure around curves or corners.

# data[].attributes.body
HAND SAWS:
HANDSAW
Used to make straight cuts.

TENON SAW
Used to make more precise cuts.
KEYHOLE SAW
Its thin blade can be used to make curved cuts.

COPPING SAW
Used to make different cuts in thin wood.

# data[].attributes.body
NAILS
Equipament and tools
Consist of an equipment and tools.
An carpenter's hammmer:
Balll pein hammer:
Claw hammer:

How using hammer:
There are different types of nails:common nails,finishing round wire,oval wire,ect

# data[].attributes.body
a)Hand Drill:
It is use to make holes quickly and easily using drill bits.

b)Electric drill:
It makes holes with drill bits using electricity. It is use the same way as a HAND DRILL.

# data[].attributes.headline
6.WASTING TOLLS : DRILLING : HAND DRILLS

# data[].attributes.subject
6.WASTING TOLLS : DRILLING : HAND DRILLS

# data[].attributes.body
GIMLET:
Is an instrument that humans use for drill through thin piece of wood and make small holes.

# data[].attributes.body
RASP
Rasp has triangular teeth on its surface and it's used to make rough cuts. It can has different shapes: flat, square, curved or triangular.
How to use rasp:
1-  Clamp the piece of wood to the workbench so it doesn't move.
2- Hold the handle with your hand and hold the other end with your other hand.
3- Hold the rasp at 45º angle to the wood.
4- Use the full length of the rasp, pressing down at a moderate speed as you move it forward, which is when it removes the material.
SANDPAPER
It's made up of abrasive material glued to a paper support. The size of the grit is indicated on a number on the back of the seet of sandpaper: from 60 to 600. It's best to start sanding an objet with a coarse grit, moving onto a medium grit and finishing off with a fine grit.
How to use sandpaper:
1- Clamp the piece of wood to the workbench so it doesn't move.
2- Take a piece of wood and wrap the sandpaper around it to make it easier to work with.
3- Sand the wood going with the grain. Start with a coarse grit and move to a finer grit to achieve a perfectly smooth surface.

# data[].attributes.body
HAMEER
ndkjhadhbadfhaha  hstfjrwjfsj srtj

# data[].attributes.body
contraseña: primerod

# data[].attributes.body
1. MEASURING TOOLS (steel ruler, carpenter's ruler, tape measure)

# data[].attributes.body
2. MARKING OUT TOOLS (pencil, punch, compass)

# data[].attributes.body
3. HOLDING TOOLS (vice, G-clamp, F-clamp)

# data[].attributes.body
4. WASTING TOOLS: SAWING: HAND SAWS (hand saw, tennon saw, copping saw, keyhole saw)

# data[].attributes.body
5. WASTING TOOLS: SAWING: POWER SAWS (jigsaw, circular saw, band saw)

# data[].attributes.body
6.  WASTING TOOLS: DRILLING: HAND DRILLS  (gimlet, drill bit)

# data[].attributes.body
7. WASTING TOOLS: DRILLING: POWER DRILLS  (portable drill, bench drill, pillar drill)

# data[].attributes.body
8. WASTING TOOLS: PLANING (hand plane, power plane)

# data[].attributes.body
9. WASTING TOOLS: FILING AND SANDING (rasp, sandpaper)

# data[].attributes.body
10. JOINING TOOLS: NAILING (hammer, pincers, pliers)

# data[].attributes.body
11. JOINING TOOLS: SCREWING (flat-head screwdriver, phillips-head screwdriver)

# data[].attributes.body
13. JOINING TOOLS: ASSEMBLING (housing joint)

# data[].attributes.body
12. JOINING TOOLS: GLUEING (hot glue gun)

# data[].attributes.body
14. FINISHING TOOLS (brushes)