# data[].attributes.body
leaves:
for this picture I told my friend to throw a pile of leaves up. I used a fast shutter speed so the leaves weren't blurry, and I got my friend to stand in the middle so the picture is aesthetically pleasing.

# data[].attributes.body
trees:
for this picture i got my friends to lend against some trees and to look away and act natural. I tried to make this photo as visually pleasing as possible by positioning them with the grid.

# data[].attributes.body
Today we took some picture outside which help towards our photoshoot, as my photoshoot is based on nature and unity I got my friends to stand outside in the trees and things.

# data[].attributes.body
The placement and width of shadows in a photograph is created by the angle between the camera and the light source. ... The width of the shadows increases as the direction of the light moves from the camera out to the side

# data[].attributes.body
A light meter is a device used to measure the amount of light. ... Typically a light meter will include either digital or analog electronic circuit, which allows the photographer to determine which shutter speed and f-number should be selected for an optimum exposure, given a certain lighting situation and film speed.

# data[].attributes.body
Ambient light means the light that is already present in a scene, before any additional lighting is added. It usually refers to natural light, either outdoors or coming through windows etc. It can also mean artificial lights such as normal room lights.

# data[].attributes.body
Butterfly lighting is a portrait lighting pattern where the key light is placed above and directly centered with a subject's face. This creates a shadow under the nose that resembles a butterfly. It's also known as 'Paramount lighting,' named for classic Hollywood glamour photography.

# data[].attributes.body
Split lighting is a technique that produces a sense of drama to a portrait. This form of lighting is when half of the subject's face is lit, while the other half is left dark. The light is evenly divided over the subject.

# data[].attributes.body
Soft light is when a light source is large relative to the subject; hard light is when the light source is small relative to the subject. The hardness or softness of light depends mostly on the following two factors: Distance. The closer the light source, the softer it becomes

# data[].attributes.body
Back lighting happens when the light source is behind the subject. This means that the light is directly in front of the camera, with the subject in between.

# data[].attributes.body
Side lighting is light that falls on a subject at roughly ninety degrees to the camera. This means that one side of a subject will be lit and the other side will be in shadow.

# data[].attributes.body
Double exposure:

Firstly, I took pictures of  my friends and outside of buildings and landscapes.

I then used Photoshop to cut around the portrait photo then I opened up the photo of the tree and selected the portrait outline and then copied and pasted it onto the tree photo i then changed the opacity of the portrait so you could see the trees under neath it.

# data[].attributes.body
Background lighting:

when I produced this photo I used the manual settings on my camera and set the shutter speed to 30 secs so i had enough time to do the drawing, I set the aperture to f22 and i set to ISO to 200 so the background wouldn't show.

Firstly I wanted to change the colour of the light so I used a bit of sellotape and coloured it in with a sharpie and then stuck it over the torch.

For this one i got by brother to turn on the lights around the room to see what would happen while i made scribbles  using different colours

# data[].attributes.body
Multiple body outlines:

when I produced this photo I used the manual settings on my camera and set the shutter speed to 30 secs so i had enough time to do the drawing, I set the aperture to f22 and i set to ISO to 200 so the background wouldn't show.

Firstly I wanted to change the colour of the light so I used a bit of sellotape and coloured it in with a sharpie and then stuck it over the torch.

I got my brother stand in different poses and for each pose I changed the colour of the tape so you could see the difference in colour.

# data[].attributes.body
Scribbles:

when I produced this photo I used the manual settings on my camera and set the shutter speed to 30 secs so i had enough time to do the drawing, I set the aperture to f22 and i set to ISO to 200 so the background wouldn't show.

Firstly I wanted to change the colour of the light so I used a bit of sellotape and coloured it in with a sharpie and then stuck it over the torch.

Used the different colours to do scribbles, after each scribble I moved the sellotape slightly so i would get a different colour.

# data[].attributes.body
Body outline:

when I produced this photo I used the manual settings on my camera and set the shutter speed to 30 secs so i had enough time to do the drawing, I set the aperture to f22 and i set to ISO to 200 so the background wouldn't show.

I got my brother to drew round the outline of my body.   The only thing I would change about this is to fill in the gaps missed.

# data[].attributes.body
picture:

when I produced this photo I used the manual settings on my camera and set the shutter speed to 30 secs so i had enough time to do the drawing, I set the aperture to f22 and i set to ISO to 200 so the background wouldn't show.

i used the torch on my phone to do the drawings, I drew a heart with a arrow through it.

# data[].attributes.body
I think this picture shows a sense of community because of the group of people in the photo and how close together they are.

When i took this photo I used a panorama view to be able to get the group of people and the beautiful scenery in to the photo.

# data[].attributes.body
* The quality or character of a particular person or thing that distinguishes them from others of the same kind, especially when strongly marked.
- UNIQUE
- DIFFERENT

# data[].attributes.body
* A group of people living in the same place or having a particular characteristic in common.
- A CHURCH
- A SCHOOL

# data[].attributes.body
* Sensitivity of the image sensor or film to light.
* The more sensitivity to light means a higher ISO.
* The higher ISO creates more digital noise which changes the quality of the image.

# data[].attributes.body
I think this picture shows a sense of community because of all the people siting together talking.

When i took this picture i was thinking about the rule of thirds and how i used the grid so i tried to place the table in the center of the grind so it is more aesthetically pleasing.

# data[].attributes.body
* Measured in f-stops
* The smaller the f the wider the shutter
* Shutter opens and closes to let a certain amount of light in, the wider the shutter the more light, the smaller the shutter the less light.

# data[].attributes.body
* A greater depth of field means that an image is focused on one particular area and therefore has a smaller aperture
* A smaller depth of field means that an image has a larger area which has been focused and therefore has a large aperture.

# data[].attributes.body
* The state of being united or joined as a whole.
- A FAMILY
- TOGETHER

# data[].attributes.body
* It is measured in seconds and is the amount of time the stutter is open for.
* The smaller the fraction the more light is let in. so when you change the shutter speed you have to make sure that you change the aperture to even out the amount of light that comes in.

# data[].attributes.body
RULE OF THIRDS -
* The grid on the screen has both vertical and horizontal lines these lines intersect which creates points of interests in the photo.
* To create a photo which is visually pleasing you should place the things you want to see first on the intersection or along the lines.

# data[].attributes.body
I think this picture shows a sense of community because of all the people are standing together in a close area.

When I took this photo i used a go pro with a fish a lens so it has a wide perspective and includes everyone in it