# data[].attributes.body
This is the technical bit! Sublimation printing is the application of sublimation inks onto a surface using a heat press to provide the required combination of heat, time and pressure. This combination causes the inks to be converted from a solid to a gaseous state enabling them to penetrate the sublimatable surface so that a permanent, full colour image is formed. The colour penetrates the surface of the item so that the result is colourful, long lasting and resistant to scratching unlike some other printing methods that merely print onto the surface of the item.

Dye sublimation printing is always done on a polyester, polymer, or polymer coated item. At high temperatures, the solid dye converts into a gas without ever becoming a liquid. The same high temperature opens the pores of the polymer and allows the gas to enter. When the temperature drops, the pores close and the gas reverts to a solid state. It has now become a part of the polymer. For this reason true dye sublimation cannot be done on natural materials such as 100% cotton. Natural fibres and non-coated materials have no "pores" to open.

# data[].attributes.body
solid ink printer. solid ink printer. A laser-class printer that uses solidwax inks that are melted into a liquid before being used. Instead of jetting the ink onto the paper directly as inkjet printers do, solid ink printers jet the ink onto a drum.  A better registration of color is obtained by transferring the ink to the drum first and then to the printer, because the drum can be more tightly controlled than moving paper. 🐵🐵🐵🐵🐵

# data[].attributes.body
Description:
A laser printer that prints in color using four toner cartridges (Cyan, Magenta, Yellow and Black). This is a typical color laser printer. The toner cartridges deliver the toner to the photo conducting belt, which delivers it to the drum and then the paper. Laser printers, use a focused beam of light to reproduce the image being printed to the drum which is like photocopying.
👍 Pros:
• They are more economical, producing printed pages at a lower cost per copy.
• They more efficient than inkjet.
• The printing process is significantly quieter than inkjet
•  And overtime will not dry up and prevent use.
👎 Cons:
• They are a lot more expensive upfront then other printers.
• The required toner (ink in powdered form) costs more than standard ink cartridges.

💵 Cost:
Ranges between £110.00 and £200.00
Toner cartridge:
Prints just 700 pages. The black toner costs $50 (which works out to 7.1 cents per page), while each colour costs $55 (7.9 cents per colour, per page)
Lifespan:
Around 5 years depending on the model

# data[].attributes.body
CPU's can be divided into cores which simultaneously work independently of each other to increase efficiency of the processor.

# data[].attributes.body
1. Intel 2. Razer (AMD)

# data[].attributes.body
The capability of some types of bus architectures that allows data to be sent directly from an attached device such as a disk drive, to the memory on the computer's motherboard

# data[].attributes.body
Intel Core i5-6500 CPU @ 3.20GHz (4 cores)

# data[].attributes.headline
Source processor for a Graphics Designer:

# data[].attributes.subject
Source processor for a Graphics Designer:

# data[].attributes.body
🏆 Best CPU: Core i9-9900k @ 3.6GHz 8 cores 16 threads
https://www.ebuyer.com/859394-intel-core-i9-9900k-3-6-ghz-processor-bx80684i99900k?mkwid=s_dc&pcrid=51482416739&pkw=&pmt=&gclid=CjwKCAjwq4fsBRBnEiwANTahcIKXxd-qWsh3KGvPZdU0ERC9InkJwZKL3QNgrOWTGXmvdKTzICM3DhoCTNkQAvD_BwE

# data[].attributes.body
The unit of measurement used to measure a computer's clock speed is called a hertz (Hz). This denotes one cycle per second and measures a clock's speed. Incomputer clock speed, one hertz is equivalent to one tick per second. A computer's clock speed is normally measured in MHz (megahertz) or GHz (gigahertz).

# data[].attributes.body
It depends on the RAM slots on the mother board

# data[].attributes.headline
Most up to date RAM:  (32GB Per RAM Stick)  📝

# data[].attributes.subject
Most up to date RAM:  (32GB Per RAM Stick)  📝

# data[].attributes.body
🏆 Best RAM Stick https://www.howtogeek.com/175443/what-is-the-maximum-amount-of-ram-you-could-theoretically-put-in-a-64-bit-computer/
The current largest stick of RAM on a online retailer is 32GB. It would take 32 of these to reach 1 terabyte. At about a half inch per stick this brings us to a devoted 16 inches of space on your motherboard for a terabyte of commercial ram. To reach 16.8 million terabytes would require a motherboard 4,242.42 miles. The distance from LA to NYC is about 2141 miles, so the motherboard would stretch across the country and back to accommodate that much RAM.

# data[].attributes.body
It's important to have enough RAM for the CPU to use, otherwise it is forced to become virtual memory when the RAM runs out, which is where it is copied to the computer's secondary storage and then taken back when the RAM is free, this takes time to do and so decreases the performance. 8 Gb of RAM is the minimum requirement for a graphic designer if they're working using less intensive software, 16 Gb of RAM is the idealistic amount as having much more such as 32 Gb does not increase performance at all if the demand for RAM is under 16 Gb.

# data[].attributes.body
Static RAM (SRAM)

Dynamic RAM (DRAM)

Synchronous Dynamic RAM (SDRAM)

Single Data Rate Synchronous Dynamic RAM (SDR SDRAM)

Double Data Rate Synchronous Dynamic RAM (DDR SDRAM, DDR2, DDR3, DDR4)

Graphics Double Data Rate Synchronous Dynamic RAM (GDDR SDRAM, GDDR2, GDDR3, GDDR4, GDDR5)

Flash Memory

# data[].attributes.body
Static RAM (SRAM)

Dynamic RAM (DRAM)

Synchronous Dynamic RAM (SDRAM)

Single Data Rate Synchronous Dynamic RAM (SDR SDRAM)

Double Data Rate Synchronous Dynamic RAM (DDR SDRAM, DDR2, DDR3, DDR4)

# data[].attributes.headline
PNY NVIDIA Tesla V100 16GB HBM2 Graphics Card

# data[].attributes.subject
PNY NVIDIA Tesla V100 16GB HBM2 Graphics Card

# data[].attributes.body
£ 8,760.96 💲💲💲💲💲💲💲
https://www.ebuyer.com/815916-pny-nvidia-tesla-v100-16gb-hbm2-graphics-card-tcsv100mpcie-pb?mkwid=s_dc&pcrid=271124169057&pkw=&pmt=&gclid=EAIaIQobChMIurXfr43a5AIVw7HtCh2cHQuFEAQYASABEgKJKvD_BwE

# data[].attributes.headline
Most suitable type of graphics card for graphics work

# data[].attributes.subject
Most suitable type of graphics card for graphics work

# data[].attributes.body
Dedicated graphics cards are installed into the motherboard as an extra component and are able to operate at a higher performance compared to integrated graphics cards due to the use of their own RAM. For rendering videos and other intensive forms of graphics a dedicated card is the more suitable of the two.

# data[].attributes.headline
Source a card for a Graphics Design Machine

# data[].attributes.subject
Source a card for a Graphics Design Machine

# data[].attributes.body
🏆 Best Graphics Card:
https://www.nvidia.com/en-gb/titan/titan-rtx/

🏆 Ranking:
https://www.tomshardware.com/reviews/gpu-hierarchy,4388.html

# data[].attributes.body
Integrated:
Shares memory with the CPU and is a cheaper alternative from the stand alone cards. They can be non-programmable or programmable and also sometimes come with a graphics processing unit (GPU).

A dedicated graphics card is a piece of hardware used to manage the graphics performance of a computer. They’re sometimes also called video cards or discrete graphics.

There are lots of different types of graphics cards, but they all feature a GPU, some RAM, and a fan to keep it cool.

The benefits to graphics cards is that you can find one powerful enough for any task. They don’t share system memory, and—in most systems—are easy to upgrade. On the negative side, they’re expensive, larger, and generate a lot of heat.

You’ll usually see dedicated graphics cards in mid-range or better desktop computers. Some higher-end laptops also have them.

# data[].attributes.body
AMD Radeon R5 340X

# data[].attributes.body
Brick