# data[].attributes.body
https://docs.google.com/presentation/d/1DAHrrnJtEj40dqAmLZnznxUUa7qIsJ1l9kclPkEQC1g/edit#slide=id.gceebd266a6_0_15

a.)The vessels I researched inspired me to create a unique piece.  None of the pieces I researched had anything in common so it made me think I should make a piece unique to myself.

b.)I stuck with my same design from the beginning.  It worked well for me because of its compatibility with the cylindrical mug.

c.)My biggest challenge was trying to figure out which type of construction to use.(slab, coil or pinch)I started out with the coil method but I couldn't attach the bas to the cylinder part.

d.)A successful part of my design was how the sunset wraps around the top of the mug from the face into the inside.

# data[].attributes.body
1) this is my own design, it's inspired by the RV trip that I was planning on doing with my family

2) I used the pinch pot method, I found it easy to scrap and try again my third try I kept, I definitely improved every try.

I felt like my vessel was not the out of the box, but I liked it cause it was the first one I made and wasn't terrible.

# data[].attributes.body
Ceramics - Google Slides

a) I am not modeling it off of any specific artist, this is my own design.

b) I used a slab build technique instead of my original plan of coil building. I liked that I could get a very smooth finish with the slab.

c) The handle was challenging, I'm not sure if it will be strong enough.

# data[].attributes.body
https://docs.google.com/presentation/d/1wkkFJo6igbUh6d70bLUw0pSGCTSKj9Bgu2X_29DbPLQ/edit#slide=id.p

a) The artist I researched inspired using plants in my design.
b) I changed my design a little bit by getting rid of lines, and focusing on the vine more.
c) It was hard to map out the design I was going to do before I carved it, and I spent the most time smoothing the pot out.
d)I like the final design I did.

# data[].attributes.headline
diego hernandez                                       a) i ended up picking an artist who did the pinch method but then switched over to coil-                                             B) i i did not stick to my design becuase it wasnt working and coil ended up being easier                                                          c-getting the proportions right was defiently the hardest part it took atleast 10 tries before i got them right                     D)  the smoothness of my peace was the best

# data[].attributes.subject
diego hernandez                                       a) i ended up picking an artist who did the pinch method but then switched over to coil-                                             B) i i did not stick to my design becuase it wasnt working and coil ended up being easier                                                          c-getting the proportions right was defiently the hardest part it took atleast 10 tries before i got them right                     D)  the smoothness of my peace was the best

# data[].attributes.body
i forgot to take progress pictures so this is how i did it

first i was doing the pinch method so i made a ball and pinched the lower sides and inside but it wasnt looking good so after a bit i switched to the coil method which i thought looked better but i could get the proportions right it was either turning out way to big or way to small but after about 10 tries i hit the sweet spot and then i started ruffing up the sides to later smooth them out after i finished that i painted it and made my designs

# data[].attributes.body
https://docs.google.com/document/d/16wx7jpbncdpPrqK5fkmquaWc8RlxKn2tBEf18vQ4_-M/edit

a.) I was inspired by different people for my mug. I took inspirations from different peoples.
b.) I did my design that I made in the beginning.
c.) my biggest struggle was when I was doing the glaze it was difficult to get a good layer of glaze on my mug.
d.)I think that overall my mug is very sturdy and it was a lot easier and more fun than I had expected it to be.

# data[].attributes.body
https://docs.google.com/document/d/11ICoCWu_TIn5zIDlKdKLmwHZayl3CiNxablKjzcAnOg/edit
a) I was inspired by the general shape and structure of the artist I researched for the slab technique.
b) I stuck to my design, but made the vessel straighter than I was going to originally.
c) My paint wasn't drying as quickly as I wanted.
d) Making the design was easier than expected.

# data[].attributes.body
https://docs.google.com/presentation/d/1H7oSUKmaOBVsRNoEd3tRdUMvmA-MJnGVlK9TPGo-Puk/edit?usp=sharing

A- I researched Ruth King who inspired me to use the slab technique,

B- I had to redo my design one time because originally it was too short and I switched out the wooden spoons for flowers. I switched the images because I thought it would go better with my theme.

C- Like I said earlier I struggled with the getting the correct dimensions for my piece.

D- I think overall I ended up making a very sturdy mug that will work well for it's designated use.

# data[].attributes.body
pictures of my process- https://docs.google.com/presentation/d/1-BzOCdDT-lirtaByn7K6NHPGXTXqMB_gFPae2WAYxkE/edit?usp=sharing

a- I researched a bunch of diffrent artist but my main insperation came from watching videos in class i liked how they added aspects of their family into their pieces so i tired to do that.

b- I did not end up sticking with my original deign because i realized the deign was too big for a smaller canvas so i changed it up but still kept some aspects of my original sketch in my final piece.

c-My biggest struggle was when my piece got bone dry, that made the sgraffito part more difficult and i was afraid of it breaking from the pressure of carving.

d- i just really like how it turned out i like use of repitition in the leaves and the line useage for the stems and in the oregon outline.

# data[].attributes.body
A) I did have anyone who inspired me so I just did my own design. I chose to do the mountains because I like to ski

B) I stuck to my design because I planned it out in advanced

C) the hardest part was making the pot

D) I made the handle very sturdy

# data[].attributes.body
A) I didn't have an artist that really inspired me, so I just went with my own design.
B) Yes I did stick with my design, even if it was kinda difficult.
C) Some challenges were making it smooth, and carving my designs.
D) Some successful parts of my design was the letter G and the sun.

# data[].attributes.body
I forgot my first few pictures but I stared by taking parts of the clay and rolling them into balls to do a coil mug/bowl than once it was all together I wettened the bottom and sides a little and started to smooth it out with my thumb and popsicle stick, then I made sure there were no holes or cracks from the lines that were there and I let it dry a bit so I could start painting
A- I did not have that much insolation from my artist so I went with more of my own design and approach
B- No I did not stick to my design because I felt like it was more of a forced must draw it design so I changed it a little and went with something else that I thought looked cool
C- Probably my biggest challenge was getting the perfect straight lines on the pot
D- The double handle looks very nice and it is very strong

# data[].attributes.body
I forgot to take progress pics so this is my process: I first made 6 balls and turned them into coils and rolled them together. I then smoothed it all out and added the handle. I painted it black and added a catipillar on the handle and some flowers on the base.

3a: I did not really take a lot of inspiration from other artists but I got contrast from one of my artists.
B: I did stick to my design but i turned it into a plant pot instead because I would use it more.
C:  A challenge was probably smoothing it took a lot of time
D: I made the handle very sturdy

# data[].attributes.body
i can't put more pictures

# data[].attributes.body
A) The artist I chose to research didn't impact my design very much. She didn't make many vessels like mine, so I went with my own ideas.
B) I ended up sticking to my design, even though I thought I might have changed some things.
C) One challenge I faced while making my piece was the clay sticking to my surface when I rolled it out to form my slab.
D) I think the shape and symmetry of my design was pretty successful.

# data[].attributes.body
a. I didn't take a lot of inspo from my artist
b. I stuck to my design
c. it was difficult to get the piece smooth on the inside and its still bumpy at the bottom
d. I like the handle and the overall mug seems pretty sturdy

# data[].attributes.body
a. The artists that I researched gave me a better idea of sgraffito however I did not take much inspiration from them
b.I stuck to my design and am satisfied. That said, I would have done more layers of glazes.
c. One challenge I faced was carving away the glaze neatly.
d. I like the way my bowl looks and the symbols on it.

# data[].attributes.attachment_link.description
Create a new document and edit with others at the same time -- from your computer, phone or tablet. Get stuff done with or without an internet connection. Use Docs to edit Word files. Free from Google.

# data[].attributes.body
https://docs.google.com/presentation/d/1-fhKc_HAUhTzMo_Ypi5SS7-taEbmOHIrezIlqwlpX0o/edit#slide=id.p
The artist that I researched inspired me how tall the vessel was but then I could't do it the way the artist did it so it turned out like a  tea cup I guess the most successful part is that I carved my 3 elements.

# data[].attributes.body
https://docs.google.com/presentation/d/1gLrkdlCXnaE0IFryNmF7BL9J-1pnqWd6wUfcYxaKSqA/edit?usp=sharing

a-the pieces and artists i saw reflect in my piece by the elements i used (repetition, pattern)
b-i stuck to my design it was hard to carve tho
c-a challenge i had was shaping it
d-a successful part of making this was designing it

# data[].attributes.body
a. The artist and the sgraffito vessels that I researched inspired the shape of my mug and the principle of pattern that I used. I decided to repeat my tree design throughout my piece because I was influenced by the pinch pot vessels I saw while researching.

b. I ended up switching my design so that it better complemented my piece. I used some of the same symbols as my previous design like the sun and trees, however I didn’t keep the coffee cup and golden retriever. I decided not to do the coffee cup because it didn’t match well with the rest of my nature inspired elements, and I decided that it was too difficult to carve a golden retriever and make it look good.

c. A challenge for me was creating the shape of the mug and making sure the piece was even in height around the opening. In addition, I didn’t wrap the clay very well so when I was trying to carve it the clay was very dry and that made it more

difficult.

d. Some successful parts of my design are the size and height my mug turned out to be and the sun symbol on the handle.

# data[].attributes.body
https://docs.google.com/presentation/d/1Ru1Eb_HRsnR_nbqg1mqL2jvIoxk7vxROCD_XxLl3frU/edit?usp=sharing
a. The artists and sgraffito vessels I researched inspired me with the lines around their designs and their composure of their pieces helped me get an idea of how I wanted my piece to come together.
b. I mainly stuck to my original design but I changed some of the symbols I put on my piece.
c. A challenge for me was getting the shape of my mug to be exactly how I wanted and I had to start over a few times but eventually got the shape to be how I wanted.
d. Some of the most successful parts of my design are the facial aspects, the tongue handle , and the sgraffito flowers.

# data[].attributes.body
https://docs.google.com/presentation/d/1MwzcV09qfTcDaR0uhUtfXu664HrSwW-Ic17f4559woc/edit?usp=sharing

a. One of the artists I research put a bee as the focal point, and I liked it so I put a snake as mine.
b. instead of putting the snake around the cup I only did it on one side, so it could be more of a focal point. I also changed my third design so there could be sparkles around the snake to accentuate it.
c. the pinch technique made my vessel a little bit harder to carve into but it ended up being fine.
d. I really like the flower pattern long the top.

# data[].attributes.body
Middle sculpting the preexisting pot
End applying sgraffito

# data[].attributes.body
1) Write your name at the top of your post.
2) Post images of the beginning, middle and end stages of your sgraffito project. 3 images total. If you forgot to take a picture of one of the stages, write 4-5 sentences for that stage/ about your process.  Create one google slide with all images. make sure everyone with link can view. add that link to the padlet.
3) Under your images answer these questions:
a-How did the artist and the sgraffito vessels  you researched inspire your piece?
b-Did you stick to your design? If so what works? If not, what did you change?
c-What were some of the challenges for making the piece?
d-What are some successful parts of your design?
4) Comment 2-3 sentences on a at least 3 classmates' work using the elements and principles as a guide for your comments. Make sure your name is with the comment so you get credit. (Please use the class glossary in Canvas as a resource.)

(Drop off is Today and Tuesday 3:15- 4pm main office and Wednesday 1-3pm in the art building)