# data[].attributes.body
As you enter the tech box, there will be no lights on. Next to the door there is a button that will need to be pressed to turn on the tech box worklights

# data[].attributes.body
Next the shutters will need to be opened so you can see into the gantry and theatre space. To open the shutters there is a key which has to be turned clockwise. The purpose for these shutters is to make sure a fire doesn’t spread into the tech box or into the theatre space depending where it has started

# data[].attributes.body
When the shutters have been opened up, the theatre space will still be dark. Using the paradigm system, day mode will need to be pressed to turn the lights on. Below the day mode button is show mode. This will turn the theatre space dark. It’s important that going dark is shouted to make everyone aware so they can either stop what they’re doing if it won’t be safe in the dark, or ask to wait until they’re finished

# data[].attributes.body
The rocker switch will need to be turned on which will power on the Dlive mix rack. The GIGAaace is what connects the mixrack to the sound control surface

# data[].attributes.body
This panel is what powers the Dlive control surface for the sound system. Next to the projector switch is the sound switch at the bottom right which will need to turned on

# data[].attributes.body
Now you can power on the control surface using the switch at the back. There's a extension socket that controls the power of this control surface as well as the dante software

# data[].attributes.body
This software is called Dante is this is used to transmit audio signals to other audio systems. When you first open up the software it will only have a few transmitters and recievers.

# data[].attributes.body
To allow the speakers to appear on dante you will need to switch them on separately. There is a switch that you will need to press at the back.

# data[].attributes.body
To import audio there is a plus button near the top along the row of tools you can use. This will allow you to access all your files

# data[].attributes.body
Once you have your audio it should be highlighted and it should show the length at the bottom with the audio levels.

# data[].attributes.body
To change the fade times, press 'use intergrated fade' at the bottom right corner which leads to a yellow line to appear. To change the times of when you want it quieter or louder, simply click on the point in the audio you want to change and slide it up and down. If you bring the line up it means it's louder and if you lower the line it will be quieter. To fade in the line should go from the bottom to the top. The opposite applies to fade out where it will start from the top.