# data[].attributes.body
Welp here is what I did. Used news paper to make cut out of clay, went over it with card to make the compress the platelets of clay to build stronger foundation. Very meh.. but I hope my ideas will go well

# data[].attributes.body
In this shape, I was going for a curved cup. I Immediately realize the corners on the bottom half are way too thick in comparison to the thickness on the top half and that the floor might be a little too thin. There is also a wobble near the lip of the piece which could have been collared out.

# data[].attributes.body
The walls are sooooo unproportional and the walls thickness varies throughout the entire piece. i could have pulled more from the bottom and not made the floor so thin.

# data[].attributes.body
I could have made the wall thickness more even but my attepmte was okay. stuck my firger to far when i opened and my under cut.

# data[].attributes.body
I could have pulled more weight out of the bottom, but my overall attempt was good but maybe more height and even thickness towards the top and collar it to prevent a V-shape.

# data[].attributes.body
This bowl is most likely my best piece thus far. i could pull a bit more from bottom but shape is good and no wobbles my pull lines are pretty close togther too!

# data[].attributes.body
This is my first double bubble that has made it through the stages of throwing and trimming, with a foot front. It is very nice and I love it! Next time maybe I could trim more to inside shape and pull more weight off when I was throwing it.

# data[].attributes.body
This is my second thrown with a trimmed foot ring. My first foot ring was much better and the floor in this one is uneven so just need to fix that next time I throw. Overall cute! Not my best work tho..

# data[].attributes.body
I trimmed right through the bottom. Next time I need to be more aware of my trimming and trim more to make a change in direction. 😭😭it was a great thrown I messed up trimming tho, it’s okay next time I’ll do better!

# data[].attributes.body
I hand carved all the details in this mug and put a lot of effort and time into this. However if I didn’t have to redo the mug handle 100 times I wouldn’t have be inspired to create art on this but I finally made a handle that fits good and looks smooth over all pretty good !

# data[].attributes.body
I love this mug so good and I trimmed to inside shape and handle is really good!

# data[].attributes.body
The picture says it all

# data[].attributes.body
He threw it and I attached handle and trimmed it!

# data[].attributes.body
I needed to trim more it has some weight to it and when I throw I definitely have one more pull.

# data[].attributes.body
Very cute I like it and I threw it thin! Maybe passes marble test?

# data[].attributes.body
I shoved my fingers into clay and figured out some features I wanted.

# data[].attributes.body
I made a based fave then started to sculpt into my features and make the depth changes and differences from my starting point.

# data[].attributes.body
I did some piping work that was extremely hard and hurt my hand but I like the result and it makes my mask look interesting and non-boring.

# data[].attributes.headline
Favorite “simplistic” “ dining with royals” 

# data[].attributes.subject
Favorite “simplistic” “ dining with royals” 

# data[].attributes.body
I couldn’t attend to it do to the time taken from the movie and lecture but it was a well

Designed plate. I wish it didn’t crack but after I made two more!! This also uses the stencil with slip to create a visual element.

# data[].attributes.body
So cute can’t believe I had the skills to make it. I want to attempt to make some tea cups and made another pot but I proud of myself I’ve grown so much sense the beginning of the year!

# data[].attributes.body
So cute. Found out it was hard to make handles and learned to throw a foot ring!

# data[].attributes.body
This one turned out really good I made this all by myself and found it was difficult to clean the drainage holes.

# data[].attributes.body
I trimmed a nice foot ring

# data[].attributes.body
I had some help learning I needed to pull more weight up and out because it would be able to trim out later on.

# data[].attributes.body
I trimmed through the bottom 😱. So I patched it up with clay hope one of them comes out good.o was so sad but came up with a tacky solution.

# data[].attributes.body
Four drainage holes in this planter

# data[].attributes.body
It looks really good and I love it so much now I got to pick a glaze.

# data[].attributes.body
It has a slip underneath that I put Water blew over cause it’s a transparent glaze. I hope it comes out good!

# data[].attributes.body
I love the glaze I did I think my chip dip turned out better then I expected!!

# data[].attributes.body
Hair line crack 😭 I was running out of time and clay removers everything.

# data[].attributes.body
3 bubbles and pour spout. So cute definitely going to use to bad my matcha whisk holder got smashed but I have this bowl and it’s cute and useful!

# data[].attributes.body
Not out of bisque yet but made the same way as a chip and dip just has a closed form instead of a bowl. I hope it makes it out to be glazed next year. 🥲

# data[].attributes.body
I loved how it turned out!! So cute!!

# data[].attributes.body
I love the glaze!!!