# data[].attributes.body
- USE PERSONAL PROTECTIVE EQUIPMENT.
- TO EVERY TEST ADD THE 1.5 % OF WATER.
- MAKE A UNIFORM MIX.
- FILL IN LAYERS OF 5 CM AND EACH APPLY 56 BLOWS UNIFORM.
- TAKE A REPRESENTATIVE SAMPLE TO RECAVE DATES.

# data[].attributes.body
GUANTES = GLOVES.
MOLDE = MOLD.
LABORATORIO = LABORATORY
CASCO = HELMET.
TAPONES AUDITIVOS = EARPLUGS.

# data[].attributes.headline
THE FIRST SAMPLE WILL BE WITH NATURAL HUMIDITY

# data[].attributes.subject
THE FIRST SAMPLE WILL BE WITH NATURAL HUMIDITY

# data[].attributes.headline
IT WILL INCREASE OF 1.5% CONSECUTIVELY EACH TEST

# data[].attributes.subject
IT WILL INCREASE OF 1.5% CONSECUTIVELY EACH TEST

# data[].attributes.headline
HE AMOUNT OF WATER SHOULD NOT BE EXCEEDED

# data[].attributes.subject
HE AMOUNT OF WATER SHOULD NOT BE EXCEEDED

# data[].attributes.headline
THE EU RELATIONSHIP WILL BE CONSIDERED IN THE WEIGHTS WILL BE 1: 1

# data[].attributes.subject
THE EU RELATIONSHIP WILL BE CONSIDERED IN THE WEIGHTS WILL BE 1: 1

# data[].attributes.headline
IF YOU HAVE DEMACATED HUMIDITY, A DRYING PROCEDURE

# data[].attributes.subject
IF YOU HAVE DEMACATED HUMIDITY, A DRYING PROCEDURE

# data[].attributes.headline
THE MOISTURE SHOULD BE APPLIED IN STAGES

# data[].attributes.subject
THE MOISTURE SHOULD BE APPLIED IN STAGES

# data[].attributes.headline
EACH TEST IS NEW AND THE % OF MOISTURE IS GRADUAL

# data[].attributes.subject
EACH TEST IS NEW AND THE % OF MOISTURE IS GRADUAL

# data[].attributes.headline
SHOULD BE PROPORTIONAL TO THE AMOUNT OF SOI

# data[].attributes.subject
SHOULD BE PROPORTIONAL TO THE AMOUNT OF SOI

# data[].attributes.headline
TRY TO LOSE THE LESS POSSIBLE OF THE SAMPLE

# data[].attributes.subject
TRY TO LOSE THE LESS POSSIBLE OF THE SAMPLE

# data[].attributes.headline
ELABORATION OF REPORT WITH LABORATORY DATA

# data[].attributes.subject
ELABORATION OF REPORT WITH LABORATORY DATA

# data[].attributes.headline
MUST BE ABOVE THE GROOVE OF THE COMPLEMENT OF THE MOLD THE SAMPL

# data[].attributes.subject
MUST BE ABOVE THE GROOVE OF THE COMPLEMENT OF THE MOLD THE SAMPL