# data[].attributes.body
The bridge most likely collapsed because there wasn't enough support. The bridges in the 10 most famous bridges video had more support and were probably built better than the bridges in the 10 worst bridges video. I think that the engineers could go over their design and figure out what they did wrong or something like that.

-Ayla Reid

# data[].attributes.body
the bridge you can build it denizen it can test it.and test it and it can be important bc it can bring you to like Ohio Indiana. you go under bridges on the way to Indiana.

# data[].attributes.body
The Tacoma bridge collapsed because it needed to be more aerodynamic. The best 10 bridges had strong bases and good structure the 10 worst didn't. I think engineers could've changed the ways the bridges were built. - Alayna Carroll

# data[].attributes.body
strong winds can cause the bridge to wobble just like the picture and can cause the bridge to fall.

-Jordan Hill

# data[].attributes.body
The Tacoma bridge fell because the base of it wasen't strong enough, the very heavy wind went against it and made it catch more wind which made the whole bridge crumble

the workers should have made the base more secured the 10 best bridges had very secure bases.

-jace white

# data[].attributes.body
The Tacoma bridge collapsed because of the strong winds. The difference between the two videos and the Tacoma is that the bridges in the videos were safer. The bridges in the videos were a lot thinner than Tacoma bridge.

-Trinity Hammond

# data[].attributes.body
The engineers should have a better base on the Tacoma bridge. It also couldn't stand the hard winds. The ten famous bridges had a good base and could stand harsh winds.

-Kyleigh Jencson

# data[].attributes.headline
Reid Ward: What the engineers should do to make bridges not collapse.

# data[].attributes.subject
Reid Ward: What the engineers should do to make bridges not collapse.

# data[].attributes.body
The engineers should have a better base on the Tacoma bridge. It also couldn't stand the hard winds. The ten famous bridges had good base and could stand harsh winds.

# data[].attributes.body
The bridge needs to be aerodynamic or it will bend and fall like this video. So they need to be more aerodynamic because they won't fall. bridges are way more stable now so don't worry about driving on bridges.

-Aiden Johnson

# data[].attributes.body
the bridges most likely failed because of corrupt entreprenuers, poor quality, and no things that make the wind not make it shake

-parker emerson

# data[].attributes.body
This bridge is wobbly because of a lot of wind. the wind made the bridge wobbly. and that is why the bridge is wavy.

# data[].attributes.body
the bridge was not supported with enough support beams so that is why the bridge fell down

- Bentley Johnson

# data[].attributes.body
Wind moving over and under the bridge making it the Tacoma Bridge collapse. All of the bridges were made different and the worst ones had lots of mistakes and fell and the most famous hadn’t fallen.

By: Ellie Stewart

# data[].attributes.body
I think the Tacoma bridge fell because it needed something under it and the wind just moved it and it fell if there was a piller under it it would help it not fall

# data[].attributes.headline
Levi Kraft: Why the Tacoma Narrows bridge collapsed

# data[].attributes.subject
Levi Kraft: Why the Tacoma Narrows bridge collapsed

# data[].attributes.body
The Tacoma Narrows bridge collapsed because the bridge couldn't withstand the harsh wind. Because of this harsh wind it caused the bridge to twist. If you've seen the video the bridge isn't oscillating vertically, but in a twisting or torsional motion. Eventually it got so bad it collapsed after only four months of opening. If the workers of this bridge put a slot in the middle of the bridge it wouldn't have vibrated or twisted so much. It also would have been easy to make the deck more aerodynamic.

# data[].attributes.body
The Tacoma bridge collapsed because of two much wind and not being built right .The Tacoma Narrows bridge fell From wind .the 10 famous bridges they are different because they were made different and built more sturdier . By : Natalia.Hamilton

# data[].attributes.body
I think the reason that Tacoma Bridge collapsed because of too much wind building up.

# data[].attributes.body
The likely reason is because 1 it was not made for strong winds 2 its walls made it hard to let the wind flow through and 3 the structure was way to paper thin aswell as no support beams to strong

# data[].attributes.body
I think Tacoma Bridge collapsed because of strong winds. Evan.M

# data[].attributes.body
The Tacoma bridge collapsed because of to much wind and not being sturdy enough to hold the bridge.

The differences between the 10 most famous bridges and the 10 worst bridges in the world is that the 10 most famous bridges didn't collapse and was stable while the 10 worst bridges in the world was not stable and ended up killing or injuring people and collapsing.

I think the engineers could fix the problem with the worst bridges by making sure what hold up the bridge are stable and tightened. They should also make sure that the bridge is strong enough to hold it up when there is strong winds or heavy rain and they could make sure the bridge is strong enough by testing it in a safe area where no one is around.

-by Aniston Griffin

# data[].attributes.body
I think the Tacoma bridge collapsed because the strong winds and it was not very stable.-Brooke Edgar

# data[].attributes.body
The Tacoma bridge collapsed because it had to much stress on the strings that hold it up. The difference from the 10 most famous bridges and 10 most worst bridges fall apart and the 10 most famous brides are made so they don't fall and look good. -Benjamin hoover

# data[].attributes.body
The tacoma bridge collapsed because there was to much wind and movement that was making the bridges cables weaker and weaker.

# data[].attributes.body
the most likely reason these bridges failed was do to not being able to hold wait. the canvel bridge failed do to construction. when they were replacing the pilers underneth the bridge. when they put the temperary pilers in they could not take the weight of the bridge

# data[].attributes.body
The likely reason the Harbour Taiwon bridge collapsed was because of heavy rain and the wind. Majhat bridge collapsed because the correct measures weren't taken. The interstate 35W bridge collapsed because a piece was too thin. Parts of the Songsu Bridge wasn't welded together properly. The cables on the Miami Pedestrian weren't tightned but they did it too late. -Haylie Wiseman

# data[].attributes.body
The Tacoma bridge collapsed because of the strong winds and it was too flexible so it could not hold. The differences between the 10 most famous bridges and the 10 most terrible bridges is the 10 most famous bridges looked more sturdy and had strong supports but the 10 most terrible bridges didn't have very strong or big supports or even none at all and could also be easily collapsed by climate. The workers could have done better by adding stronger supports and a sturdier  bridge.

by:Alicia Rodriguez

# data[].attributes.body
The reason the bridge collapsed is because of the thermoplastic flutter. The reason it fell is because it could not stop moving due to the wind. If they put a space in the middle and made it more aerodynamic it would have worked. The designers had a low budget which meant they only could build it a certain way which failed.

# data[].attributes.body
The Tacoma Bridge collapsed because there was too much air moving the bridge, they should've made a hole in between the bridges to make it stable. Then they might have used a bad material.The difference is that in the worst bridges are not in the most famous bridges, I think engineers could have used different material and could've came up with better ideas.
-Brinn Tuttle

# data[].attributes.body
The Tacoma bridge collapsed because it had too much stress on the strings that hold it up.  The difference from the 10 most famous bridges and the 10 most worst bridges is 10 most worst bridges fall apart and the 10 most famous bridges are made so they don't fall and they look pretty.
- Lucy Hanish

# data[].attributes.body
The Tacoma bridge collapsed because there was too much pressure in the wind to hold it up and there were too big of gaps to hold the bridge up. The most famous bridges were built with nice steel or metal and if they were made of another material there were poles closer together to hold the weight of the bridge. The worst bridges were built with not too much structure of other materials. They were built with just some type of concrete and didn't have poles to keep it sturdy.  They could use metal or other materials to fix their bridges. - Jazmine Arledge

# data[].attributes.body
The bridges were not stable and did not have enough
structure under them.They had to big of gaps without any thing holding them up. -kayden schmeltzer

# data[].attributes.body
The Tacoma bridge collapsed because of two much wind and not being built right. The Tacoma Narrows bridge fell from the wind. With the 10 most famous bridges they are different because they are more sturdier than others.

Maximus Miller

# data[].attributes.body
The Tacoma bridge collapsed because there was to much wind and it wasn't that sturdy enough to hold up.In the top 10 bridges they showed the strongest and best bridges and in the 10 worst bridges they showed the ones that weren't sturdy and the ones that were built kinda poorly.On the 10 worst bridges I think they should have atleast tested them and made sure they were sturdy enough for people to drive on.

Noelle Kuno

# data[].attributes.body
The Tacoma Narrows bridge fell from the wind. It was not built or sturdy enough to take on wind. The 10 most famous bridges were more sturdy and allowed wind to pass though with out collapsing, but the 10 worst bridges had all collapsed not being able to take on wind and not being built right. I think the engineers should have tested the bridges before opening them to the public.

Ava Loel

# data[].attributes.body
I think the weather had something to do with the collapse and the part of the bridge that was swaying had not been built quite right, the builders made some flaws and are lucky no one got hurt. The part that was swaying should have been built with more beams, closer together.

Katelyn Hines

# data[].attributes.headline
I believe that the Tacoma bridge collapsed because of not having enough support to hold during strong winds such as the ones that made it collapse.

# data[].attributes.subject
I believe that the Tacoma bridge collapsed because of not having enough support to hold during strong winds such as the ones that made it collapse.

# data[].attributes.body
The Tacoma bring collapsed because of the wind and it was not sturdy enough to  support it. In the top 10 bridges they showed the strong and good bridges in the top 10 worst they showed the ones that were not  stable and the ones that broke and the ones that were built poorly. I think that they could have tested them and made sure they worked before bulidng it and putting people at risk.

Ava Mathes

# data[].attributes.body
The Tacoma bridge collapsed because of the strong winds that occured. It was not a stable bridge because it was not built properly. The difference between "The 10 Most Famous Bridges" and "10 Bridge Failures" the bridges on "10 bridge failures" are bridges collapsing. The bridges on "10 most famouse bridges" are the most famous bridges. A way workers can improve the bridges is make them more stable.

Annabel Hale

# data[].attributes.body
The Tacoma bridge collapsed because of two much wind and not being built right.  the top ten bridges had a lot of good bridges but my favorite was the golden gate one. the ten worst bridges could of been stopped if people would have built them better or limiting the people on the bridges at a time

Jaston Spires

# data[].attributes.body
The Tacoma Narrows bridge collapsed because of the wind. The bridge wasn't built to survive the wind. In the 10 most famous bridges they showed us strong and sturdy bridges but in the 10 bridge failures they showed us bridges that collapsed.

Grace

# data[].attributes.body
i think the biggest reason is The Tacoma Narrows Bridge collapsed primarily due to the thermoplastic flutter. In ordinary bridge design, the wind is allowed to pass through the structure by incorporating trusses. In contrast, in the case of the Tacoma Narrows Bridge, it was forced to move above and below the structure, leading to flow separation.

# data[].attributes.body
The Tacoma bridge collapsed because of the strong wind which made it collapse. With the 10 most famous bridges they are different because they are more sturdier than others. On the 10 worst bridges I think they could have done a better job on building  them and making them stronger.

by: Olivia Davis

# data[].attributes.body
The Tacoma bridge collapsed because of the weather and because it was probably not built correctly. The difference between " The 10 Most Famous Bridges" and "The 10 Worst Bridges In The World" is that "The 10 Most Famous Bridges" are famous and can handle more bad weather. "The 10 worst bridges" are the worst because they can fall by age, weather, people not watching where there going if they are pulling something, and because of the structure not being built correctly. I think that engineers could test there designs before they build it somewhere where people are going to walk and drive on.

Isabella Walters

# data[].attributes.body
I think the tacoma bridge could of worked if they had put a support beam in the center of the bridge

by: brady H

# data[].attributes.body
One of the reasons on why the Tacoma Bridge collapsed was due to the speed of the wind conditions. The aero dynamics of the bridge were poorly supported so, in effect the bridge collapsed. Another reason could also have to do with the support of the bridge. The way the bridge fell wasn't very expected for the makers but soon they would've been proven otherwise.

Mya L.

# data[].attributes.body
The Tacoma bridge collapsed because of arrow dynamics. The 10 famous bridges were built really good and the 10 worst bridges they could have built them better. They could do better arrow dynamics and build more supports.

Gage McGonigle

# data[].attributes.body
I think the bridge could have collapsed because of rushed thinking for the design process which made it not sturdy and fall.

Madi Graf

# data[].attributes.body
I think the bridges collapsed because they were not sturdy enough, they weren't aerodynamic, and some didn't have enough support

Tucker Sisterman

# data[].attributes.body
The Tacoma bridge collapsed because of the strong wind witch made is collapse. With the 10 most famous bridges they are different because they are more sturdier than others. on the 10 worst bridges I think they could have done a better job on building t hem and making them stronger.

Channing Riley

# data[].attributes.body
I think the bridges collapsed because their was not enough stability in the support towers and could not hold up against the wind

# data[].attributes.headline
Taliah Phillips, Abbie Leddingham, Kennedie West, and Alyssa Hardie

# data[].attributes.subject
Taliah Phillips, Abbie Leddingham, Kennedie West, and Alyssa Hardie

# data[].attributes.body
The Tacoma bridge collapsed because of the strong wind conditions which made it more unstable. The differences between the bridges in the two videos, the 10 most famous bridges were more sturdy and reliable than the 10 worst bridges, which were unstable.

# data[].attributes.body
The Tacoma bridge collapsed because of the wind and it was a lot more unstable . The videos are different is the brides in the two videos are stronger than the Tacoma bridge. But the bridges are a lot thinner than the Tacoma bridge.
By: Preston Young, Tim hunt,Braden Decker,Noah Seaton

# data[].attributes.headline
Coleman Kochenderfer, Urijah Day, Kolton Conrad

# data[].attributes.subject
Coleman Kochenderfer, Urijah Day, Kolton Conrad

# data[].attributes.body
The Tacoma bridge collapsed because of strong winds and it wasn't sturdy enough.  The difference between the 10 most famous bridges and the 10 worst bridges is the 10 best bridges were sturdy and could hold more weight, whereas the 10 worst bridges were old and flimsy. I think engineers could make the 10 worst bridges more sturdy by adding columns or ropes to the bottom.

# data[].attributes.headline
Kaylie Wilson, Mason Jones, Austin Gilman, Brylan Plaugher 

# data[].attributes.subject
Kaylie Wilson, Mason Jones, Austin Gilman, Brylan Plaugher 

# data[].attributes.body
The Tacoma bridge collapsed because of the strong winds. The difference between the two videos and the Tacoma is that the bridges in the videos were safer. The bridges in the videos were a lot thinner than Tacoma bridge.

# data[].attributes.headline
Evan Drury, Kaleb Draper, and Logan Carroll.

# data[].attributes.subject
Evan Drury, Kaleb Draper, and Logan Carroll.

# data[].attributes.body
The Tacoma Bridge collapsed due to high winds. The difference between the top ten best bridges and the top ten worst bridges in the world is one is talking about the safest bridges and the most dangerous bridges. We think the engineers could put posts in the ground to stable it.

# data[].attributes.headline
Keyara Kougher, Savanna Holley, and Mattie Dreher

# data[].attributes.subject
Keyara Kougher, Savanna Holley, and Mattie Dreher

# data[].attributes.body
The Tacoma Bridge collapsed do to strong wind speed. The bridges on the first video was talking about aerodynamics  and about how the bridges were made and how some of them collapsed. The second video is talking about how these bridges were made and how some of them collapsed and how they were rebuilt. Some things that engineers could do to change the designs of the worst bridges could be add lights so people can see, Add better support beams like metal and not wood, and make it more stable so people don't have to worry about falling off.

# data[].attributes.headline
Emma Strickler, Olivia Barker, Catherine Buckley

# data[].attributes.subject
Emma Strickler, Olivia Barker, Catherine Buckley

# data[].attributes.body
The Tacoma bridge collapsed because of strong winds hitting against the bridge. The bridge originally had bad aero dynamics so the wind hitting them didn't help. The ten most famous bridges are better because they are sturdier and stronger against high winds and the ten worst bridges are old and flimsy. Also, the ten best bridges can hold more weight. The engineers could make their bridges sturdier by creating multiple prototypes before they actually build their bridge.

# data[].attributes.headline
Myah Peters, Addison Kuhn, Jaycee McDonald, and Aleece Hines 

# data[].attributes.subject
Myah Peters, Addison Kuhn, Jaycee McDonald, and Aleece Hines 

# data[].attributes.body
The Tacoma bridge collapsed because of the strong winds and it was not sturdy. The difference between the top 10 most famous bridges and the top 10 worst bridges in the world is that the 10 worst bridges was very thin, flimsy, and it didn't hold a lot of weight. The 10 most famous bridges in the world held up a lot of weight and it could go throw stronger winds. The engineers could make the metal stronger and add support the middle better.

# data[].attributes.headline
Lili Reynolds, Kiley Reid, Jessica Board, and Adyson Gilbert

# data[].attributes.subject
Lili Reynolds, Kiley Reid, Jessica Board, and Adyson Gilbert

# data[].attributes.body
The Tacoma bridge collapsed because of the high winds. The bridge was also to fragile and flexible. The major difference between the two videos is that the most famous bridges are a lot more sturdy and safer than the most worst bridges. And the worst bridges are a lot more thinner and they don't have as good materials. The engineers could use stronger materials, better and safer designs, and could also support the middle of the bridges.

# data[].attributes.body
The Tacoma bridge collapsed because of strong winds and it was very fragile.  The difference between the top 10 most famous bridges and the top 10 worst bridges in the world was that the 10 best were sturdy and not as narrow whereas the worst 10 were very narrow and flimsy.  The engineer could have added stronger materials.

# data[].attributes.body
The Tacoma bridge collapsed because of strong winds and it was to flexible. The difference between the 10 most famous bridges and the 10 most worst bridges is that the 10 most famous bridges were safer than the 10 worst bridges. The engineers could add supports and more railings.

# data[].attributes.headline
Bodie Martin, Kaden Hines, Brennan Rich, Connor Sheets!!!

# data[].attributes.subject
Bodie Martin, Kaden Hines, Brennan Rich, Connor Sheets!!!

# data[].attributes.body
Tacoma bridge collapsed because of very strong winds, the winds were too much for the bridge to handle so it collapsed. The main difference between the most famous bridges and the worst bridges is that the most famous bridges are more sturdy, can withstand harsh weathers, and hold more weight. I think the engineers could add more pillars to the bridges bottom to help hold weight, they could also use better and stronger materials.

# data[].attributes.headline
Strong winds caused the Tacoma Bridge to collapse. The difference is the worst bridges can kill you but the others can keep you safe. 

# data[].attributes.subject
Strong winds caused the Tacoma Bridge to collapse. The difference is the worst bridges can kill you but the others can keep you safe. 

# data[].attributes.body
The worst bridges could add support beams.

Bridge

Isaac Tipton

# data[].attributes.body
Strong winds caused the Tacoma Bridge to collapse. The difference between the famos bridge video and the worst bridges video is that the famos bridges are more safe, because they hold more people and more cars. The  worst bridges can improve by adding more support.

~Connor Williams

# data[].attributes.body
Strong winds knocked down the Tacoma Bridge. The difference between the 10 most famous bridge video and the 10 worst bridge videos is that the famous bridges are a lot more sturdy than the worst bridges. To improve it, they could build them with  better material like metal, and put poles to hold the structure up better. Katie Kemmerling

# data[].attributes.body
42-mile per hour winds caused the Tacoma Bridge to collapse. The difference between the ten most famous and worst bridges is that the most famous bridges are safer and more sturdy than the worst ones. I think engineers could construct smaller gaps and use more sturdy resources. They could also put poles in the ground and attach it to the bridge to keep it still and sturdy.

-Andrea Cougill

# data[].attributes.body
The Tacoma bridge collapsed because of strong winds. The difference is that the bridges in The 10 most famous video , that the famous bridges is that they are much more sturdy. And they a much more recognizable than the other. You could also drive on most of these bridges. The 10 Most Terrible bridges were most of the time unstable an you had to move very slowly. These bridges were in other countries. And we think that the engineers should use sturder materials to make the bridges.

-Emma Kern, Braeleigh Blosser, And Maya Winegardner