# data[].attributes.body
Einverständniserklärung zur Kontaktaufnahme

# data[].attributes.body
wilhelm.grossmann@laerdal.com +49160-2368511

# data[].attributes.attachment_link.title
Rücksendungen and Reklamationen | Laerdal Medical

# data[].attributes.attachment_link.description
Sie haben sich umentschieden, nicht den richtigen Artikel bestellt oder erhalten? So einfach können Sie eine Bestellung an uns zurücksenden:

# data[].attributes.attachment_link.readable_text
SimPad PLUS 8.6.0

- Multilingual
06/07/2023
Updates in this release:

Easier access to help material via QR code

Improved Automatic Mode:

Scenarios using input dialoges are now supported.

Hiding events after clicking sub events is now supported.

Bug fixes in this release:

SimNewB and SimBaby: Misleading icons on arm seizure indicating movement on feet and head fixed.

Manual Mode: Fixed issue where it was not possible to add new states to a Theme if all states were removed.

SimBaby Tracheostoma: Fixed issue where intubated simulator would not have chest rise on ventilations.

Rescuci Anne Simulator with paddles would display an updating simulator message at startup.

Nursing Anne Simulator: would sometimes require double press to power down.

Resusci Anne Simulator: Fixed flow fraction calculation did not reduce score if heart rhythm was VT.

Fix for error in Japanese translation.

Fix for SimMom reporting wrong arm pulse checked.

Note:
Simulator update

Updating Nursing Anne Simulator, SimNewB and SimBaby can take up to 60 minutes. Wait for a steady green light on the manikin.

Resusci manikins the update can takes up to 5 minutes.

SimPad PLUS 8.1.9

- Multilingual
06/02/2023
Update to SimCapture regions:

Sourth Korea is added to SimCapture region.
Bug fixes:

Fix for SimMan ALS lung resistance not working correct.

Fix for virtual pacing when connected to LLEAP.

Fix for vocal sound, did not play when running adult scenario on baby mankin and the other way around.

New features, improvements and bug fixes from 8.1.0:

WiFi signal strength for simulator.

Accurate CPR score when doing ventilations and compressions at the same time.

ERC Guidelines 2021.

SimCapture select locations and capture nodes.

Fix when typing wrong password on enterprise wifi network.

Changes to manikin selection screen.

Display both custom vocal sounds from theme and default vocal sounds from manikin.

Simulator might hang on shutdown.

Manual Mode some values were not possible to add and store to theme states.

Supporting more than 8 SimCapture nodes.

SimNewB ventilation airway panel, displaying correct volume.

Saving custom adhoc WiFi channel

Adding extrasystole artifact to Anterior AMI heart rhythm.

Voice Conferencing Audio would sometime not reconnect on poor network.

Hearth rhythm icon for Sinus 60 years updated to reflect the correct ECG curve.

Warning banner for simulator connection did not automatically disappear after simulator reconnect, fixed so that user no longer has to manually dismiss.

SimNewB Lung recruitment was easier to complete on second attempt - corrected so that equal effort is required on each attempt.

Shallow and irregular chest rise on SimNewB corrected.

Fix for a problem where no CO2 curve would be shown when performing ventilations while having VFib rhythm activated .

A misleading error message that was shown when connecting to SimCapture if camera nodes were turned on has been improved .

Improved handling of loss of connection during CPR training: it is now possible to continue the CPR training after regaining a connection.

For Nursing Anne Simulator, SimNewB and SimBaby limb movement will now stop, and eyes will close when blood pressure goes to 0/0 .

Fix for an issue where sound on the Nursing Anne Simulator did not always match age and gender in session settings .

Fix for charging issues on LinkBox PLUS.

Fix for SimView/Session Viewer missing Performance tab.

Fix for SimNewB animation on Lung recruitment.

Fix for CPR not showing when using Bluetooth connection.

Improvement on VCA that stops working.

SimPad SkillReporter (BLS) fix after 8.1.0:

SimPad SkillReporter - BLS Learner Assessment storing logfile with Save & Upload button.

SimPad SkillReporter: Correction of impact of hand position on overall CPR scoring.

Fix for downgrading BLS manikins.
Note:
Simulator update

Updating Nursing Anne Simulator, SimNewB and SimBaby can take up to 60 minutes. Wait for a steady green light on the manikin.

Resusci manikins the update can takes up to 5 minutes.

SimPad Theme Editor 1.3.1

3.8 MB - English
11/10/2021

SimPad Theme Editor is a PC software tool for creating Themes for the SimPad system when operated using the Manual Mode. The program allows you to easily make new Themes with States and Interventions. The new version is no longer an online tool. Please download and install SimPad Theme Editor localy on your computer.

Dependency on Microsoft Silverlight removed, so that Theme Editor can be used without Silverlight installed.

Minor changes to user interface.

SimPad PLUS 7.4.5
Changes in this release:

Session logfiles on Standardized patient are not stores if user quits session.
Changes from version 7.4.0:

Nursing Anne Simulators will have a new option in Session Information to change the default age and gender of the manikin (per now it only affects prerecorded sounds).

Age and Gender Setup button is only visible when connected to a Nursing Anne Simulator .

Voice Conferencing Application (VCA) improvements.

Occasional aliasing on VCA has been improved.

Prerecorded sounds will in some cases sound loud through the instructor headset, a button to automatically mute instructor headset when playing prerecorded sounds has been added.

Fix Vocal sound on SimMan ALS.

Fix flow fraction score for BLS Instructor.

Fixed issue with Nursing Anne Simulator, SimNewB and SimBaby where they would sometimes not connect after running first session.

Corrected problem where SimPad would sometimes not connect to internet enabled services such as Laerdal Scenario Cloud.

Fixed ShockLink update issue where some devices would fail to update to newest version.

Note:
Updating to Windows 10?

Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor?
Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 the equipment will need to use a separate simulation network.

Windows 7
Patient monitor 8.0.0 and newer will not support Windows 7

Updating Nursing Anne Simulator, SimNewB and SimBaby take up to 20 minutes. Wait for a steady green light on the manikin.

Resusci manikins are updated with new firmware, the update takes up to 5 minutes.

# data[].attributes.attachment_link.description
SimPad PLUS 8.6.0 - Multilingual06/07/2023 Updates in this release: Easier access to help material via QR code Improved Automatic Mode: Scenarios using input dialoges are now supported. Hiding events after clicking sub events is now supported. Bug fixes in this release: SimNewB and SimBaby: Misleading icons on arm seizure indicating movement on feet and head fixed.

# data[].attributes.body
LAERDAL HELPDESK

089-864 954-0, dann die "3"

Email: helpdesk.de@laerdal.com

für die Vereinbarung von technischen Services, Fehlfunktionen etc.

# data[].attributes.attachment_link.description
Home › Downloads › Downloads for Resusci Anne Simulator

# data[].attributes.attachment_link.readable_text
Laerdal Patient Monitor v. 8.5.0

821.1 MB
22/09/2023
Changes in this release:

Bug fixes:

Fix for an issue where the Patient Monitor would reconnect to a simulator during shutdown.

SP02 can now be turned on from the Patient Monitor.

Fix for PM sometimes get covered by a box.

Laerdal Learning Application (LLEAP) v. 8.5.0

1 467.3 MB
22/09/2023
Changes in this release:

LLEAP.

If a theme or scenario has media files included, these files will now be visible directly in the Transfer Media dialogue in LLEAP.

Renaming of SimMan 3G simulators has been made easier by moving it to Customize simulator in the Simulator Firmware & Network Wizard. Previously the user had to select Configure SimMan 3G Network and walk through all the steps to configure WiFi to rename the simulator.

For SimNewB a checkbox to register that the simulator has been intubated has been added.

LLEAP can now run on Windows 10 computers where FIPS (Federal Information Processing Standard) is enabled. LLEAP has been set to be exempted and is not validated against FIPS requirements

Bug fixes:

Fix for an issue where it was not possible to upgrade SimPad to the latest version using the Simulator Firmware and Network Wizard.

Fix for Stomach "Inflate" that appeared on none suported simulators, only supported by SimJunior.

Fix for button to disable and enable stomach distention that appeared for unsupported simulators, this button is now only available for SimJunior which has this feature.

Fix for an issue on SimMan 3G where pacing did not affect the pulse.

Fix for an error preventing Windows 10 updates to be run on SimMan simulators.

Fixed an issue where the name for the "No" vocal sound had a misleading name in the French translation.

Fixed range for Sinus 60 year range, now limited to 20-200.

Fix for scenarios with Timer, the count down did not work properly.

Patient Monitor.

Bug fixes:

Fix for an issue where the Patient Monitor would reconnect to a simulator during shutdown.

SP02 can now be turned on from the Patient Monitor.

Fix for PM sometimes get covered by a box.

SimMan 3G bug fixes.

Fix for an issue where SimMan 3G simulators would not connect to open wireless networks.

Fix for an issue on SimMan 3G where pacing did not affect the pulse .

Fix for an error preventing Windows 10 updates to be run on SimMan 3G simulators.

Laerdal Patient Monitor v. 7.3.0

932.6 MB
19/07/2023

Important:

The Laerdal Patient Monitor software is compatible with LLEAP and SimPad.

Laerdal Patient Monitor software is included when you download LLEAP. This download allows you to install Laerdal Patient Monitor software without installing LLEAP on the same computer.
Changes in this release:

New version to align with LLEAP 7.3.0

General maintenance, bugfixes and improvements.

Note:
Updating to Windows 10?

Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor?
Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 the equipment will need to use a separate simulation network.

Windows 7
Laerdal Patient Monitor 7.3 will be the last version that supports Windows 7

SimDesigner v 8.5.1 Patch

2.8 MB
01/03/2023
Changes in this release:

Fix for phase without state causes software crash.

Fix for software crash when using conditions in drug.

Fix for issue when double clicking on window.

Fix for etCO2, etCo2 can't be set if unit is not mmHg.

Fix for user interface when using zoom feature

LLEAP Patch for 7.3.0

0.4 MB - English
28/07/2021

LLEAP Patch for 7.3.0, for older SimMan 3G who can't use LLEAP 8.0
This update is supplied to fix an issue where chest rise and lung sounds ceases on the SimMan 3G when used with ASL 5000 using a ventilator setting of PEEP 2 cm H2O or greater. The issue can also be resolved by upgrading to LLEAP 8.0.0. This patch should only be used if upgrade to 8.0.0 is not possible, e.g if using older SimMan 3G with XP embedded which is not supported on LLEAP 8.0.0 and onwards. Important: ASL 5000 plugin needs to be uninstalled before patch installation and reinstalled afterwards. Remember to back up custom lung models when prompted during uninstall process and import again during install process after upgrade to patch. Note:

SimMan 3G updater might need several tries before the patch is installed on simulator

Laerdal Learning Application (LLEAP) v. 7.3.0

1 526.9 MB
16/03/2021

Important:
Changes in this release:

New Device Connection Manager (DCM) application to manage network configurations more efficiently on multiple manikins.

Enhanced support for Enterprise Network Security from SFNW & for SimMan3G with Wifi USB adapter.

Fixed an issue where SimMan3G system time was not synced.

Improved simulator connection on networks with high latency.

Included WiFi driver to LLEAP installer (for SOM on SimMan3G).

Fixed an issue where the simulation wouldn't use the wanted simulation profile unless explicitly selected. Could lead to using wrong units and similar problems.

LLEAP supports transport layer security (TLS) 1.2 or greater for login to Scenario Cloud.

Fixed an issue causing help files not to work.

Note:
Updating to Windows 10?

Using SimLink or Custom ad hoc network on SimPad, and considering upgrading to Windows 10 on your computers for Laerdal Patient Monitor?
Microsoft ended their support for this type of network with the release of Windows 8. From Windows 10 on, the equipment will need to use a separate simulation network. Laerdal can help you connect all your simulation equipment to a dedicated network. Learn more and get started at Laerdal.com/Network.

Last LLEAP version supporting Windows 7

LLEAP 7.3 will be the last version that supports Windows 7.

Last version supporting old SimMan 3G family simulators

Due to end of life for Windows XP Embedded used on older SimMan3G simulators, LLEAP will no longer supported as of this version, this applies to the following simulators - unless they have been upgraded to use Windows 7:

SimMan3G simulators with serial numbers lower than 212-16140000

SimMan3G Essential simulators with serial numbers lower than 213-16140000

SimMan3G Essential Bleeding simulators with serial numbers lower than 214-1614000

Windows Update

Before installing LLEAP, to secure a successful installation, please make sure the PC is fully updated through Windows Update. If you have problems starting LLEAP after installation, please download and run Visual C++ 2015 redistributable from this location: Microsoft Visual C++ 2015 Redistributable Update 3. . Select and run vc_redist.x86 then try running LLEAP.

# data[].attributes.attachment_link.title
Downloads for LLEAP - Laerdal Learning Application

# data[].attributes.attachment_link.description
Laerdal Patient Monitor v. 8.5.0 821.1 MB22/09/2023 Changes in this release: Bug fixes: Fix for an issue where the Patient Monitor would reconnect to a simulator during shutdown. SP02 can now be turned on from the Patient Monitor. Fix for PM sometimes get covered by a box. Laerdal Learning Application (LLEAP) v.