# data[].attributes.body
Title: Your Name, "Name of Your Artwork"

1. Describe the process you used to create texture in your clay. Tell me why you used that found object and how it relates to your design.

2. Describe the 2 painting techniques you used to create texture in your painting.

3. Tell me why you chose the 2 types of yarn that you used and how they relate to your design.

4. Take a picture of your clay loom and attach it to your post.

# data[].attributes.body
1.Absent

2.I dabbed the color on my painting,I also applied the paint thick meaning I took alot  of paint on my brush and put it on my painting.

3.I chose these two colors for my yarn because my favorite color is blue,they relate to my design because my design was blue,and this relates to my design because some people’s eyes are blue.

# data[].attributes.body
1. I pressed seashells into my clay slab. I chose this object because the lines in the shells looked like waves and my design is meant to look like the sun setting over the ocean.

2. I used dabs of color to create the effect of crashing waves. With one brush, I dabbed with blue and with the other brush I dabbed with white so the colors blended. The other technique I used was applying paint thick. I chose this technique so the waves had actual texture and felt three-dimensional.

3. I chose 3 types of yarn in my weft in shades of yellow to represent the colors of the sun. I chose a fluffy yarn to represent the heat rays coming off the sun.

# data[].attributes.body
Question #1
I used a  🤬cardboard and and a sponge to create the ocean. The card board piece realtes to the ocean because they have the same bumpy texture that waves have. I used the sponge because it gave it a little bit more of texture.

Question #2
I used tints and dab colors for the waves because it gives it the bumbiness that waves have.

Question #3
I chose the white and grey yarn to make the moon because the moon is white with grey areas. They relate to the design by them having the randomness of the grey and white like the moon.

# data[].attributes.body
Maria happyfeet
3.I chosed this type of yarn because I wanted a fluffy belly and this type of bird has a fluffy belly
1.I used shells on the wings so that it would look like it was fluffy
2.l used the yellow for the nose and the texture was blending into the white. I dabbed color on the outside on the belly

# data[].attributes.headline
Karlesa Witherspoon “city land scape with fireworks “

# data[].attributes.subject
Karlesa Witherspoon “city land scape with fireworks “

# data[].attributes.body
1.I pressed a rock  into my clay slab.I chose this object because the rock creates this bumpy and rough textures. To create a side walk for the city.

2.I used the stroke technique with yellow paint to make the windows on the buildings look transparent.I also used thick painting with black and blue paint to make it look like a shiny dark night

3.I chose orange, pink, blue, purple, and green to make a firework. I chose the colors because they match the colors of the other fireworks.

# data[].attributes.body
Katherine Ready,
Chocolate Cherry Cupcake

1.I pressed cardboard into the bottom of the cupcake to
make it look like a cupcake wrapper. Then I pressed styrofoam into the top
Of the cupcake to look like the cake part of it.

2.I first blended blue and white to make a tint.
Then added a little bit of purple. Next I added thick paint on the top
of the cupcake to make it look like the cake part.Lastly I added red paint
around the cherry.

3. I chose 3 types of yarn.The first one was
a red yarn to make it look like a cherry.The second
one was a purplish red yarn.The last one was pink yarn
to make a pop of color.

# data[].attributes.body
Olivia McInnis Spongebob Squarepants
1. I pressed a bottle cap onto my clay so it looked like spongebobs circles
2. The painting techniques I used to create the texture in my painting was strokes for his pants and dots/dabs to represent the sponge look
3. The reason I used the yarn I used was because the brown was part of his pants ,the white was his shirt, red was his tie,and I used a red bead for the knot of the tie.

# data[].attributes.body
Faith Dickey's "Avocado" 🥑

1. I pressed crumpled up foil in my clay slab (after cutting it into an avocado shape). I chose this object because it looks like the rough outside of an avocado.

2. I painted the inside of the avocado with a mix of green & yellow. The outside, I used brown mixed with a LITTLE bit of black. I also added dots of lighter brown to the sides, in an attempt to capture the bumpy feeling of the side of an avocado.

3. The colors I used for my weaving, are light brown & dark brown. I used those colors so it’d look like the inside of the avocado.

# data[].attributes.body
Diego Munoz, Picture of the Valley

1. I pressed tin foil for my texture. I chose this because it gave the grass it’s spiky texture

2. I dabs of color for the grass and I did layer strokes

3. I did the fuzzy type yarn because it represent the rays of the sun. I also did the orange to represent the brightness of the sun

# data[].attributes.body
1. how I made the texture is getting the cloth that had squares on it and pressed it into the clay and I did the object because on a camera  it has a square texture to it

2.the two panting  techniques that I used in my panting is tints/shades and layering strokes

3.the two types of yarn I used is black and gray and I chose gray and black because a camera has a black middle with a little bit of gray

# data[].attributes.body
1. How I did the texture was by getting a shell and pressing it down on the sides to make a bow for the middle I put the tiny part of the shell to make the the center of the bow that keeps it together. I used the Exacto nife to make the whiskers.

2. I used layer strokes for the eye to make it darker so it doesn’t look light I used a medium sized brush so it doesn’t mess up the eye.

3. I used the black yarn because hello kitty has black eyes so I used the black yarn only and same as the only.

# data[].attributes.body
1. I used wood for the tree. I chose this object because the tree is made of wood so I used the wood.
2. I used dabs of paint on the tree to make it look rough. I used strokes of paint on the grass to make it look smooth.
3. I used yellow and orange yarn for the sun because the color of the sun is yellow and the orange is showing the fire on the sun

# data[].attributes.body
Andrew Craddock,”Blue Bird”

1.I used a piece of wood and then pressed it down to creat a furry pattern on the clay slab.I chose this object because it does a good job showing a pattern on the clay and so you could see the fur on the bird.

2.The two painting techniques I used were layer strokes and tints/shades.I used the layer strokes to show the lining of the fur and I used the tints/shades to show the light blue color on the bird.

3.Both of the types of yarn I used were blue because I wanted to keep most of the bird blue.The first one I used had a rough texture  and the second one I used was soft and a darker blue.They relate to my design by both of them being blue.

# data[].attributes.body
My name is Ally Taylor and I created Rudolph

1.     My process for the texture in my clay is I took a piece of bark and I pressed it into my clay except for the antlers.
This relates to the design because it looks like fur.
2.     Then a technique I used was different shades of brown for the fur, and then I used red then pink for the shine in the nose .
3.     I chose mainly pink and black for my weaving to represent the tongue and the dark shade inside the mouth. This relates to how I did the mouth for my weaving peace.

# data[].attributes.body
1. I rolled fabrics on and drug seashells across and I gave me like wrinkles and dents for astroids
2.  I used layered strokes and tints and shades
3. I chose the gray and the white fuzzy yarn because I did a moon and I felt those gave it depth and looked like craters

# data[].attributes.body
Sydnee soteco, taste the rainbow

1. I used a peice of cloth to make the texture because I wanted to make the wrapper to have that candy wrapper look.

2. The painting techniques I used was finger painting because I wanted to make this rainbow look and also to look like smashed m& ms and I also painted the wrapper so it could stand out of the rainbow look

3. I chose 6 types of yarn because I wanted to make the candy look rainbow and good and at the end  I put a fluffy thing so people could tell what is the candy and what is the background

# data[].attributes.body
Ashley B’s Night time ocean
1:I used sea shells for the waves and clouds then let the clay dry
2:dabs of color on the clouds and sea for a pretty and mess look
3:After that I let the pain dry
4: I started to weave a moon with fluffy wool and another type of wool

# data[].attributes.body
Noah watts ,”the eye”

1. I pressed one seashell into my eye to make a tear for the texture of the
2. one painting technique that I used in the eye is I had to mix green and red to get the perfect tan color to match my skin color sure I definitely could have made it better but I had to make 3 of them so that was the best I could do the other technique that I used  layered paint to make it thick like human skin so it would look and feel like human skin also because it makes it look nicer
3.the two types of yarn I used were black and white because those are the colors of an eye yes I did use black but I messed up on it so the white covered it up but you can see it clearly on the bottom and white around the black because everyone has white around there eyes so that is the terrible clay piece that I call the eye

# data[].attributes.headline
Sophia Carnevale; Hot Air Balloon In The Sky

# data[].attributes.subject
Sophia Carnevale; Hot Air Balloon In The Sky

# data[].attributes.body
1. To create texture in my clay, I pressed seashells into the hot air balloon to create a silky texture, I used a block with a basket-like texture for my basket, I used a toothpick to make flowy textures in the sky, and I used tinfoil to make a fluffy cloud texture for my clouds.

2. The two painting techniques I used to create texture in my painting is applying paint thick and tinting. I applied a thick coat of white paint to my clouds to express the fluffy texture and I used tinting around my basket and on the side of the hot air balloon.

3. I chose two different shades of pink for my weaving. Both of the yarns were kind of silky which goes with a hot air balloon very well. Also, my hot air balloon is pink so the pink yarn went well with it.

4.

# data[].attributes.body
Akshara Nallareddy “Mandala Flower”
1.I used a piece of fabric that had swirly patterns because I thought it resembles a flower.
2.I used the tints/shades and the dab color for my painting.
3.I chose the rough yarn because it looked like it was a middle of a flower and I chose the yellow regular yarn because it was yellow and most flowers in the inside are yellow.

# data[].attributes.body
Lindi Baum
“A Blue Star”

1. To create texture in my clay I used a fabric with wavy texture to make it more uneven, I also dragged the edge of a seashell over it in some places to represent cosmic dust.

2. Two painting techniques I used were flicking a paint brush to create stars and layers of paint to create a more blended look in some places.

3. The first yarn I used was a stringy sky blue, I used that color because I wanted to start of with blue, I used that texture of yarn because I thought it added a  little extra to the weaving. The next yarn I used was velvety and a pale blue, I used it because the color looked pretty next to the sky blue, plus the texture was soothing. The third yarn I used was a darker teal color that I added because I wanted the weaving to be a lighter near the senter and darker at the edge, it was also kind of hairy in texture and I thought that this would be nice. The fourth and final yarn I used was a plain black one I used it to add a little bit of a barrier between the painting and the weaving.

# data[].attributes.body
Allison Miller “Sunset over a field”.

1.I pressed tinfoil on to the bottom of my clay slab to create a grassy texture.
2.I created all of the colors that I used except for my grass.  To make my flowers, I used the bottem of a paint brush and dabbed the colors I created around the yellow center.
3.I chose to use three different kinds of yarn to make my moon. I chose them because they all had a different texture.  The colors used together looks like a moon to me.
4. Once I did the sunset, I used the bottem of my brush to create the stars.