# data[].attributes.attachment_link.title
Restaurant and Shop Interiors | HomeAdore | Retail store design, Shop interiors, Retail interior design

# data[].attributes.body
The problem we were presented with was the fact that everyone leaves their bag on the ground and Ms.D. trips :/ So we were asked to create a clip as an alternative for the cubbies.

# data[].attributes.body
This was a follow-up for the bag hanger a something we can use at home. Basically a hanger for home for whatever we need to hang at home:)

# data[].attributes.body
This was our Christmas Project - we chose to do whatever we want. Since I have a lot of stuff at home that I need to store somewhere, I made a "cup-thing" to store everything I need.

# data[].attributes.body
Again our Christmas Project. I live in a house with 3 other people and therefore we all have quite a lot of keys. And since the key hanger we have i basically overflowing i decided to create something that not only can we all use, but also looks modern and cool. And I also really like the fact that you can kind of have a piece of the key hanger with every single person who uses it.

# data[].attributes.body
In this project we were trusted to create a solution for the problem of too many and messy cables and chargers at our Tech Deck. We were given the Tech Deck itself and with our partners we were able to extract measurements. There were also some requirements and wishes we had to comply with too. And throughout the whole project we were able to go and test every prototype.

# data[].attributes.body
Since this is our first laser cut project we were introduced with a video lesson by Ms. D. Then we were tasked with creating our own small box.

# data[].attributes.headline
Fusion Screenshot #2 (flat/finished design + projection)

# data[].attributes.subject
Fusion Screenshot #2 (flat/finished design + projection)

# data[].attributes.headline
Prototype #1 (cardboard)(close up on tabs)

# data[].attributes.subject
Prototype #1 (cardboard)(close up on tabs)

# data[].attributes.headline
Final Prototype (plywood) (assembled but not glued)

# data[].attributes.subject
Final Prototype (plywood) (assembled but not glued)

# data[].attributes.headline
Prototype #1 (cardboard)(bottom body)(final prototype + failed)

# data[].attributes.subject
Prototype #1 (cardboard)(bottom body)(final prototype + failed)

# data[].attributes.headline
Prototype #1 (cardboard)(bottom linking piece)

# data[].attributes.subject
Prototype #1 (cardboard)(bottom linking piece)

# data[].attributes.headline
Final Cut (plywood)(in use)(without engraving)

# data[].attributes.subject
Final Cut (plywood)(in use)(without engraving)

# data[].attributes.body
Create a festival stool / chair from cardboard

Major Constraints:

→ made from cardboard

→ must be mobile - you’ve got to be able to take it with you

→you’ve got to be able to sit on it without it collapsing or tipping over

The seat is 30-50cm from the ground

# data[].attributes.body
Smushed

# data[].attributes.body
We were put up to the task to create a display we can use to display our other creations.

# data[].attributes.body
This was the first outline I created. However this was with way too much tiny details that could not be cut out.

# data[].attributes.body
Here I tried the actual screening for the first time but i messed up quite a bit. First I flipped it so it's on the wrong side. Second since the first outline was with a lot of details so a lot of them didn't keep attached to the whole design so they are simply not here.

# data[].attributes.attachment_link.title
JUNKO OKI | WORKS | ファイバーアート, テキスタイル デザイン, デザイン

# data[].attributes.attachment_link.description
あなたも Pinterest で自分だけのピンを見つけて保存しましょう！

# data[].attributes.attachment_link.title
Wall Mounted Display Case with Illumination | Wall mounted display case, Display case, Wall display case

# data[].attributes.attachment_link.description
Oct 12, 2023 - Wall Mounted Display Case with Illumination These fantastic wall mounting display cases have an illuminated back panel, making anything on display inside stand out beautifully.Ã‚Â The locking front door allows for items to be updated or removed extremely q

# data[].attributes.body
This was the second outline where i removed a lot of the details for it to be able to be cut out. I also added a line to connect the little triangle on the K so it stays.

# data[].attributes.body
These are the wood pieces I used to create the frame on the inside angles.

# data[].attributes.body
This is how I cut them.

# data[].attributes.body
I first tried making the angle frames with nails.

# data[].attributes.body
But that didn't end up working since the pieces moved.

# data[].attributes.body
So I ended up just glueing them together.

# data[].attributes.body
After I completed the 4 angles frames I attached them to the bottom, again with glue.

# data[].attributes.body
I used these wood plates to keep pressure on the wall I glued since I couldn't clip it.

# data[].attributes.body
This is how the two walls ended up looking.