# data[].attributes.body
a form of semiconductor diode in which at a critical reverse voltage a large reverse current can flow.

# data[].attributes.body
Ohm's Law defines one of most fundamental relationships in electronics. That is the relationship between Voltage, Current, and Resistance. Watt's Law defines another of the most fundamental relationships in electronics. That is the relationship between power and the quantities defined by Ohm'slaw.

# data[].attributes.body
the SI unit of power, equivalent to one joule per second, corresponding to the power in an electric circuit in which the potential difference is one volt and the current one ampere

# data[].attributes.body
A multimeter or a multitester, also known as a VOM (volt-ohm-milliammeter), is an electronic measuring instrument that combines several measurement functions in one unit. A typical multimeter can measure voltage, current, and resistance. Analog multimeters use a microammeter with a moving pointer to display readings.

# data[].attributes.body
an instrument for measuring electric potential in volts.

# data[].attributes.body
an electromotive force or potential difference expressed in volts.

# data[].attributes.body
the SI unit of electromotive force, the difference of potential that would drive one ampere of current against one ohm resistance.

# data[].attributes.body
An electronic component that is used to vary the amount of current that flows through a circuit. It works by sliding a wiper terminal across a resistive material, typically a thin film or chunk of carbon or a resistive wire made of nickel chromium or tungsten alloys.

# data[].attributes.body
an electron of an atom, located in the outermostshell (valence shell) of the atom, that can be transferred to or shared with another atom.

# data[].attributes.body
solve serious problems for a company or other organization.

# data[].attributes.body
a semiconductor device with three connections, capable of amplification in addition to rectification.

# data[].attributes.body
a device for making and breaking the connection in an electric circuit.

# data[].attributes.body
a stationary electric charge, typically produced by friction, which causes sparks or crackling or the attraction of dust or hair.

# data[].attributes.body
A breadboard is a construction base for prototyping of electronics. ... In the 1970s the solderless breadboard ( a.k.a. plugboard, a terminal array board) became available and nowadays the term "breadboard" is commonly used to refer to these. Because the solderless breadboard does not require soldering, it is reusable.

# data[].attributes.body
a device converting solar radiation into electricity.

# data[].attributes.body
The two simplest of these are called series and paralleland occur frequently. Components connected in seriesare connected along a single path, so the same current flows through all of the components. Components connected in parallel are connected along multiple paths, so the same voltage is applied to each component.

# data[].attributes.body
A series circuit is a closed circuit in which the current follows one path, as opposed to a parallelcircuit where the circuit is divided into two or more paths. In a series circuit, the current through each load is the same and the total voltage across thecircuit is the sum of the voltages across each load.

# data[].attributes.body
a device which detects or measures a physical property and records, indicates, or otherwise responds to it.

# data[].attributes.body
a solid substance that has a conductivity between that of an insulator and that of most metals, either due to the addition of an impurity or because of temperature effects. Devices made of semiconductors, notably silicon, are essential components of most electronic circuits.

# data[].attributes.body
secondary cell. noun. A rechargeable electric cell that converts chemical energy into electrical energy by a reversible chemical reaction. Also called storage cell .

# data[].attributes.body
An electronic symbol is a pictogram used to represent variouselectrical and electronic devices or functions, such as wires, batteries, resistors, and transistors, in a schematic diagram of anelectrical or electronic circuit.

# data[].attributes.body
A schematic, or schematic diagram, is a representation of the elements of a system using abstract, graphic symbols rather than realistic pictures.

# data[].attributes.body
www.slideshare.net

An electric power system is a network of electricalcomponents deployed to supply, transfer, and use electric power. An example of an electric power system is the grid that provides power to an extended area.

# data[].attributes.body
the ability to do something or act in a particular way, especially as a faculty or quality.

# data[].attributes.body
the energy possessed by a body by virtue of its position relative to others, stresses within itself, electric charge, and other factors.

# data[].attributes.body
Pneumatics (From Greek: πνεύμα) is a branch of engineering that makes use of gas or pressurized air.Pneumatic systems used in industry are commonly powered by compressed air or compressed inert gases. A centrally located and electrically powered compressor powers cylinders, air motors, and otherpneumatic devices.

# data[].attributes.body
Pascal's law is a principle in fluid mechanics that states that pressure at a point has infinite direction, and thus a pressure change at any point in a confined incompressible fluid is transmitted throughout the fluid such that the same change occurs everywhere.

# data[].attributes.body
the branch of engineering dealing with the design, construction, and use of machines.

# data[].attributes.body
In the physical sciences, mechanical energy is the sum of potential energy and kinetic energy. It is the energyassociated with the motion and position of an object.

# data[].attributes.body
the ratio of the force produced by a machine to the force applied to it, used in assessing the performance of a machine.

# data[].attributes.body
Linear motion (also called rectilinear motion) is a one-dimensional motion along a straight line, and can therefore be described mathematically using only one spatial dimension. ... In general motion, a particle's position and velocity are described by vectors, which have a magnitude and direction.

# data[].attributes.body
a rigid bar resting on a pivot, used to help move a heavy or firmly fixed load with one end when pressure is applied to the other.

# data[].attributes.body
In the physical sciences, mechanical energy is the sum of potential energy and kinetic energy. It is the energyassociated with the motion and position of an object.

# data[].attributes.body
A sloping ramp up which heavy loads can be raised by ropes or chains

# data[].attributes.body
A hydraulic drive system is a quasi-hydrostatic drive or transmission system that uses pressurized hydraulic fluid to power hydraulic machinery.

# data[].attributes.body
The horsepower (hp) is a unit in the foot-pound-second ( fps ) or English system, sometimes used to express the rate at which mechanical energy is expended. It was originally defined as 550 foot-pounds per second (ft-lb/s).

# data[].attributes.body
gear ratio in Automotive Engineering. (gɪər reɪʃoʊ) Word forms: (regular plural) gear ratios. (Automotive engineering: Vehicle components, Engine, transmission, and exhaust) The gear ratio is the ratio of the number of turns the output shaft makes when the input shaft turns once.

# data[].attributes.body
Gears are mechanisms that mesh together via teeth and are used to transmit rotary motion from one shaft to another.Gears are defined by two important items: radius and number of teeth.

# data[].attributes.body
Friction is the force resisting the relative motion of solid surfaces, fluid layers, and material elements sliding against each other.

# data[].attributes.body
Force is an exertion of pressure either focused toward or pulling away from an object, and is applied either by another object or something such as gravity or magnetism. Force is the mass of the object multiplied by its acceleration

# data[].attributes.body
A pump is a device that moves fluids (liquids or gases), or sometimes slurries, by mechanical action. Pumps can be classified into three major groups according to the method they use to move the fluid: direct lift, displacement, and gravitypumps.

# data[].attributes.body
a motor commonly of the turbine type that is driven by water or compressed air.

# data[].attributes.body
Capacity for doing work. See kinetic energy . No Dictionary Found. In the simplest terms, energy is the ability to perform work. It may exist in several forms, such as heat energy, mechanical energy, chemical energy, or electrical energy, and may be changed from one form to another.

# data[].attributes.body
Piston and cylinder, in mechanical engineering, sliding cylinder with a closed head (the piston) that is moved reciprocally in a slightly larger cylindrical chamber (the cylinder) by or against pressure of a fluid, as in an engine or pump.

# data[].attributes.body
A belt is a loop of flexible material used to link two or more rotating shafts mechanically, most often parallel. Belts may be used as a source of motion, to transmit power efficiently or to track relative movement.

# data[].attributes.body
A bearing is a machine element that constrains relative motion to only the desired motion, and reduces friction between moving parts.

# data[].attributes.body
An air compressor is a device that converts power (using an electric motor, diesel or gasoline engine, etc.) into potential energy stored in pressurized air (i.e., compressed air).

# data[].attributes.body
a device that causes a machine or other device to operate.